Suraj Pal
Embed client working with Cell network.
Dependencies: C027Interface
Fork of
U_Blox_DeviceConnector
by 
Sarah Marsh
docs/radio_module_identify.md@64:bb80622ae5e6, 2017-02-02 (annotated)
- Committer:
- sarahmarshy
- Date:
- Thu Feb 02 21:19:33 2017 +0000
- Revision:
- 64:bb80622ae5e6
- Parent:
- 0:7d5ec759888b
Add C027 example;
Who changed what in which revision?
| User | Revision | Line number | New contents of line |
|---|---|---|---|
| Yogesh Pande |
0:7d5ec759888b | 1 | ## Radio module identification |
| Yogesh Pande |
0:7d5ec759888b | 2 | |
| Yogesh Pande |
0:7d5ec759888b | 3 | * Make sure that you are using the same radio modules on both server and client sides: |
| Yogesh Pande |
0:7d5ec759888b | 4 | |
| Yogesh Pande |
0:7d5ec759888b | 5 | * If the radio module on the gateway router supports the 2.4 GHz frequency band, the client side must have an mbed 6LoWPAN shield that uses a 2.4 GHz radio module (such as Atmel AT86RF233). |
| Yogesh Pande |
0:7d5ec759888b | 6 | |
| Yogesh Pande |
0:7d5ec759888b | 7 | * If the radio module on the gateway router supports the sub-GHz frequency band, the client side must have an mbed 6LoWPAN shield that uses a sub-GHz radio module (such as Atmel AT86RF212B). |
| Yogesh Pande |
0:7d5ec759888b | 8 | |
| Yogesh Pande |
0:7d5ec759888b | 9 | * An easy way to identify which frequency band your setup uses is to check the **Antenna size** on the radio module: |
| Yogesh Pande |
0:7d5ec759888b | 10 | |
| Yogesh Pande |
0:7d5ec759888b | 11 | * The sub-GHz band antenna is larger than the 2.4 GHz antenna. |
| Yogesh Pande |
0:7d5ec759888b | 12 | |
| Yogesh Pande |
0:7d5ec759888b | 13 | * For the client side (mbed 6LoWPAN shield connected to an FRDM-K64F board), see the image below: |
| Yogesh Pande |
0:7d5ec759888b | 14 |  |
| Yogesh Pande |
0:7d5ec759888b | 15 | |
| Yogesh Pande |
0:7d5ec759888b | 16 | * For the gateway router, see the image below: |
| Yogesh Pande |
0:7d5ec759888b | 17 |  |