Vekatech
Lcd companion boards support (VKLCD50RTA & VKLCD70RT)
What is this ?
This is a demo program using Renesas RGA library & USB Camera to demonstrate VK-RZ/A1H's companion boards workability.
Supported companion Boards:
VKLCD50RTA
VKLCD70RT
How to Configure ?
You can choose which display is installed by altering the lcd_panel.h file
Leave the active one & comment out the others:
#define LCD_VDC5_CH0_PANEL LCD_CH0_PANEL_VKLCD50RTA //#define LCD_VDC5_CH0_PANEL LCD_CH0_PANEL_VKLCD70RT
You can alter the whole demo with your pictures if you like:
How to compile ?
- The Demo can be compiled in 3 modes:
- I. Execution from the internal 10-MB on-chip SRAM.
- II. Execution from the on-board serial FALSH in dual (32-MB) mode.
- After import in the online compiler just leave only the VKRZA1H_DOUBLE.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
- Drag & drop the result binary in MBED disk, (previously inited in double flash mode)
- III. Execution from the on-board serial FALSH in single (16-MB) mode.
- After import in the online compiler just leave only the VKRZA1H_SINGLE.sct & delete all others linker files in the TOOLCHAIN_ARM_STD folder.
- Drag & drop the result binary in MBED disk, (previously inited in single flash mode )
Quick presentation:
Other demos ?
More demos you can find on our FTP
Diff: USB/USBHost/dbg.h
- Revision:
- 0:6435b67ad23c
diff -r 000000000000 -r 6435b67ad23c USB/USBHost/dbg.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USB/USBHost/dbg.h Thu Feb 16 10:23:48 2017 +0000
@@ -0,0 +1,66 @@
+/* mbed USBHost Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef USB_DEBUG_H
+#define USB_DEBUG_H
+
+//Debug is disabled by default
+#define DEBUG 3 /*INFO,ERR,WARN*/
+#define DEBUG_TRANSFER 0
+#define DEBUG_EP_STATE 0
+#define DEBUG_EVENT 0
+
+#if (DEBUG > 3)
+#define USB_DBG(x, ...) std::printf("[USB_DBG: %s:%d]" x "\r\n", __FILE__, __LINE__, ##__VA_ARGS__);
+#else
+#define USB_DBG(x, ...)
+#endif
+
+#if (DEBUG > 2)
+#define USB_INFO(x, ...) std::printf("[USB_INFO: %s:%d]" x "\r\n", __FILE__, __LINE__, ##__VA_ARGS__);
+#else
+#define USB_INFO(x, ...)
+#endif
+
+#if (DEBUG > 1)
+#define USB_WARN(x, ...) std::printf("[USB_WARNING: %s:%d]" x "\r\n", __FILE__, __LINE__, ##__VA_ARGS__);
+#else
+#define USB_WARN(x, ...)
+#endif
+
+#if (DEBUG > 0)
+#define USB_ERR(x, ...) std::printf("[USB_ERR: %s:%d]" x "\r\n", __FILE__, __LINE__, ##__VA_ARGS__);
+#else
+#define USB_ERR(x, ...)
+#endif
+
+#if (DEBUG_TRANSFER)
+#define USB_DBG_TRANSFER(x, ...) std::printf("[USB_TRANSFER: %s:%d]" x "\r\n", __FILE__, __LINE__, ##__VA_ARGS__);
+#else
+#define USB_DBG_TRANSFER(x, ...)
+#endif
+
+#if (DEBUG_EVENT)
+#define USB_DBG_EVENT(x, ...) std::printf("[USB_EVENT: %s:%d]" x "\r\n", __FILE__, __LINE__, ##__VA_ARGS__);
+#else
+#define USB_DBG_EVENT(x, ...)
+#endif
+
+
+#endif
+
+
+