Vekatech
SDHI_driver patch (mbedOS 5.11.5)
Diff: mbed-os-program/mbed-os/components/storage/blockdevice/COMPONENT_RZ_SDHI/driver/sdif.h
- Revision:
- 2:7c75ab32d7c9
diff -r b07be64e592e -r 7c75ab32d7c9 mbed-os-program/mbed-os/components/storage/blockdevice/COMPONENT_RZ_SDHI/driver/sdif.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-os-program/mbed-os/components/storage/blockdevice/COMPONENT_RZ_SDHI/driver/sdif.h Fri Mar 29 19:47:34 2019 +0200
@@ -0,0 +1,329 @@
+/******************************************************************************
+* DISCLAIMER
+*
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized.
+*
+* This software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+*
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES
+* REGARDING THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY,
+* INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+* PARTICULAR PURPOSE AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY
+* DISCLAIMED.
+*
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
+* FOR ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS
+* AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+*
+* Renesas reserves the right, without notice, to make changes to this
+* software and to discontinue the availability of this software.
+* By using this software, you agree to the additional terms and
+* conditions found by accessing the following link:
+* http://www.renesas.com/disclaimer
+********************************************************************************
+* Copyright (C) 2013 Renesas Electronics Corporation. All rights reserved.
+**************************** Technical reference data **************************
+* System Name : SD Driver Sample Program
+* File Name : sdif.h
+* Abstract : SD Memory card driver configration
+* Version : 4.00.00
+* Device : Aragon
+* Tool-Chain : DS-5 Ver 5.13
+* ARM Complier
+* OS : None
+* H/W Platform:
+* Description :
+********************************************************************************
+* History : 2013.07.12 Ver.4.00.00
+*******************************************************************************/
+#ifndef _SDDRV_H_
+#define _SDDRV_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* ==== define ==== */
+/* ---- SD Driver work buffer ---- */
+#define SD_SIZE_OF_INIT 800
+
+/* ---- error code ---- */
+#define SD_OK_LOCKED_CARD 1 /* OK but card is locked status */
+#define SD_OK 0 /* OK */
+#define SD_ERR -1 /* general error */
+#define SD_ERR_WP -2 /* write protect error */
+#define SD_ERR_RO -3 /* read only error */
+#define SD_ERR_RES_TOE -4 /* response time out error */
+#define SD_ERR_CARD_TOE -5 /* card time out error */
+#define SD_ERR_END_BIT -6 /* end bit error */
+#define SD_ERR_CRC -7 /* CRC error */
+#define SD_ERR_CARD_RES -8 /* card response error */
+#define SD_ERR_HOST_TOE -9 /* host time out error */
+#define SD_ERR_CARD_ERASE -10 /* card erase error */
+#define SD_ERR_CARD_LOCK -11 /* card lock error */
+#define SD_ERR_CARD_UNLOCK -12 /* card unlock error */
+#define SD_ERR_HOST_CRC -13 /* host CRC error */
