WIZnet / ESP8266_W7500_Example

ESP8266 test with W7500. You can monitor UART Tx/RX of ESP8266.

Dependencies:   ESP8266Interface

Fork of ESP8266_Test by ESP8266

I tested ESD-01(ESP8266 module) with WIZwiki-W7500 platform as below. /media/uploads/SteveKim/esd01.jpg

You can see the all log of this test as below. And with this ESP8266Interface class, you can monitor Tx/Rx of ESP8266 module UART.

WIZwiki-W7500 with ESP8266 Test. 
AT

OK
AT+RST

OK

 ets Jan  8 2013,rst cause:4, boot mode:(3,6)

wdt reset
load 0x40100000, len 612, room 16 
tail 4
chksum 0x12
load 0x3ffe8000, len 788, room 4 
tail 0
chksum 0x50
load 0x3ffe8314, len 264, room 8 
tail 0
chksum 0x4a
csum 0x4a

2nd boot version : 1.1
  SPI Speed      : 40MHz
  SPI Mode       : QIO
  SPI Flash Size : 4Mbit
jump to run user1

s
ready
AT+CWDHCP=1,1

OK
AT+CWMODE=1

OK
AT+CWJAP="WizFiDemoAP","12345678"

OK
AT+CIPSTART="TCP","192.168.3.64",8000
CONNECT

OK
AT+CIPMODE=1

OK
AT+CIPSEND

>AT+CIPCLOSE
CLOSED

OK

Diff: main.cpp

Revision:
8:af3b0b5438ad
Parent:
7:d2c97b20d237
Child:
9:91fe783e1dd4
--- a/main.cpp	Thu Apr 30 21:26:41 2015 +0000
+++ b/main.cpp	Fri May 01 15:40:01 2015 +0000
@@ -1,35 +1,36 @@
 #include "mbed.h"
 #include "ESP8266Interface.h"
-#include "TCPSocketConnection.h"
+#include "UDPSocket.h"
  
 const char* ECHO_SERVER_ADDRESS = "192.168.2.4";
 const int ECHO_SERVER_PORT = 8080;
 ESP8266Interface wifi(D1,D0,D10,"demossid","password",115200); // TX,RX,Reset,SSID,Password
 RawSerial pc(USBTX, USBRX); // tx, rx
- 
+
 int main() {
     pc.baud(115200);
     wifi.init(); //Use DHCP
     wifi.connect();
-    pc.printf("IP Address is %s\n", wifi.getIPAddress());
+    
+    UDPSocket sock;
+    sock.init();
     
-    TCPSocketConnection socket;
-    while (socket.connect(ECHO_SERVER_ADDRESS, ECHO_SERVER_PORT) < 0) {
-        pc.printf("Unable to connect to (%s) on port (%d)\n", ECHO_SERVER_ADDRESS, ECHO_SERVER_PORT);
-        wait(1);
-    }
+    Endpoint echo_server;
+    echo_server.set_address(ECHO_SERVER_ADDRESS, ECHO_SERVER_PORT);
     
-    char hello[] = "Hello World\n";
-    socket.send_all(hello, sizeof(hello) - 1);
+    pc.printf("\r\nESP IP: %s\r\n",wifi.getIPAddress());
+    
+    char out_buffer[] = "Hello World\n";
+    sock.sendTo(echo_server, out_buffer, sizeof(out_buffer));
     
-    char buf[256];
-    int n = socket.receive(buf, 256);
-    buf[n] = '\0';
-    pc.printf("%s", buf);
+    char in_buffer[256];
+    int n = sock.receiveFrom(echo_server, in_buffer, sizeof(in_buffer));
+    
+    in_buffer[n] = '\0';
+    pc.printf("%s\n", in_buffer);
     
-    socket.close();
-    wifi.disconnect();
+    sock.close();
     
-    while(true) {}
-}
- 
\ No newline at end of file
+    wifi.disconnect();
+    while(1) {}
+}
\ No newline at end of file