Vekatech
Lcd companion boards support (VKLCD50RTA & VKLCD70RT)
What is this ?
This is a demo program using Renesas RGA library & USB Camera to demonstrate VK-RZ/A1H's companion boards workability.
Supported companion Boards:
VKLCD50RTA
VKLCD70RT
How to Configure ?
You can choose which display is installed by altering the lcd_panel.h file
Leave the active one & comment out the others:
#define LCD_VDC5_CH0_PANEL LCD_CH0_PANEL_VKLCD50RTA //#define LCD_VDC5_CH0_PANEL LCD_CH0_PANEL_VKLCD70RT
You can alter the whole demo with your pictures if you like:
How to compile ?
- The Demo can be compiled in 3 modes:
- I. Execution from the internal 10-MB on-chip SRAM.
- II. Execution from the on-board serial FALSH in dual (32-MB) mode.
- After import in the online compiler just leave only the VKRZA1H_DOUBLE.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
- Drag & drop the result binary in MBED disk, (previously inited in double flash mode)
- III. Execution from the on-board serial FALSH in single (16-MB) mode.
- After import in the online compiler just leave only the VKRZA1H_SINGLE.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
- Drag & drop the result binary in MBED disk, (previously inited in single flash mode )
Quick presentation:
Other demos ?
More demos you can find on our FTP
Diff: hal/common/BusIn.cpp
- Revision:
- 0:6435b67ad23c
diff -r 000000000000 -r 6435b67ad23c hal/common/BusIn.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/hal/common/BusIn.cpp Thu Feb 16 10:23:48 2017 +0000
@@ -0,0 +1,97 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "BusIn.h"
+#include "mbed_assert.h"
+
+namespace mbed {
+
+BusIn::BusIn(PinName p0, PinName p1, PinName p2, PinName p3, PinName p4, PinName p5, PinName p6, PinName p7, PinName p8, PinName p9, PinName p10, PinName p11, PinName p12, PinName p13, PinName p14, PinName p15) {
+ PinName pins[16] = {p0, p1, p2, p3, p4, p5, p6, p7, p8, p9, p10, p11, p12, p13, p14, p15};
+
+ // No lock needed in the constructor
+ _nc_mask = 0;
+ for (int i=0; i<16; i++) {
+ _pin[i] = (pins[i] != NC) ? new DigitalIn(pins[i]) : 0;
+ if (pins[i] != NC) {
+ _nc_mask |= (1 << i);
+ }
+ }
+}
+
+BusIn::BusIn(PinName pins[16]) {
+ // No lock needed in the constructor
+ _nc_mask = 0;
+ for (int i=0; i<16; i++) {
+ _pin[i] = (pins[i] != NC) ? new DigitalIn(pins[i]) : 0;
+ if (pins[i] != NC) {
+ _nc_mask |= (1 << i);
+ }
+ }
+}
+
+BusIn::~BusIn() {
+ // No lock needed in the destructor
+ for (int i=0; i<16; i++) {
+ if (_pin[i] != 0) {
+ delete _pin[i];
+ }
+ }
+}
+
+int BusIn::read() {
+ int v = 0;
+ lock();
+ for (int i=0; i<16; i++) {
+ if (_pin[i] != 0) {
+ v |= _pin[i]->read() << i;
+ }
+ }
+ unlock();
+ return v;
+}
+
+void BusIn::mode(PinMode pull) {
+ lock();
+ for (int i=0; i<16; i++) {
+ if (_pin[i] != 0) {
+ _pin[i]->mode(pull);
+ }
+ }
+ unlock();
+}
+
+void BusIn::lock() {
+ _mutex.lock();
+}
+
+void BusIn::unlock() {
+ _mutex.unlock();
+}
+
+BusIn::operator int() {
+ // Underlying read is thread safe
+ return read();
+}
+
+DigitalIn& BusIn::operator[] (int index) {
+ // No lock needed since _pin is not modified outside the constructor
+ MBED_ASSERT(index >= 0 && index <= 16);
+ MBED_ASSERT(_pin[index]);
+ return *_pin[index];
+}
+
+} // namespace mbed
+