+#define SD_ERR_CARD_ECC -14 /* card internal ECC error */
+#define SD_ERR_CARD_CC -15 /* card internal error */
+#define SD_ERR_CARD_ERROR -16 /* unknown card error */
+#define SD_ERR_CARD_TYPE -17 /* non support card type */
+#define SD_ERR_NO_CARD -18 /* no card */
+#define SD_ERR_ILL_READ -19 /* illegal buffer read */
+#define SD_ERR_ILL_WRITE -20 /* illegal buffer write */
+#define SD_ERR_AKE_SEQ -21 /* the sequence of authentication process */
+#define SD_ERR_OVERWRITE -22 /* CID/CSD overwrite error */
+/* 23-29 */
+#define SD_ERR_CPU_IF -30 /* target CPU interface function error */
+#define SD_ERR_STOP -31 /* user stop */
+/* 32-49 */
+#define SD_ERR_CSD_VER -50 /* CSD register version error */
+#define SD_ERR_SCR_VER -51 /* SCR register version error */
+#define SD_ERR_FILE_FORMAT -52 /* CSD register file format error */
+#define SD_ERR_NOTSUP_CMD -53 /* not supported command */
+/* 54-59 */
+#define SD_ERR_ILL_FUNC -60 /* invalid function request error */
+#define SD_ERR_IO_VERIFY -61 /* direct write verify error */
+#define SD_ERR_IO_CAPAB -62 /* IO capability error */
+/* 63-69 */
+#define SD_ERR_IFCOND_VER -70 /* Interface condition version error */
+#define SD_ERR_IFCOND_VOLT -71 /* Interface condition voltage error */
+#define SD_ERR_IFCOND_ECHO -72 /* Interface condition echo back pattern error */
+/* 73-79 */
+#define SD_ERR_OUT_OF_RANGE -80 /* the argument was out of range */
+#define SD_ERR_ADDRESS_ERROR -81 /* misassigned address */
+#define SD_ERR_BLOCK_LEN_ERROR -82 /* transfered block length is not allowed */
+#define SD_ERR_ILLEGAL_COMMAND -83 /* Command not legal */
+#define SD_ERR_RESERVED_ERROR18 -84 /* Reserved bit 18 Error */
+#define SD_ERR_RESERVED_ERROR17 -85 /* Reserved bit 17 Error */
+#define SD_ERR_CMD_ERROR -86 /* SD_INFO2 bit 0 CMD error */
+#define SD_ERR_CBSY_ERROR -87 /* SD_INFO2 bit 14 CMD Type Reg Busy error */
+#define SD_ERR_NO_RESP_ERROR -88 /* SD_INFO1 bit 0 No Response error */
+/* 89 */
+/* 90-95 */
+#define SD_ERR_ERROR -96 /* SDIO ERROR */
+#define SD_ERR_FUNCTION_NUMBER -97 /* SDIO FUNCTION NUMBER ERROR */
+#define SD_ERR_COM_CRC_ERROR -98 /* SDIO CRC ERROR */
+#define SD_ERR_INTERNAL -99 /* driver software internal error */
+
+/* ---- driver mode ---- */
+#define SD_MODE_POLL 0x0000ul /* status check mode is software polling */
+#define SD_MODE_HWINT 0x0001ul /* status check mode is hardware interrupt */
+#define SD_MODE_SW 0x0000ul /* data transfer mode is software */
+#define SD_MODE_DMA 0x0002ul /* data transfer mode is DMA */
+#define SD_MODE_DMA_64 0x0004ul /* data transfer mode is DMA with 64 byte burst mode */
+
+/* ---- support mode ---- */
+#define SD_MODE_MEM 0x0000ul /* memory cards only are supported */
+#define SD_MODE_IO 0x0010ul /* memory and io cards are supported */
+#define SD_MODE_COMBO 0x0030ul /* memory ,io and combo cards are supported */
+#define SD_MODE_DS 0x0000ul /* only default speed mode is supported */
+#define SD_MODE_HS 0x0040ul /* high speed mode is also supported */
+#define SD_MODE_VER1X 0x0000ul /* ver1.1 host */
