Heater for threaded program
Dependents: LEX_Threaded_Programming_V3
Heater.h
- Committer:
- justinbuckland
- Date:
- 2019-10-17
- Revision:
- 42:166d9bc7675e
- Parent:
- 35:5acf01897ed6
- Child:
- 45:5f588512529b
File content as of revision 42:166d9bc7675e:
/*------------------------------------------------------------------------------ Library header file for heater operations Date: 16/07/2018 ------------------------------------------------------------------------------*/ #ifndef Heater_H #define Heater_H #include "mbed.h" #include "ADS8568_ADC.h" #include "FastPWM.h" #include "memspcr.pb.h" class Heater { //This class provides the interface through which each heater can be controlled public: /** Constructor * @param thermal passes in all the control information needed for the heater * @param i_port is the ADC port relating to the current read * @param v_port is the ADC port relating to the voltage read * @param * drive is a pointer to the main heater * @param * guard is a pointer to the guard heater **/ Heater(const int i_port, const int v_port, float cal_a, float cal_b, FastPWM * drive, FastPWM * guard, ADS8568_ADC * adc, DigitalIn adc_busy, const memspcr_ThermalConfiguration & thermal = memspcr_ThermalConfiguration_init_zero); //Public member functions void read(); //Updates the resistance and error values for the heater void update(); //Holds R_ref for hold_time miliseconds void turn_on(); //Turns the heater on void turn_off(); //Turns the heater off //Getters and setters void Set_ref(float R); void Set_D(float D); float Get_D() const; int Get_i() const; int Get_v() const; float Get_R() const; float Get_R_avg(); float Get_R_ref() const; float Get_error() const; float Get_error_integrated() const; protected: const memspcr_ThermalConfiguration thermal; int curr; //Latest current reading from ADC int v; //Latest voltage reading from ADC float R; //Latest resistance calculated from ADC current and voltage float R_avg; //Average resitance since last log event float R_acc; //Accumulated sum of resistance vaules since last log event int n_acc; //Number of resistance measurements since last log event float R_ref; //Current referance for resistance float error; //R_ref - R float error_integrated; //Integrated error ADS8568_ADC * adc; DigitalIn adc_busy; int i_port; //ADC port which corresponds to current measurements int v_port; //ADC port which corresponds to voltage measurements float cal_a; float cal_b; //Resistance calibration ADC units to Ohms: R_Ohm = cal_a + cal_b * R_ADC FastPWM * drive; //Pointer to the driver FastPWM * guard; //Pointer to the guard }; #endif