Vekatech
SDHI_driver patch (mbedOS 5.11.5)
Diff: mbed-os-program/mbed-os/targets/TARGET_RENESAS/TARGET_RZ_A1XX/TARGET_VK_RZ_A1H/device/SDHI_driver/sdhi_low.c
- Revision:
- 0:e1f465d87307
- Child:
- 1:6f9a14a6bcac
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-os-program/mbed-os/targets/TARGET_RENESAS/TARGET_RZ_A1XX/TARGET_VK_RZ_A1H/device/SDHI_driver/sdhi_low.c Mon Mar 18 16:54:40 2019 +0000
@@ -0,0 +1,1055 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+*
+* Copyright (C) 2013 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+/*******************************************************************************
+* File Name : sd_dev_low.c
+* $Rev: $
+* $Date:: $
+* Device(s) : RZ/A1H
+* Tool-Chain : DS-5 Ver 5.8
+* : ARM Complier
+* OS :
+* H/W Platform : RZ/A1H CPU Board
+* Description : RZ/A1H SD Driver Sample Program
+* Operation :
+* Limitations :
+*******************************************************************************/
+
+
+/******************************************************************************
+Includes <System Includes> , "Project Includes"
+******************************************************************************/
+#include <stdio.h>
+#include <string.h>
+#include "r_typedefs.h"
+#include "iodefine.h"
+#include "rza_io_regrw.h"
+/*#include "devdrv_intc.h"*/
+#include "sdif.h"
+#include "sd_cfg.h"
+/*#include "sd_dev_dmacdrv.h"*/
+#include "us_ticker_api.h"
+#include "cmsis_os2.h"
+#include "mbed_assert.h"
+#include "pinmap.h"
+
+
+/******************************************************************************
+Typedef definitions
+******************************************************************************/
+
+
+/******************************************************************************
+Macro definitions
+******************************************************************************/
+//#define MTU_TIMER_CNT 32 /* P-phy = 32MHz */
+#define INT_LEVEL_SDHI 10 /* SDHI interrupt level */
+#define SDHI_PINS_COMMON 2
+#define SDHI_PINS_SERIAL 3
+#define SDHI_PINS_PARALLEL 6
+
+#if defined(SDCFG_SDMODE_1BIT)
+# define SDHI_PORT_MODE SD_PORT_SERIAL
+#else
+# define SDHI_PORT_MODE SD_PORT_PARALLEL
+#endif
+
+/******************************************************************************
+Imported global variables and functions (from other files)
+******************************************************************************/
+
+
+/******************************************************************************
+Exported global variables and functions (to be accessed by other files)
+******************************************************************************/
+
+
+/******************************************************************************
+Private global variables and functions
+******************************************************************************/
+#if 0
+static uint8_t g_sdhi_priority_backup;
+#endif
+
+
+
+static const PinName SDHIpin_Common[SDHI_COUNT][SDHI_PINS_COMMON] = { /* WP & CD */
+ {P4_8, P4_9},
+ {P3_8, P3_9}
+};
+
+static const PinName SDHIpin_serial[SDHI_COUNT][SDHI_PINS_SERIAL] = { /* CLK CMD D0 */
+ {P4_11, P4_12, P4_13},
+ {P3_11, P3_12, P3_13}
+};
+
+static const PinName SDHIpin_parallel[SDHI_COUNT][SDHI_PINS_PARALLEL] = { /* CLK CMD D0-D3 */
+ {P4_10, P4_11, P4_12, P4_13, P4_14, P4_15},
+ {P3_10, P3_11, P3_12, P3_13, P3_14, P3_15}
+};
+
+
+static const PinMap PinMap_SDHI_PIN[] = {
+ /* pin | periph| func */
+ {P4_8 , SDHI_0, 3}, /* SD_CD_0 */
+ {P4_9 , SDHI_0, 3}, /* SD_WP_0 */
+ {P4_10 , SDHI_0, 3}, /* SD_D1_0 */