+#define SD_MODE_VER2X 0x0080ul /* ver2.x host (high capacity and dual voltage) */
+#define SD_MODE_1BIT 0x0100ul /* SD Mode 1bit only is supported */
+#define SD_MODE_4BIT 0x0000ul /* SD Mode 1bit and 4bit is supported */
+
+/* ---- media voltage ---- */
+#define SD_VOLT_1_7 0x00000010ul /* low voltage card minimum */
+#define SD_VOLT_1_8 0x00000020ul
+#define SD_VOLT_1_9 0x00000040ul
+#define SD_VOLT_2_0 0x00000080ul
+#define SD_VOLT_2_1 0x00000100ul /* basic communication minimum */
+#define SD_VOLT_2_2 0x00000200ul
+#define SD_VOLT_2_3 0x00000400ul
+#define SD_VOLT_2_4 0x00000800ul
+#define SD_VOLT_2_5 0x00001000ul
+#define SD_VOLT_2_6 0x00002000ul
+#define SD_VOLT_2_7 0x00004000ul
+#define SD_VOLT_2_8 0x00008000ul /* memory access minimum */
+#define SD_VOLT_2_9 0x00010000ul
+#define SD_VOLT_3_0 0x00020000ul
+#define SD_VOLT_3_1 0x00040000ul
+#define SD_VOLT_3_2 0x00080000ul
+#define SD_VOLT_3_3 0x00100000ul
+#define SD_VOLT_3_4 0x00200000ul
+#define SD_VOLT_3_5 0x00400000ul
+#define SD_VOLT_3_6 0x00800000ul
+
+/* ---- memory card write mode ---- */
+#define SD_WRITE_WITH_PREERASE 0x0000u /* pre-erease write */
+#define SD_WRITE_OVERWRITE 0x0001u /* overwrite */
+
+/* ---- io register write mode ---- */
+#define SD_IO_SIMPLE_WRITE 0x0000u /* just write */
+#define SD_IO_VERIFY_WRITE 0x0001u /* read after write */
+
+/* ---- io operation code ---- */
+#define SD_IO_FIXED_ADDR 0x0000u /* R/W fixed address */
+#define SD_IO_INCREMENT_ADDR 0x0001u /* R/W increment address */
+#define SD_IO_FORCE_BYTE 0x0010u /* byte access only */
+
+ /* ---- media type ---- */
+#define SD_MEDIA_UNKNOWN 0x0000u /* unknown media */
+#define SD_MEDIA_MMC 0x0010u /* MMC card */
+#define SD_MEDIA_SD 0x0020u /* SD Memory card */
+#define SD_MEDIA_IO 0x0001u /* SD IO card */
+#define SD_MEDIA_MEM 0x0030u /* Memory card */
+#define SD_MEDIA_COMBO 0x0021u /* SD COMBO card */
+#define SD_MEDIA_EMBEDDED 0x8000u /* embedded media */
+
+/* ---- write protect info --- */
+#define SD_WP_OFF 0x0000u /* card is not write protect */
+#define SD_WP_HW 0x0001u /* card is H/W write protect */
+#define SD_WP_TEMP 0x0002u /* card is TEMP_WRITE_PROTECT */
+#define SD_WP_PERM 0x0004u /* card is PERM_WRITE_PROTECT */
+#define SD_WP_ROM 0x0010u /* card is SD-ROM */
+
+/* ---- SD clock div ---- */ /* IMCLK is host controller clock */
+#define SD_DIV_512 0x0080u /* SDCLOCK = IMCLK/512 */
+#define SD_DIV_256 0x0040u /* SDCLOCK = IMCLK/256 */
+#define SD_DIV_128 0x0020u /* SDCLOCK = IMCLK/128 */
+#define SD_DIV_64 0x0010u /* SDCLOCK = IMCLK/64 */
+#define SD_DIV_32 0x0008u /* SDCLOCK = IMCLK/32 */
+#define SD_DIV_16 0x0004u /* SDCLOCK = IMCLK/16 */
+#define SD_DIV_8 0x0002u /* SDCLOCK = IMCLK/8 */
+#define SD_DIV_4 0x0001u /* SDCLOCK = IMCLK/4 */
+#define SD_DIV_2 0x0000u /* SDCLOCK = IMCLK/2 */
+#define SD_DIV_1 0x00FFu /* SDCLOCK = IMCLK (option) */
+
+/* ---- SD clock define ---- */ /* max frequency */
+#define SD_CLK_400kHz 0x0000u /* 400kHz */
+#define SD_CLK_1MHz 0x0001u /* 1MHz */
+#define SD_CLK_5MHz 0x0002u /* 5MHz */
+#define SD_CLK_10MHz 0x0003u /* 10MHz */
