NSDL C library
Dependents: NSDL_HelloWorld_WiFi UbloxModemNanoServiceClient IOT-NSDL_HelloWorld LWM2M_NanoService_Ethernet ... more
Fork of nsdl_lib by
Note that use of this software requires acceptance of the Sensinode EULA: http://mbed.org/teams/Sensinode/code/nsdl_lib/wiki/EULA
Diff: sn_coap_header.h
- Revision:
- 5:da1db64e7fb9
- Parent:
- 0:58c4f13c4b9a
- Child:
- 6:1caf76131c9a
--- a/sn_coap_header.h Wed Oct 09 09:20:29 2013 +0000
+++ b/sn_coap_header.h Mon Oct 14 11:00:30 2013 +0000
@@ -16,31 +16,33 @@
extern "C" {
#endif
-/* * * * * * * * * * * */
-/* * * * DEFINES * * * */
-/* * * * * * * * * * * */
-
/* * * * * * * * * * * * * * */
/* * * * ENUMERATIONS * * * */
/* * * * * * * * * * * * * * */
-/* Enumeration for CoAP Version */
+/**
+ * \brief Enumeration for CoAP Version
+ */
typedef enum coap_version_
{
COAP_VERSION_1 = 0x40,
COAP_VERSION_UNKNOWN = 0xFF
} coap_version_e;
-/* Enumeration for CoAP Message type, used in CoAP Header */
+/**
+ * \brief Enumeration for CoAP Message type, used in CoAP Header
+ */
typedef enum sn_coap_msg_type_
{
- COAP_MSG_TYPE_CONFIRMABLE = 0x00, /* User uses this for Reliable Request messages */
- COAP_MSG_TYPE_NON_CONFIRMABLE = 0x10, /* User uses this for Non-reliable Request and Response messages */
- COAP_MSG_TYPE_ACKNOWLEDGEMENT = 0x20, /* User uses this for Response to a Confirmable Request */
- COAP_MSG_TYPE_RESET = 0x30 /* User uses this to answer a Bad Request */
+ COAP_MSG_TYPE_CONFIRMABLE = 0x00, /**< Reliable Request messages */
+ COAP_MSG_TYPE_NON_CONFIRMABLE = 0x10, /**< Non-reliable Request and Response messages */
+ COAP_MSG_TYPE_ACKNOWLEDGEMENT = 0x20, /**< Response to a Confirmable Request */
+ COAP_MSG_TYPE_RESET = 0x30 /**< Answer a Bad Request */
} sn_coap_msg_type_e;
-/* Enumeration for CoAP Message code, used in CoAP Header */
+/**
+ * \brief Enumeration for CoAP Message code, used in CoAP Header
+ */
typedef enum sn_coap_msg_code_
{
COAP_MSG_CODE_EMPTY = 0,
@@ -61,7 +63,7 @@
COAP_MSG_CODE_RESPONSE_NOT_FOUND = 132,
COAP_MSG_CODE_RESPONSE_METHOD_NOT_ALLOWED = 133,
COAP_MSG_CODE_RESPONSE_NOT_ACCEPTABLE = 134,
- COAP_MSG_CODE_RESPONSE_REQUEST_ENTITY_INCOMPLETE = 136, /* Block */
+ COAP_MSG_CODE_RESPONSE_REQUEST_ENTITY_INCOMPLETE = 136,
COAP_MSG_CODE_RESPONSE_PRECONDITION_FAILED = 140,
COAP_MSG_CODE_RESPONSE_REQUEST_ENTITY_TOO_LARGE = 141,
COAP_MSG_CODE_RESPONSE_UNSUPPORTED_CONTENT_FORMAT = 143,
@@ -73,7 +75,9 @@
COAP_MSG_CODE_RESPONSE_PROXYING_NOT_SUPPORTED = 165
} sn_coap_msg_code_e;
-/* Enumeration for CoAP Option number, used in CoAP Header */
+/**
+ * \brief Enumeration for CoAP Option number, used in CoAP Header
+ */
typedef enum sn_coap_option_numbers_
{
COAP_OPTION_IF_MATCH = 1,
@@ -99,7 +103,9 @@
// 136 = (Reserved)
} sn_coap_option_numbers_e;
-/* Enumeration for CoAP Content Format codes */
+/**
+ * \brief Enumeration for CoAP Content Format codes
+ */
typedef enum sn_coap_content_format_
{
COAP_CT_NONE = -1,
@@ -111,18 +117,20 @@
COAP_CT_JSON = 50,
} sn_coap_content_format_e;