+ {P4_11 , SDHI_0, 3}, /* SD_D0_0 */
+ {P4_12 , SDHI_0, 3}, /* SD_CLK_0 */
+ {P4_13 , SDHI_0, 3}, /* SD_CMD_0 */
+ {P4_14 , SDHI_0, 3}, /* SD_D3_0 */
+ {P4_15 , SDHI_0, 3}, /* SD_D2_0 */
+ /*----------------*/
+ {P3_8 , SDHI_1, 7}, /* SD_CD_1 */
+ {P3_9 , SDHI_1, 7}, /* SD_WP_1 */
+ {P3_10 , SDHI_1, 7}, /* SD_D1_1 */
+ {P3_11 , SDHI_1, 7}, /* SD_D0_1 */
+ {P3_12 , SDHI_1, 7}, /* SD_CLK_1 */
+ {P3_13 , SDHI_1, 7}, /* SD_CMD_1 */
+ {P3_14 , SDHI_1, 7}, /* SD_D3_1 */
+ {P3_15 , SDHI_1, 7}, /* SD_D2_1 */
+ {NC , NC , 0}
+};
+
+
+
+static unsigned long _ulStart = 0;
+static unsigned long _ulDelta = 0;
+static const ticker_data_t *_ticker;
+
+//static int sddev_init_0(void);
+//static int sddev_init_1(void);
+//static int sddev_set_port_0(int mode);
+//static int sddev_set_port_1(int mode);
+
+static int sddev_init_dma_0(unsigned long buff,unsigned long reg,long cnt,int dir);
+static int sddev_init_dma_1(unsigned long buff,unsigned long reg,long cnt,int dir);
+
+static int sddev_wait_dma_end_0(long cnt);
+static int sddev_wait_dma_end_1(long cnt);
+
+static int sddev_disable_dma_0(void);
+static int sddev_disable_dma_1(void);
+
+static void sddev_sd_int_handler_0(uint32_t int_sense);
+static void sddev_sd_int_handler_1(uint32_t int_sense);
+static void sddev_sdio_int_handler_0(uint32_t int_sense);
+static void sddev_sdio_int_handler_1(uint32_t int_sense);
+static void sddev_start_timer(int msec);
+static void sddev_end_timer(void);
+static int sddev_check_timer(void);
+
+/******************************************************************************
+* Function Name: int sddev_cmd0_sdio_mount(int sd_port);
+* Description : Select to issue CMD0 before SDIO Mount
+* Arguments : none
+* Return Value : SD_OK : issue CMD0
+* : SD_ERR : not issue CMD0
+******************************************************************************/
+int sddev_cmd0_sdio_mount(int sd_port)
+{
+#ifdef SDCFG_IO
+ return SD_ERR;
+#else
+ return SD_ERR;
+#endif
+}
+
+/******************************************************************************
+* Function Name: int sddev_cmd8_sdio_mount(int sd_port);
+* Description : Select to issue CMD8 before SDIO Mount
+* Arguments : none
+* Return Value : SD_OK : issue CMD8
+* : SD_ERR : not issue CMD8
+******************************************************************************/
+int sddev_cmd8_sdio_mount(int sd_port)
+{
+#ifdef SDCFG_IO
+ return SD_OK;
+#else
+ return SD_ERR;
+#endif
+}
+
+
+
+/******************************************************************************
+* Function Name: int sddev_init(void);
+* Description : Initialize H/W to use SDHI
+* Arguments : none
+* Return Value : success : SD_OK
+* : fail : SD_ERR
+******************************************************************************/
+int sddev_init(int sd_port)
+{
+ if ( sd_port >= SDHI_COUNT )
+ return SD_ERR;
+
+
+ volatile uint8_t dummy_buf;
+
+ CPG.STBCR12 = 0xF0u; /* [1], [1], [1], [1], SDHI00, SDHI01, SDHI10, SDHI11 */
+ dummy_buf = CPG.STBCR12; /* (Dummy read) */
+
+
+ for( uint32_t no=0; no < SDHI_PINS_COMMON; no++ )
+ {
+ if ( pinmap_peripheral(SDHIpin_Common[sd_port][no], PinMap_SDHI_PIN ) != sd_port)
+ {
+ return SD_ERR;
+ }
+ pinmap_pinout(SDHIpin_Common[sd_port][no], PinMap_SDHI_PIN);
+ }
+
+ sddev_set_port(sd_port, SDHI_PORT_MODE);
+
+#ifdef SDCFG_HWINT
+ if ( sd_port == (uint32_t)SDHI_0 )
+ {
+ InterruptHandlerRegister(SDHI0_0_IRQn, sddev_sd_int_handler_0);
+ GIC_SetPriority(SDHI0_0_IRQn, INT_LEVEL_SDHI);
+ GIC_EnableIRQ(SDHI0_0_IRQn);
+
+ InterruptHandlerRegister(SDHI0_3_IRQn, sddev_sd_int_handler_0);
