ESP8266 test with W7500. You can monitor UART Tx/RX of ESP8266.
Dependencies: ESP8266Interface
Fork of ESP8266_Test by
I tested ESD-01(ESP8266 module) with WIZwiki-W7500 platform as below.
You can see the all log of this test as below. And with this ESP8266Interface class, you can monitor Tx/Rx of ESP8266 module UART.
WIZwiki-W7500 with ESP8266 Test. AT OK AT+RST OK ets Jan 8 2013,rst cause:4, boot mode:(3,6) wdt reset load 0x40100000, len 612, room 16 tail 4 chksum 0x12 load 0x3ffe8000, len 788, room 4 tail 0 chksum 0x50 load 0x3ffe8314, len 264, room 8 tail 0 chksum 0x4a csum 0x4a 2nd boot version : 1.1 SPI Speed : 40MHz SPI Mode : QIO SPI Flash Size : 4Mbit jump to run user1 s ready AT+CWDHCP=1,1 OK AT+CWMODE=1 OK AT+CWJAP="WizFiDemoAP","12345678" OK AT+CIPSTART="TCP","192.168.3.64",8000 CONNECT OK AT+CIPMODE=1 OK AT+CIPSEND >AT+CIPCLOSE CLOSED OK
main.cpp
- Committer:
- mbedAustin
- Date:
- 2015-04-30
- Revision:
- 7:d2c97b20d237
- Parent:
- 6:9ca92d1d90dd
- Child:
- 8:af3b0b5438ad
File content as of revision 7:d2c97b20d237:
#include "mbed.h" #include "ESP8266Interface.h" #include "TCPSocketConnection.h" const char* ECHO_SERVER_ADDRESS = "192.168.2.4"; const int ECHO_SERVER_PORT = 8080; ESP8266Interface wifi(D1,D0,D10,"demossid","password",115200); // TX,RX,Reset,SSID,Password RawSerial pc(USBTX, USBRX); // tx, rx int main() { pc.baud(115200); wifi.init(); //Use DHCP wifi.connect(); pc.printf("IP Address is %s\n", wifi.getIPAddress()); TCPSocketConnection socket; while (socket.connect(ECHO_SERVER_ADDRESS, ECHO_SERVER_PORT) < 0) { pc.printf("Unable to connect to (%s) on port (%d)\n", ECHO_SERVER_ADDRESS, ECHO_SERVER_PORT); wait(1); } char hello[] = "Hello World\n"; socket.send_all(hello, sizeof(hello) - 1); char buf[256]; int n = socket.receive(buf, 256); buf[n] = '\0'; pc.printf("%s", buf); socket.close(); wifi.disconnect(); while(true) {} }