WIZnet / Mbed 2 deprecated WizFi310_DNS_TCP_HelloWorld

WizFi310_DNS_TCP_HelloWorld edited with a new Interface

Dependencies:   NetworkSocketAPI WizFi310Interface mbed

Prerequisite

This example shows that Wizwiki-W7500 and WizFi310 connect to a DNS server and get a its ip address. And then, It connects to '4.ifcfg.me' that returns an ip addess as TCP client.

To implement this function, you need a Platform board and Wi-Fi board. Below are what we used.

  • WIZwiki-W7500 from WIZnet (Platform board)
  • WizFi310 from WIZnet (Wi-Fi board)

Hardware Configuration

WIZwiki-W7500 Pin map

pin map

  • D0 is for RXD, D1 is for TXD
  • D6 is for CTS, D7 is for RTS
  • D9 is for RESET

WizFi310 Pin map

pin map

  • J1 is for RXD, J3 is for TXD
  • SW6-1 is connected to D6 for RTS, SW6-2 is connected to D7 for CTS
  • SW5-3 is connected to D9 for RESET

Connect to Wi-Fi

wifi.connect(AP_SSID, AP_PASSWORD, AP_SECURITY);

Get information

const char *ip = wifi.get_ip_address();
const char *mac = wifi.get_mac_address();

Access to a 'mbed.org' website and get its ip addess

SocketAddress addr(&wifi, "mbed.org", 80);
printf("mbed.org resolved to: %s\r\n", addr.get_ip_address());

Access to a '4.ifcfg.me' as a TCP client and get its ip addess

TCPSocket socket(&wifi);
socket.connect("4.ifcfg.me", 23);
 
char buffer[64];
int count = socket.recv(buffer, sizeof buffer);
printf("public IP address is: %.15s\r\n", &buffer[15]);

Diff: main.cpp

Revision:
0:2039ea1d888a
Child:
1:7582323a5665
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Mon Nov 14 23:28:49 2016 +0000
@@ -0,0 +1,59 @@
+/* NetworkSocketAPI Example Program
+ * Copyright (c) 2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+ 
+#include "mbed.h"
+#include "TCPSocket.h"
+#include "mbed.h"
+#include "WizFi310Interface.h"
+#include "TCPSocket.h"
+
+#if defined(TARGET_NUCLEO_F411RE)
+Serial pc(USBTX,USBRX);
+WizFi310Interface wifi(PA_11, PA_12, D6, D7, D3, NC, 115200);
+#endif
+
+#define AP_SSID "<AP SSID>"
+#define AP_PASSWORD "<AP Password>"
+#define AP_SECURITY NSAPI_SECURITY_WPA2
+
+int main()
+{
+    pc.baud(115200);
+    printf("WizFi310 NetworkSocketAPI TCP Client Example\r\n");
+    
+    wifi.connect(AP_SSID, AP_PASSWORD, AP_SECURITY);
+    
+    const char *ip = wifi.get_ip_address();
+    const char *mac = wifi.get_mac_address();
+    printf("IP address is: %s\r\n", ip ? ip : "No IP");
+    printf("MAC address is: %s\r\n", mac ? mac : "No MAC");
+
+    SocketAddress addr(&wifi, "mbed.org", 80);
+    printf("mbed.org resolved to: %s\r\n", addr.get_ip_address());
+    
+    TCPSocket socket(&wifi);
+    socket.connect("4.ifcfg.me", 23);
+ 
+    char buffer[64];
+    int count = socket.recv(buffer, sizeof buffer);
+    printf("public IP address is: %.15s\r\n", &buffer[15]);
+    
+    socket.close();
+    wifi.disconnect();
+    
+    printf("Done\r\n");
+
+}
\ No newline at end of file