+#define SD_CLK_20MHz 0x0004u /* 20MHz */
+#define SD_CLK_25MHz 0x0005u /* 25MHz */
+#define SD_CLK_50MHz 0x0006u /* 50MHz (phys spec ver1.10) */
+
+/* ---- speed class ---- */
+#define SD_SPEED_CLASS_0 0x00u /* not defined, or less than ver2.0 */
+#define SD_SPEED_CLASS_2 0x01u /* 2MB/sec */
+#define SD_SPEED_CLASS_4 0x02u /* 4MB/sec */
+#define SD_SPEED_CLASS_6 0x03u /* 6MB/sec */
+
+/* ---- IO initialize flags define ---- */ /* add for IO */
+#define SD_IO_INT_ENAB 0x10u /* interrupt enable */
+#define SD_IO_POWER_INIT 0x04u /* power on initialized */
+#define SD_IO_MEM_INIT 0x02u /* memory initialized */
+#define SD_IO_FUNC_INIT 0x01u /* io func initialized */
+
+/* ---- IO function's information ---- */ /* add for IO */
+#define SD_IO_FUNC_READY 0x80u /* io redy */
+#define SD_IO_FUNC_NUM 0x70u /* number of io func */
+#define SD_IO_FUNC_EXISTS 0x04u /* memory present */
+
+/* ---- SD port mode ---- */
+#define SD_PORT_SERIAL 0x0000u /* 1bit mode */
+#define SD_PORT_PARALLEL 0x0001u /* 4bits mode */
+
+/* ---- SD Card detect port ---- */
+#define SD_CD_SOCKET 0x0000u /* CD pin */
+#define SD_CD_DAT3 0x0001u /* DAT3 pin */
+
+/* ---- SD Card detect interrupt ---- */
+#define SD_CD_INT_DISABLE 0x0000u /* card detect interrupt disable */
+#define SD_CD_INT_ENABLE 0x0001u /* card detect interrupt enable */
+
+/* ---- format mode ---- */
+#define SD_FORMAT_QUICK 0x0000u /* quick format */
+#define SD_FORMAT_FULL 0x0001u /* full format */
+
+/* ---- lock/unlock mode ---- */
+#define SD_FORCE_ERASE 0x08
+#define SD_LOCK_CARD 0x04
+#define SD_UNLOCK_CARD 0x00
+#define SD_CLR_PWD 0x02
+#define SD_SET_PWD 0x01
+
+/* ==== API prototype ===== */
+/* ---- access library I/F ---- */
+int sd_init(int sd_port, unsigned long base, void *workarea, int cd_port);
+int sd_cd_int(int sd_port, int enable,int (*callback)(int, int));
+int sd_check_media(int sd_port);
+int sd_format(int sd_port, int mode,int (*callback)(unsigned long,unsigned long));
+int sd_format2(int sd_port, int mode,unsigned long volserial,int (*callback)(unsigned long,unsigned long));
+int sd_mount(int sd_port, unsigned long mode,unsigned long voltage);
+int sd_read_sect(int sd_port, unsigned char *buff,unsigned long psn,long cnt);
+int sd_write_sect(int sd_port, unsigned char *buff,unsigned long psn,long cnt,int writemode);
+int sd_get_type(int sd_port, unsigned char *type,unsigned char *speed,unsigned char *capa);
+int sd_get_size(int sd_port, unsigned long *user,unsigned long *protect);
+int sd_iswp(int sd_port);
+int sd_unmount(int sd_port);
+void sd_stop(int sd_port);
+int sd_set_intcallback(int sd_port, int (*callback)(int, int));
+void sd_int_handler(int sd_port);
+int sd_get_error(int sd_port);
+int sd_check_int(int sd_port);
+int sd_get_reg(int sd_port, unsigned char *ocr,unsigned char *cid,unsigned char *csd, unsigned char *dsr,unsigned char *scr);
+int sd_get_rca(int sd_port, unsigned char *rca);
+int sd_get_sdstatus(int sd_port, unsigned char *sdstatus);
+int sd_get_speed(int sd_port, unsigned char *clss,unsigned char *move);
+int sd_finalize(int sd_port);
+int sd_set_seccnt(int sd_port, short sectors);
