ESP8266 test with W7500. You can monitor UART Tx/RX of ESP8266.
Dependencies: ESP8266Interface
Fork of ESP8266_Test by
I tested ESD-01(ESP8266 module) with WIZwiki-W7500 platform as below.
You can see the all log of this test as below. And with this ESP8266Interface class, you can monitor Tx/Rx of ESP8266 module UART.
WIZwiki-W7500 with ESP8266 Test. AT OK AT+RST OK ets Jan 8 2013,rst cause:4, boot mode:(3,6) wdt reset load 0x40100000, len 612, room 16 tail 4 chksum 0x12 load 0x3ffe8000, len 788, room 4 tail 0 chksum 0x50 load 0x3ffe8314, len 264, room 8 tail 0 chksum 0x4a csum 0x4a 2nd boot version : 1.1 SPI Speed : 40MHz SPI Mode : QIO SPI Flash Size : 4Mbit jump to run user1 s ready AT+CWDHCP=1,1 OK AT+CWMODE=1 OK AT+CWJAP="WizFiDemoAP","12345678" OK AT+CIPSTART="TCP","192.168.3.64",8000 CONNECT OK AT+CIPMODE=1 OK AT+CIPSEND >AT+CIPCLOSE CLOSED OK
main.cpp
- Committer:
- SteveKim
- Date:
- 2015-07-14
- Revision:
- 12:4e8842ddee84
- Parent:
- 9:91fe783e1dd4
File content as of revision 12:4e8842ddee84:
#include "mbed.h" #include "ESP8266Interface.h" #include "TCPSocketConnection.h" RawSerial pc(USBTX, USBRX); // tx, rx DigitalOut led1(LED1); DigitalOut led2(LED2); const char* TEST_SERVER_ADDRESS = "192.168.3.64"; const int TEST_SERVER_PORT = 8000; ESP8266Interface wifi(D1, D0, D2, "WizFiDemoAP","12345678",115200); // tx, rx // For monitoring data from ESP8266 Timeout timer_buffer_debug; CircBuffer<char> buffer_ESP8266_recv(1024); void print_buffer_ESP8266() { char c=0; while ( buffer_ESP8266_recv.available() ) { buffer_ESP8266_recv.dequeue(&c); pc.putc(c); } timer_buffer_debug.attach(&print_buffer_ESP8266, 0.1); } int main() { // LED Blink for (int i=0; i<5; i++) { led1 = 1; wait(0.1); led1 = 0; wait(0.1); } pc.baud(115200); pc.printf("\r\nWIZwiki-W7500 with ESP8266 Test. \r\n"); timer_buffer_debug.attach(&print_buffer_ESP8266, 0.5); bool result; wifi.init(); result = wifi.connect(); if ( !result ) { pc.printf("wifi.connect error\r\n"); return 0; } TCPSocketConnection socket; while (socket.connect(TEST_SERVER_ADDRESS, TEST_SERVER_PORT) < 0) { pc.printf("Unable to connect to (%s) on port (%d)\n", TEST_SERVER_ADDRESS, TEST_SERVER_PORT); wait(1); } char hello[] = "Hello World\r\n"; socket.send_all(hello, sizeof(hello) - 1); socket.close(); while(true) {} }