+ GIC_SetPriority(SDHI0_3_IRQn, INT_LEVEL_SDHI);
+ GIC_EnableIRQ(SDHI0_3_IRQn);
+
+ InterruptHandlerRegister(SDHI0_1_IRQn, sddev_sdio_int_handler_0);
+ GIC_SetPriority(SDHI0_1_IRQn, INT_LEVEL_SDHI);
+ GIC_EnableIRQ(SDHI0_1_IRQn);
+ }
+ else if ( sd_port == (uint32_t)SDHI_1 )
+ {
+ InterruptHandlerRegister(SDHI1_0_IRQn, sddev_sd_int_handler_1);
+ GIC_SetPriority(SDHI1_0_IRQn, INT_LEVEL_SDHI);
+ GIC_EnableIRQ(SDHI1_0_IRQn);
+
+ InterruptHandlerRegister(SDHI1_3_IRQn, sddev_sd_int_handler_1);
+ GIC_SetPriority(SDHI1_3_IRQn, INT_LEVEL_SDHI);
+ GIC_EnableIRQ(SDHI1_3_IRQn);
+
+ InterruptHandlerRegister(SDHI1_1_IRQn, sddev_sdio_int_handler_1);
+ GIC_SetPriority(SDHI1_1_IRQn, INT_LEVEL_SDHI);
+ GIC_EnableIRQ(SDHI1_1_IRQn);
+ }
+#endif
+
+ /* ---- wait card detect ---- */
+ osDelay(1000); /* wait 1s */
+
+ return SD_OK;
+}
+
+
+/******************************************************************************
+* Function Name: int sddev_power_on(int sd_port);
+* Description : Power-on H/W to use SDHI
+* Arguments : none
+* Return Value : success : SD_OK
+* : fail : SD_ERR
+******************************************************************************/
+int sddev_power_on(int sd_port)
+{
+ /* ---Power On SD ---- */
+
+ /* ---- Wait for SD Wake up ---- */
+ osDelay(100); /* wait 100ms */
+
+ return SD_OK;
+}
+
+/******************************************************************************
+* Function Name: int sddev_power_off(int sd_port);
+* Description : Power-off H/W to use SDHI
+* Arguments : none
+* Return Value : success : SD_OK
+* : fail : SD_ERR
+******************************************************************************/
+int sddev_power_off(int sd_port)
+{
+ return SD_OK;
+}
+
+/******************************************************************************
+* Function Name: int sddev_read_data(int sd_port, unsigned char *buff,unsigned long reg_addr,long num);
+* Description : read from SDHI buffer FIFO
+* Arguments : unsigned char *buff : buffer addrees to store reading datas
+* : unsigned long reg_addr : SDIP FIFO address
+* : long num : counts to read(unit:byte)
+* Return Value : success : SD_OK
+* : fail : SD_ERR
+******************************************************************************/
+int sddev_read_data(int sd_port, unsigned char *buff,unsigned long reg_addr,long num)
+{
+ long i;
+ long cnt;
+ unsigned long *reg;
+ unsigned long *ptr_l;
+ unsigned char *ptr_c;
+ unsigned long tmp;
+
+ reg = (unsigned long *)(reg_addr);
+
+ cnt = (num / 4);
+ if(((unsigned long)buff & 0x3) != 0)
+ {
+ ptr_c = (unsigned char *)buff;
+ for(i = cnt; i > 0 ; i--)
+ {
+ tmp = *reg;
+ *ptr_c++ = (unsigned char)(tmp);
+ *ptr_c++ = (unsigned char)(tmp >> 8);
+ *ptr_c++ = (unsigned char)(tmp >> 16);
+ *ptr_c++ = (unsigned char)(tmp >> 24);
+ }
+
+ cnt = (num % 4);
+ if( cnt != 0 )
+ {
+ tmp = *reg;
+ for(i = cnt; i > 0 ; i--)
+ {
+ *ptr_c++ = (unsigned char)(tmp);
+ tmp >>= 8;
+ }
+ }
+ }
+ else
+ {
+ ptr_l = (unsigned long *)buff;
+ for(i = cnt; i > 0 ; i--)
+ {
+ *ptr_l++ = *reg;
+ }
+
+ cnt = (num % 4);
+ if( cnt != 0 )
+ {
+ ptr_c = (unsigned char *)ptr_l;
+ tmp = *reg;
+ for(i = cnt; i > 0 ; i--)
+ {
+ *ptr_c++ = (unsigned char)(tmp);
+ tmp >>= 8;
+ }
+ }
+ }
+
+ return SD_OK;
+}
+
+/******************************************************************************
+* Function Name: int sddev_write_data(int sd_port, unsigned char *buff,unsigned long reg_addr,long num);
+* Description : write to SDHI buffer FIFO
+* Arguments : unsigned char *buff : buffer addrees to store writting datas
+* : unsigned long reg_addr : SDIP FIFO address