+int sd_get_seccnt(int sd_port);
+int sd_get_ver(int sd_port, unsigned short *sdhi_ver,char *sddrv_ver);
+int sd_set_cdtime(int sd_port, unsigned short cdtime);
+int sd_set_responsetime(int sd_port, unsigned short responsetime);
+int sd_set_buffer(int sd_port, void *buff,unsigned long size);
+int sd_inactive(int sd_port);
+int sd_set_softwp(int sd_port, int is_set,unsigned long data);
+int sd_set_tmpwp(int sd_port, int is_set);
+int sd_lock_unlock(int sd_port, unsigned char code,unsigned char *pwd,unsigned char len);
+
+int esd_get_partition_id(int sd_port, int *id);
+int esd_select_partition(int sd_port, int id);
+int esd_query_partition(int sd_port, int sub, unsigned char *data);
+
+int sdio_read_direct(int sd_port, unsigned char *buff,unsigned long func,unsigned long adr);
+int sdio_write_direct(int sd_port, unsigned char *buff,unsigned long func,unsigned long adr,unsigned long raw_flag);
+int sdio_check_int(int sd_port);
+void sdio_int_handler(int sd_port);
+int sdio_set_intcallback(int sd_port, int (*callback)(int));
+int sdio_enable_int(int sd_port);
+int sdio_disable_int(int sd_port);
+int sdio_read(int sd_port, unsigned char *buff,unsigned long func,unsigned long adr,long cnt,unsigned long op_code);
+int sdio_write(int sd_port, unsigned char *buff,unsigned long func,unsigned long adr,long cnt,unsigned long op_code);
+int sdio_reset(int sd_port);
+int sdio_get_ioocr(int sd_port, unsigned long *ioocr);
+int sdio_get_ioinfo(int sd_port, unsigned char *ioinfo);
+int sdio_get_cia(int sd_port, unsigned char *reg, unsigned char *cis, unsigned long func_num, long cnt);
+int sdio_set_enable(int sd_port, unsigned char func_bit);
+int sdio_get_ready(int sd_port, unsigned char *func_bit);
+int sdio_set_int(int sd_port, unsigned char func_bit,int enab);
+int sdio_get_int(int sd_port, unsigned char *func_bit,int *enab);
+int sdio_set_blocklen(int sd_port, unsigned short len, unsigned long func_num);
+int sdio_get_blocklen(int sd_port, unsigned short *len, unsigned long func_num);
+void sdio_abort(int sd_port, unsigned long func_num);
+int sdio_set_blkcnt(int sd_port, short blocks);
+int sdio_get_blkcnt(int sd_port);
+
+/* ---- target CPU I/F ---- */
+int sddev_init(int sd_port);
+int sddev_power_on(int sd_port);
+int sddev_power_off(int sd_port);
+int sddev_read_data(int sd_port, unsigned char *buff,unsigned long reg_addr,long num);
+int sddev_write_data(int sd_port, unsigned char *buff,unsigned long reg_addr,long num);
+unsigned int sddev_get_clockdiv(int sd_port, int clock);
+int sddev_set_port(int sd_port, int mode);
+int sddev_int_wait(int sd_port, int msec);
+int sddev_init_dma(int sd_port, unsigned long buffadr,unsigned long regadr,long cnt,int dir);
+int sddev_wait_dma_end(int sd_port, long cnt);
+int sddev_disable_dma(int sd_port);
+int sddev_finalize(int sd_port);
+int sddev_loc_cpu(int sd_port);
+int sddev_unl_cpu(int sd_port);
+int sddev_cmd0_sdio_mount(int sd_port);
+int sddev_cmd8_sdio_mount(int sd_port);
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* _SDDRV_H_ */
+
+/* End of File */
+