WizFi310_DNS_TCP_HelloWorld edited with a new Interface
Dependencies: NetworkSocketAPI WizFi310Interface mbed
Prerequisite
This example shows that Wizwiki-W7500 and WizFi310 connect to a DNS server and get a its ip address. And then, It connects to '4.ifcfg.me' that returns an ip addess as TCP client.
To implement this function, you need a Platform board and Wi-Fi board. Below are what we used.
- WIZwiki-W7500 from WIZnet (Platform board)
- WizFi310 from WIZnet (Wi-Fi board)
Hardware Configuration
WIZwiki-W7500 Pin map

- D0 is for RXD, D1 is for TXD
- D6 is for CTS, D7 is for RTS
- D9 is for RESET
WizFi310 Pin map
- J1 is for RXD, J3 is for TXD
- SW6-1 is connected to D6 for RTS, SW6-2 is connected to D7 for CTS
- SW5-3 is connected to D9 for RESET
Connect to Wi-Fi
wifi.connect(AP_SSID, AP_PASSWORD, AP_SECURITY);
Get information
const char *ip = wifi.get_ip_address(); const char *mac = wifi.get_mac_address();
Access to a 'mbed.org' website and get its ip addess
SocketAddress addr(&wifi, "mbed.org", 80);
printf("mbed.org resolved to: %s\r\n", addr.get_ip_address());
Access to a '4.ifcfg.me' as a TCP client and get its ip addess
TCPSocket socket(&wifi);
socket.connect("4.ifcfg.me", 23);
char buffer[64];
int count = socket.recv(buffer, sizeof buffer);
printf("public IP address is: %.15s\r\n", &buffer[15]);
main.cpp
- Committer:
- jehoon
- Date:
- 2016-11-14
- Revision:
- 0:2039ea1d888a
- Child:
- 1:7582323a5665
File content as of revision 0:2039ea1d888a:
/* NetworkSocketAPI Example Program
* Copyright (c) 2015 ARM Limited
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "mbed.h"
#include "TCPSocket.h"
#include "mbed.h"
#include "WizFi310Interface.h"
#include "TCPSocket.h"
#if defined(TARGET_NUCLEO_F411RE)
Serial pc(USBTX,USBRX);
WizFi310Interface wifi(PA_11, PA_12, D6, D7, D3, NC, 115200);
#endif
#define AP_SSID "<AP SSID>"
#define AP_PASSWORD "<AP Password>"
#define AP_SECURITY NSAPI_SECURITY_WPA2
int main()
{
pc.baud(115200);
printf("WizFi310 NetworkSocketAPI TCP Client Example\r\n");
wifi.connect(AP_SSID, AP_PASSWORD, AP_SECURITY);
const char *ip = wifi.get_ip_address();
const char *mac = wifi.get_mac_address();
printf("IP address is: %s\r\n", ip ? ip : "No IP");
printf("MAC address is: %s\r\n", mac ? mac : "No MAC");
SocketAddress addr(&wifi, "mbed.org", 80);
printf("mbed.org resolved to: %s\r\n", addr.get_ip_address());
TCPSocket socket(&wifi);
socket.connect("4.ifcfg.me", 23);
char buffer[64];
int count = socket.recv(buffer, sizeof buffer);
printf("public IP address is: %.15s\r\n", &buffer[15]);
socket.close();
wifi.disconnect();
printf("Done\r\n");
}