+* : long num : counts to write(unit:byte)
+* Return Value : success : SD_OK
+* : fail : SD_ERR
+******************************************************************************/
+int sddev_write_data(int sd_port, unsigned char *buff,unsigned long reg_addr,long num)
+{
+ long i;
+ unsigned long *reg = (unsigned long *)(reg_addr);
+ unsigned long *ptr = (unsigned long *)buff;
+ unsigned long tmp;
+
+ /* dont care non 4byte allignment data */
+ num += 3;
+ num /= 4;
+ if(((unsigned long)buff & 0x3) != 0)
+ {
+ for(i = num; i > 0 ; i--)
+ {
+ tmp = *buff++ ;
+ tmp |= *buff++ << 8;
+ tmp |= *buff++ << 16;
+ tmp |= *buff++ << 24;
+ *reg = tmp;
+ }
+ }
+ else
+ {
+ for(i = num; i > 0 ; i--)
+ {
+ *reg = *ptr++;
+ }
+ }
+
+ return SD_OK;
+}
+
+/******************************************************************************
+* Function Name: unsigned int sddev_get_clockdiv(int sd_port, int clock);
+* Description : write to SDHI buffer FIFO
+* Arguments : int clock : request clock frequency
+* : SD_CLK_50MHz
+* : SD_CLK_25MHz
+* : SD_CLK_20MHz
+* : SD_CLK_10MHz
+* : SD_CLK_5MHz
+* : SD_CLK_1MHz
+* : SD_CLK_400kHz
+* Return Value : clock div value
+* : SD_DIV_2 : 1/2 clock
+* : SD_DIV_2 : 1/4 clock
+* : SD_DIV_2 : 1/8 clock
+* : SD_DIV_2 : 1/16 clock
+* : SD_DIV_2 : 1/128 clock
+* : SD_DIV_2 : 1/256 clock
+******************************************************************************/
+unsigned int sddev_get_clockdiv(int sd_port, int clock)
+{
+ unsigned int div;
+
+ switch(clock)
+ {
+ case SD_CLK_50MHz:
+ div = SD_DIV_2; /* 64MHz/2 = 32MHz */
+ break;
+ case SD_CLK_25MHz:
+ div = SD_DIV_4; /* 64MHz/4 = 16MHz */
+ break;
+ case SD_CLK_20MHz:
+ div = SD_DIV_4; /* 64MHz/4 = 16MHz */
+ break;
+ case SD_CLK_10MHz:
+ div = SD_DIV_8; /* 64MHz/8 = 8MHz */
+ break;
+ case SD_CLK_5MHz:
+ div = SD_DIV_16; /* 64MHz/16 = 4MHz */
+ break;
+ case SD_CLK_1MHz:
+ div = SD_DIV_128; /* 64MHz/128 = 512kHz */
+ break;
+ case SD_CLK_400kHz:
+ div = SD_DIV_256; /* 64MHz/256 = 256kHz */
+ break;
+ default:
+ div = SD_DIV_256;
+ break;
+ }
+
+ return div;
+}
+
+/******************************************************************************
+* Function Name: int sddev_set_port(int sd_port, int mode);
+* Description : setting ports to use MMCHI
+* Arguments : int mode : SD_PORT_PARALLEL : 4bit mode
+* : SD_PORT_SERIAL : 1bit mode
+* Return Value : success : SD_OK
+* : fail : SD_ERR
+******************************************************************************/
+int sddev_set_port(int sd_port, int mode)
+{
+ if ( sd_port >= SDHI_COUNT)
+ return SD_ERR;
+
+ if(mode == SD_PORT_SERIAL)
+ {
+ for( uint32_t no=0; no < SDHI_PINS_SERIAL; no++ )
+ {
+ if ( pinmap_peripheral(SDHIpin_serial[sd_port][no], PinMap_SDHI_PIN ) != sd_port)
+ {
+ return SD_ERR;
+ }
+ pinmap_pinout(SDHIpin_serial[sd_port][no], PinMap_SDHI_PIN);
+ }
+ }
+ else if( mode == SD_PORT_PARALLEL )
+ {
+ for( uint32_t no=0; no < SDHI_PINS_PARALLEL; no++ )
+ {
+ if ( pinmap_peripheral(SDHIpin_parallel[sd_port][no], PinMap_SDHI_PIN ) != sd_port)
+ {
+ return SD_ERR;
+ }
+ pinmap_pinout(SDHIpin_parallel[sd_port][no], PinMap_SDHI_PIN);
+ }
+ }
+ else
+ {
+ return SD_ERR;
+ }
+
+ return SD_OK;
+}
+
+
+/******************************************************************************
+* Function Name: int sddev_int_wait(int sd_port, int time);
+* Description : Waitting for SDHI Interrupt
+* Arguments : int time : time out value to wait interrupt
+* Return Value : get interrupt : SD_OK
+* : time out : SD_ERR
+******************************************************************************/