-/* Enumeration for CoAP status, used in CoAP Header */
+/**
+ * \brief Enumeration for CoAP status, used in CoAP Header
+ */
typedef enum sn_coap_status_
{
- COAP_STATUS_OK = 0, /* Default value is OK */
- COAP_STATUS_PARSER_ERROR_IN_HEADER = 1, /* CoAP will send Reset message to invalid message sender */
- COAP_STATUS_PARSER_DUPLICATED_MSG = 2, /* CoAP will send Acknowledgement message to duplicated message sender */
- COAP_STATUS_PARSER_BLOCKWISE_MSG_RECEIVING = 3, /* User will get whole message after all message blocks received.
- User must release messages with this status. */
- COAP_STATUS_PARSER_BLOCKWISE_ACK = 4, /* Acknowledgement for sent Blockwise message received */
- COAP_STATUS_PARSER_BLOCKWISE_MSG_REJECTED = 5, /* Blockwise message received but not supported by compiling switch */
- COAP_STATUS_PARSER_BLOCKWISE_MSG_RECEIVED = 6 /* Blockwise message fully received and returned to app. */
- /* User must take care of releasing whole payload of the blockwise messages */
+ COAP_STATUS_OK = 0, /**< Default value is OK */
+ COAP_STATUS_PARSER_ERROR_IN_HEADER = 1, /**< CoAP will send Reset message to invalid message sender */
+ COAP_STATUS_PARSER_DUPLICATED_MSG = 2, /**< CoAP will send Acknowledgement message to duplicated message sender */
+ COAP_STATUS_PARSER_BLOCKWISE_MSG_RECEIVING = 3, /**< User will get whole message after all message blocks received.
+ User must release messages with this status. */
+ COAP_STATUS_PARSER_BLOCKWISE_ACK = 4, /**< Acknowledgement for sent Blockwise message received */
+ COAP_STATUS_PARSER_BLOCKWISE_MSG_REJECTED = 5, /**< Blockwise message received but not supported by compiling switch */
+ COAP_STATUS_PARSER_BLOCKWISE_MSG_RECEIVED = 6 /**< Blockwise message fully received and returned to app.
+ User must take care of releasing whole payload of the blockwise messages */
} sn_coap_status_e;
@@ -130,67 +138,69 @@
/* * * * STRUCTURES * * * */
/* * * * * * * * * * * * * */
-/* Structure for CoAP Options */
+/**
+ * \brief Structure for CoAP Options
+ */
typedef struct sn_coap_options_list_
{
- /* If-Match */
- /* If-None-Match */
- /* Size */
- /* Proxy-Scheme */
+ uint8_t max_age_len; /**< 0-4 bytes. */
+ uint8_t *max_age_ptr; /**< Must be set to NULL if not used */
- uint8_t max_age_len; /* 0-4 bytes. */
- uint8_t *max_age_ptr; /* Must be set to NULL if not used */
+ uint16_t proxy_uri_len; /**< 1-1034 bytes. */
+ uint8_t *proxy_uri_ptr; /**< Must be set to NULL if not used */
- uint16_t proxy_uri_len; /* 1-1034 bytes. */
- uint8_t *proxy_uri_ptr; /* Must be set to NULL if not used */
+ uint8_t etag_len; /**< 1-8 bytes. Repeatable */
+ uint8_t *etag_ptr; /**< Must be set to NULL if not used */
- uint8_t etag_len; /* 1-8 bytes. Repeatable */
- uint8_t *etag_ptr; /* Must be set to NULL if not used */
+ uint16_t uri_host_len; /**< 1-255 bytes. */
+ uint8_t *uri_host_ptr; /**< Must be set to NULL if not used */
- uint16_t uri_host_len; /* 1-255 bytes. */
- uint8_t *uri_host_ptr; /* Must be set to NULL if not used */