+int sddev_int_wait(int sd_port, int time)
+{
+ sddev_start_timer(time);
+ while( sddev_check_timer() == SD_OK )
+ {
+ /* interrupt generated? */
+ if(sd_check_int(sd_port) == SD_OK)
+ {
+ sddev_end_timer();
+ return SD_OK;
+ }
+ }
+
+ sddev_end_timer();
+
+ return SD_ERR;
+}
+
+/******************************************************************************
+* Function Name: int sddev_init_dma(unsigned long buff,unsigned long reg,long cnt,int dir);
+* Description : Initialize DMAC to transfer data from SDHI FIFO
+* Arguments : unsigned long buff : buffer addrees to transfer datas
+* : unsigned long reg : SDIP FIFO address
+* : long cnt : counts to transfer(unit:byte)
+* : int dir : direction to transfer
+* : : 0 : FIFO -> buffer
+* : : 1 : buffer -> FIFO
+* Return Value : success : SD_OK
+* : fail : SD_ERR
+******************************************************************************/
+int sddev_init_dma(int sd_port, unsigned long buff,unsigned long reg,long cnt,int dir)
+{
+ int ret;
+
+ if( sd_port == 0 )
+ {
+ ret = sddev_init_dma_0(buff, reg, cnt, dir);
+ }
+ else if( sd_port == 1 )
+ {
+ ret = sddev_init_dma_1(buff, reg, cnt, dir);
+ }
+
+ return ret;
+}
+
+/******************************************************************************
+* Function Name: static int sddev_init_dma_0(unsigned long buff,unsigned long reg,long cnt,int dir);
+* Description : Initialize DMAC to transfer data from SDHI FIFO
+* Arguments : unsigned long buff : buffer addrees to transfer datas
+* : unsigned long reg : SDIP FIFO address
+* : long cnt : counts to transfer(unit:byte)
+* : int dir : direction to transfer
+* : : 0 : FIFO -> buffer
+* : : 1 : buffer -> FIFO
+* Return Value : success : SD_OK
+* : fail : SD_ERR
+******************************************************************************/
+static int sddev_init_dma_0(unsigned long buff,unsigned long reg,long cnt,int dir)
+{
+#ifdef SDCFG_TRNS_DMA
+ dmac_transinfo_t trans_info;
+ uint32_t request_factor;
+ int32_t ret;
+
+ trans_info.count = (uint32_t)cnt;
+ #ifdef SDCFG_TRANS_DMA_64
+ if( (cnt % 64) != 0 )
+ {
+ trans_info.src_size = DMAC_TRANS_SIZE_32;
+ trans_info.dst_size = DMAC_TRANS_SIZE_32;
+ if( reg & 0x0000003f )
+ {
+ trans_info.src_size = DMAC_TRANS_SIZE_32;
+ trans_info.dst_size = DMAC_TRANS_SIZE_32;
+ }
+ }
+ else
+ {
+ trans_info.src_size = DMAC_TRANS_SIZE_512;
+ trans_info.dst_size = DMAC_TRANS_SIZE_512;
+ }
+ #else
+ trans_info.src_size = DMAC_TRANS_SIZE_32;
+ trans_info.dst_size = DMAC_TRANS_SIZE_32;
+ #endif
+
+ if( dir == 0 )
+ {
+ request_factor = DMAC_REQ_SDHI_0_RX;
+ trans_info.src_addr = (uint32_t)reg;
+ trans_info.dst_addr = (uint32_t)buff;
+ trans_info.saddr_dir = DMAC_TRANS_ADR_NO_INC;
+ trans_info.daddr_dir = DMAC_TRANS_ADR_INC;
+ }
+ else if( dir == 1 )
+ {
+ request_factor = DMAC_REQ_SDHI_0_TX;
+ trans_info.src_addr = (uint32_t)buff;
+ trans_info.dst_addr = (uint32_t)reg;
+ trans_info.saddr_dir = DMAC_TRANS_ADR_INC;
+ trans_info.daddr_dir = DMAC_TRANS_ADR_NO_INC;
+ }
+
+ sd_DMAC1_PeriReqInit( (const dmac_transinfo_t *)&trans_info,
+ DMAC_MODE_REGISTER,
+ DMAC_SAMPLE_SINGLE,
+ request_factor,
+ 0 ); /* Dont care DMAC_REQ_REQD is setting in usb0_host_DMAC1_PeriReqInit() */
+
+ ret = sd_DMAC1_Open(DMAC_REQ_MODE_PERI);
+ if( ret != 0 )
+ {
+ printf("DMAC1 Open error!!\n");
+ return SD_ERR;
+ }
+#endif
+
+ return SD_OK;
+}
+
+/******************************************************************************
+* Function Name: static int sddev_init_dma_1(unsigned long buff,unsigned long reg,long cnt,int dir);
+* Description : Initialize DMAC to transfer data from SDHI FIFO
+* Arguments : unsigned long buff : buffer address to transfer datas
+* : unsigned long reg : SDIP FIFO address
+* : long cnt : counts to transfer(unit:byte)
+* : int dir : direction to transfer
+* : : 0 : FIFO -> buffer
+* : : 1 : buffer -> FIFO
+* Return Value : success : SD_OK
+* : fail : SD_ERR
+******************************************************************************/
+static int sddev_init_dma_1(unsigned long buff,unsigned long reg,long cnt,int dir)
+{
+#ifdef SDCFG_TRNS_DMA
+ dmac_transinfo_t trans_info;
+ uint32_t request_factor;
+ int32_t ret;
+
+ trans_info.count = (uint32_t)cnt;
+ #ifdef SDCFG_TRANS_DMA_64
+ if( (cnt % 64) != 0 )
+ {
+ trans_info.src_size = DMAC_TRANS_SIZE_32;
+ trans_info.dst_size = DMAC_TRANS_SIZE_32;
+ if( reg & 0x0000003f )
+ {
+ trans_info.src_size = DMAC_TRANS_SIZE_32;
+ trans_info.dst_size = DMAC_TRANS_SIZE_32;
+ }
+ }
+ else
+ {
+ trans_info.src_size = DMAC_TRANS_SIZE_512;
+ trans_info.dst_size = DMAC_TRANS_SIZE_512;
+ }
+ #else
+ trans_info.src_size = DMAC_TRANS_SIZE_32;
+ trans_info.dst_size = DMAC_TRANS_SIZE_32;
+ #endif
+
+ if( dir == 0 )
+ {
+ request_factor = DMAC_REQ_SDHI_1_RX;
+ trans_info.src_addr = (uint32_t)reg;
+ trans_info.dst_addr = (uint32_t)buff;
+ trans_info.saddr_dir = DMAC_TRANS_ADR_NO_INC;
+ trans_info.daddr_dir = DMAC_TRANS_ADR_INC;
+ }
+ else if( dir == 1 )
+ {
+ request_factor = DMAC_REQ_SDHI_1_TX;
+ trans_info.src_addr = (uint32_t)buff;
+ trans_info.dst_addr = (uint32_t)reg;
+ trans_info.saddr_dir = DMAC_TRANS_ADR_INC;
+ trans_info.daddr_dir = DMAC_TRANS_ADR_NO_INC;
+ }
+
+ sd_DMAC2_PeriReqInit( (const dmac_transinfo_t *)&trans_info,
+ DMAC_MODE_REGISTER,
+ DMAC_SAMPLE_SINGLE,
+ request_factor,
+ 0 ); /* Dont care DMAC_REQ_REQD is setting in usb0_host_DMAC1_PeriReqInit() */
+
+ ret = sd_DMAC2_Open(DMAC_REQ_MODE_PERI);
+ if( ret != 0 )
+ {
+ printf("DMAC1 Open error!!\n");
+ return SD_ERR;
+ }
+#endif
+
+ return SD_OK;
+}
+
+/******************************************************************************
+* Function Name: int sddev_wait_dma_end(int sd_port, long cnt);
+* Description : Wait to complete DMAC transfer
+* Arguments : long cnt : counts to transfer(unit:byte)
+* Return Value : success : SD_OK
+* : fail : SD_ERR
+******************************************************************************/
+int sddev_wait_dma_end(int sd_port, long cnt)
+{
+ int ret;
+
+ if( sd_port == 0 )
+ {
+ ret = sddev_wait_dma_end_0(cnt);
+ }
+ else if( sd_port == 1 )
+ {
+ ret = sddev_wait_dma_end_1(cnt);
+ }
+
+ return ret;
+}
+
+/******************************************************************************
+* Function Name: static int sddev_wait_dma_end_0(long cnt);
+* Description : Wait to complete DMAC transfer
+* Arguments : long cnt : counts to transfer(unit:byte)
+* Return Value : success : SD_OK
+* : fail : SD_ERR
+******************************************************************************/
+static int sddev_wait_dma_end_0(long cnt)
+{
+#ifdef SDCFG_TRNS_DMA
+ int loop;
+ int time;
+
+ time = (cnt / 512);
+ time = ((time * 1000) / 1024);
+ if(time < 1000)
+ {
+ time = 1000;
+ }
+
+ if(time > (0x0000ffff / MTU_TIMER_CNT))
+ {
+ /* @1000ms */
+ loop = (time / 1000);
+ if( (time % 1000) != 0 )
+ {
+ loop++;
+ }
+ time = 1000;
+ }
+ else
+ {
+ loop = 1;
+ }
+
+ do{
+ sddev_start_timer(time);
+
+ while(1)
+ {
+ /* get end flag? */
+ if( sd_DMAC1_Get_Endflag() == 1 )
+ {
+ sddev_end_timer();
+ return SD_OK;
+ }
+ /* detect timeout? */
+ if(sddev_check_timer() == SD_ERR)
+ {
+ break;
+ }
+ }
+
+ loop--;
+ if( loop <= 0 )