+ uint16_t location_path_len; /**< 0-255 bytes. Repeatable */
+ uint8_t *location_path_ptr; /**< Must be set to NULL if not used */
- uint16_t location_path_len; /* 0-255 bytes. Repeatable */
- uint8_t *location_path_ptr; /* Must be set to NULL if not used */
+ uint8_t uri_port_len; /**< 0-2 bytes. */
+ uint8_t *uri_port_ptr; /**< Must be set to NULL if not used */
- uint8_t uri_port_len; /* 0-2 bytes. */
- uint8_t *uri_port_ptr; /* Must be set to NULL if not used */
-
- uint16_t location_query_len; /* 0-255 bytes. Repeatable */
- uint8_t *location_query_ptr; /* Must be set to NULL if not used */
+ uint16_t location_query_len; /**< 0-255 bytes. Repeatable */
+ uint8_t *location_query_ptr; /**< Must be set to NULL if not used */
uint8_t observe;
- uint8_t observe_len; /* 0-2 bytes. */
- uint8_t *observe_ptr; /* Must be set to NULL if not used */
+ uint8_t observe_len; /**< 0-2 bytes. */
+ uint8_t *observe_ptr; /**< Must be set to NULL if not used */
- uint8_t accept_len; /* 0-2 bytes. Repeatable */
- uint8_t *accept_ptr; /* Must be set to NULL if not used */
+ uint8_t accept_len; /**< 0-2 bytes. Repeatable */
+ uint8_t *accept_ptr; /**< Must be set to NULL if not used */
- uint16_t uri_query_len; /* 1-255 bytes. Repeatable */
- uint8_t *uri_query_ptr; /* Must be set to NULL if not used */
+ uint16_t uri_query_len; /**< 1-255 bytes. Repeatable */
+ uint8_t *uri_query_ptr; /**< Must be set to NULL if not used */
- uint8_t block1_len; /* 0-3 bytes. */
- uint8_t *block1_ptr; /* Not for User */
+ uint8_t block1_len; /**< 0-3 bytes. */
+ uint8_t *block1_ptr; /**< Not for User */
- uint8_t block2_len; /* 0-3 bytes. */
- uint8_t *block2_ptr; /* Not for User */
+ uint8_t block2_len; /**< 0-3 bytes. */
+ uint8_t *block2_ptr; /**< Not for User */
} sn_coap_options_list_s;
+
/* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! */
/* !!! Main CoAP message struct !!! */
/* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! */
+
+/**
+ * \brief Main CoAP message struct
+ */
typedef struct sn_coap_hdr_
{
- sn_coap_status_e coap_status; /* Used for telling to User special cases when parsing message */
+ sn_coap_status_e coap_status; /**< Used for telling to User special cases when parsing message */
/* * * * * * * * * * * */
/* * * * Header * * * */
/* * * * * * * * * * * */
- sn_coap_msg_type_e msg_type; /* Confirmable, Non-Confirmable, Acknowledgement or Reset */
- sn_coap_msg_code_e msg_code; /* Empty: 0; Requests: 1-31; Responses: 64-191 */
- uint16_t msg_id; /* Message ID. Parser sets parsed message ID, builder sets message ID of built coap message */
+ sn_coap_msg_type_e msg_type; /**< Confirmable, Non-Confirmable, Acknowledgement or Reset */
+ sn_coap_msg_code_e msg_code; /**< Empty: 0; Requests: 1-31; Responses: 64-191 */
+ uint16_t msg_id; /**< Message ID. Parser sets parsed message ID, builder sets message ID of built coap message */
/* * * * * * * * * * * */
/* * * * Options * * * */
@@ -198,38 +208,63 @@
/* Here are most often used Options */