+ {
+ break;
+ }
+
+ } while(1);
+
+ sddev_end_timer();
+
+ return SD_ERR;
+#else
+ return SD_OK;
+
+#endif
+}
+
+/******************************************************************************
+* Function Name: static int sddev_wait_dma_end_1(long cnt);
+* Description : Wait to complete DMAC transfer
+* Arguments : long cnt : counts to transfer(unit:byte)
+* Return Value : success : SD_OK
+* : fail : SD_ERR
+******************************************************************************/
+static int sddev_wait_dma_end_1(long cnt)
+{
+#ifdef SDCFG_TRNS_DMA
+ int loop;
+ int time;
+
+ time = (cnt / 512);
+ time = ((time * 1000) / 1024);
+ if(time < 1000)
+ {
+ time = 1000;
+ }
+
+ if(time > (0x0000ffff / MTU_TIMER_CNT))
+ {
+ /* @1000ms */
+ loop = (time / 1000);
+ if( (time % 1000) != 0 )
+ {
+ loop++;
+ }
+ time = 1000;
+ }
+ else
+ {
+ loop = 1;
+ }
+
+ do{
+ sddev_start_timer(time);
+
+ while(1)
+ {
+ /* get end flag? */
+ if( sd_DMAC2_Get_Endflag() == 1 )
+ {
+ sddev_end_timer();
+ return SD_OK;
+ }
+ /* detect timeout? */
+ if(sddev_check_timer() == SD_ERR)
+ {
+ break;
+ }
+ }
+
+ loop--;
+ if( loop <= 0 )
+ {
+ break;
+ }
+
+ } while(1);
+
+ sddev_end_timer();
+
+ return SD_ERR;
+#else
+ return SD_OK;
+
+#endif
+}
+
+/******************************************************************************
+* Function Name: int sddev_disable_dma(int sd_port);
+* Description : Disable DMAC transfer
+* Arguments : none
+* Return Value : success : SD_OK
+* : fail : SD_ERR
+******************************************************************************/
+int sddev_disable_dma(int sd_port)
+{
+ int ret;
+
+ if( sd_port == 0 )
+ {
+ ret = sddev_disable_dma_0();
+ }
+ else
+ {
+ ret = sddev_disable_dma_1();
+ }
+ return ret;
+}
+
+/******************************************************************************
+* Function Name: static int sddev_disable_dma_0(void);
+* Description : Disable DMAC transfer
+* Arguments : none
+* Return Value : success : SD_OK
+* : fail : SD_ERR
+******************************************************************************/
+static int sddev_disable_dma_0(void)
+{
+#ifdef SDCFG_TRNS_DMA
+ uint32_t remain;
+
+ sd_DMAC1_Close(&remain);
+#endif
+ return SD_OK;
+}
+
+/******************************************************************************
+* Function Name: staticint sddev_disable_dma_1(void);
+* Description : Disable DMAC transfer
+* Arguments : none
+* Return Value : success : SD_OK
+* : fail : SD_ERR
+******************************************************************************/
+static int sddev_disable_dma_1(void)
+{
+#ifdef SDCFG_TRNS_DMA
+ uint32_t remain;
+
+ sd_DMAC2_Close(&remain);
+#endif
+ return SD_OK;
+}
+
+/******************************************************************************
+* Function Name: int sddev_loc_cpu(int sd_port);
+* Description : lock cpu to disable interrupt
+* Arguments : none
+* Return Value : success : SD_OK
+* : fail : SD_ERR
+******************************************************************************/
+int sddev_loc_cpu(int sd_port)
+{
+#if 0
+ R_INTC_GetMaskLevel(&g_sdhi_priority_backup);
+ R_INTC_SetMaskLevel(0);
+ core_util_critical_section_enter();
+#endif
+
+ return SD_OK;
+}
+
+/******************************************************************************
+* Function Name: int sddev_unl_cpu(int sd_port);
+* Description : unlock cpu to enable interrupt
+* Arguments : none
+* Return Value : success : SD_OK
+* : fail : SD_ERR
+******************************************************************************/
+int sddev_unl_cpu(int sd_port)