- uint16_t uri_path_len; /* 0-255 bytes. Repeatable. */
- uint8_t *uri_path_ptr; /* Must be set to NULL if not used. E.g: temp1/temp2 */
+ uint16_t uri_path_len; /**< 0-255 bytes. Repeatable. */
+ uint8_t *uri_path_ptr; /**< Must be set to NULL if not used. E.g: temp1/temp2 */
- uint8_t token_len; /* 1-8 bytes. */
- uint8_t *token_ptr; /* Must be set to NULL if not used */
+ uint8_t token_len; /**< 1-8 bytes. */
+ uint8_t *token_ptr; /**< Must be set to NULL if not used */
- /* todo: COAP12 - content type ptr as a content_type_e */
- uint8_t content_type_len; /* 0-2 bytes. */
- uint8_t *content_type_ptr; /* Must be set to NULL if not used */
+ uint8_t content_type_len; /**< 0-2 bytes. */
+ uint8_t *content_type_ptr; /**< Must be set to NULL if not used */
/* Here are not so often used Options */
- sn_coap_options_list_s *options_list_ptr; /* Must be set to NULL if not used */
+ sn_coap_options_list_s *options_list_ptr; /**< Must be set to NULL if not used */
/* * * * * * * * * * * */
/* * * * Payload * * * */
/* * * * * * * * * * * */
- uint16_t payload_len; /* Must be set to zero if not used */
- uint8_t *payload_ptr; /* Must be set to NULL if not used */
+ uint16_t payload_len; /**< Must be set to zero if not used */
+ uint8_t *payload_ptr; /**< Must be set to NULL if not used */
} sn_coap_hdr_s;
/* * * * * * * * * * * * * * * * * * * * * * */
/* * * * EXTERNAL FUNCTION PROTOTYPES * * * */
/* * * * * * * * * * * * * * * * * * * * * * */
+/**
+ * \brief Sets the memory allocation and deallocation functions the library will use, and must be called first.
+ */
extern void sn_coap_builder_and_parser_init(void* (*used_malloc_func_ptr)(uint16_t), void (*used_free_func_ptr)(void*));
+
+/**
+ * \brief Parses an incoming message buffer to a CoAP header structure.
+ */
extern sn_coap_hdr_s *sn_coap_parser(uint16_t packet_data_len, uint8_t *packet_data_ptr, coap_version_e *coap_version_ptr);
+
+/**
+ * \brief Releases any memory allocated by a CoAP message structure.
+ */
+extern void sn_coap_parser_release_allocated_coap_msg_mem(sn_coap_hdr_s *freed_coap_msg_ptr);
+
+/**
+ * \brief Builds an outgoing message buffer from a CoAP header structure.
+ */
extern int16_t sn_coap_builder(uint8_t *dst_packet_data_ptr, sn_coap_hdr_s *src_coap_msg_ptr);
+
+/**
+ * \brief Calculates the needed message buffer size from a CoAP message structure.
+ */
extern uint16_t sn_coap_builder_calc_needed_packet_data_size(sn_coap_hdr_s *src_coap_msg_ptr);
-extern void sn_coap_builder_release_allocated_send_msg_mem(sn_nsdl_transmit_s *freed_send_msg_ptr);
+
+/**
+ * \brief Automates the building of a response to an incoming request.
+ */
extern sn_coap_hdr_s *sn_coap_build_response(sn_coap_hdr_s *coap_packet_ptr, uint8_t msg_code);
-extern void sn_coap_parser_release_allocated_coap_msg_mem(sn_coap_hdr_s *freed_coap_msg_ptr);
+
+/**
+ * \brief CoAP packet debugging.
+ */
extern void sn_coap_packet_debug(sn_coap_hdr_s *coap_packet_ptr);
#endif /* SN_COAP_HEADER_H_ */