+{
+#if 0
+ R_INTC_SetMaskLevel(g_sdhi_priority_backup);
+ core_util_critical_section_exit();
+#endif
+ return SD_OK;
+}
+
+/******************************************************************************
+* Function Name: int sddev_finalize(int sd_port);
+* Description : finalize SDHI
+* Arguments : none
+* Return Value : none
+******************************************************************************/
+int sddev_finalize(int sd_port)
+{
+ return SD_OK;
+}
+
+/******************************************************************************
+* Function Name: static void sddev_sd_int_handler_0(uint32_t int_sense);
+* Description : Setting Interrupt function for SDHI(INTC_ID_SDHI0_0,INTC_ID_SDHI0_3)
+* Arguments : Interrupt mode
+* Return Value : none
+******************************************************************************/
+static void sddev_sd_int_handler_0(uint32_t int_sense)
+{
+ sd_int_handler(0);
+}
+
+/******************************************************************************
+* Function Name: static void sddev_sd_int_handler_1(uint32_t int_sense);
+* Description : Setting Interrupt function for SDHI(INTC_ID_SDHI0_0,INTC_ID_SDHI0_3)
+* Arguments : Interrupt mode
+* Return Value : none
+******************************************************************************/
+static void sddev_sd_int_handler_1(uint32_t int_sense)
+{
+ sd_int_handler(1);
+}
+
+/******************************************************************************
+* Function Name: static void sddev_sdio_int_handler_0(uint32_t int_sense);
+* Description : Setting Interrupt function for SDHI(INTC_ID_SDHI0_1)
+* Arguments : Interrupt mode
+* Return Value : none
+******************************************************************************/
+static void sddev_sdio_int_handler_0(uint32_t int_sense)
+{
+ sdio_int_handler(0);
+}
+
+/******************************************************************************
+* Function Name: static void sddev_sdio_int_handler_1(uint32_t int_sense);
+* Description : Setting Interrupt function for SDHI(INTC_ID_SDHI1_1)
+* Arguments : Interrupt mode
+* Return Value : none
+******************************************************************************/
+static void sddev_sdio_int_handler_1(uint32_t int_sense)
+{
+ sdio_int_handler(1);
+}
+
+/******************************************************************************
+* Function Name: static void sddev_start_timer(int msec);
+* Description : start timer
+* Arguments :
+* Return Value : none
+******************************************************************************/
+static void sddev_start_timer(int msec)
+{
+ _ticker = get_us_ticker_data();
+ _ulStart = ticker_read(_ticker);
+ _ulDelta = msec*1000ul;
+}
+
+/******************************************************************************
+* Function Name: static void sddev_end_timer(void);
+* Description : end timer
+* Arguments :
+* Return Value : none
+******************************************************************************/
+static void sddev_end_timer(void)
+{
+ _ulStart = 0ul;
+ _ulDelta = 0ul;
+}
+
+/******************************************************************************
+* Function Name: static int sddev_check_timer(void);
+* Description : check
+* Arguments :
+* Return Value : t
+******************************************************************************/
+static int sddev_check_timer(void)
+{
+ if ( _ulStart && _ulDelta )
+ {
+ return ((ticker_read(_ticker)-_ulStart) < _ulDelta) ? SD_OK : SD_ERR;
+ }
+ else
+ {
+ return SD_ERR;
+ }
+}
+
+/* End of File */
+