Driver for the SX1280 RF Transceiver
Dependents: SX1280PingPong RangignMaster RangingSlave MSNV2-Terminal_V1-6 ... more
Diff: sx1280.h
- Revision:
- 11:d60df50e108f
- Parent:
- 10:c1b368a5052f
- Child:
- 12:c4f110f3fe3e
diff -r c1b368a5052f -r d60df50e108f sx1280.h --- a/sx1280.h Mon Oct 09 11:59:51 2017 +0000 +++ b/sx1280.h Wed Jul 18 08:48:34 2018 +0000 @@ -190,6 +190,11 @@ #define BLE_ADVERTIZER_ACCESS_ADDRESS 0x8E89BED6 /*! + * \brief Select high sensitivity versus power consumption + */ +#define REG_HIGH_SENSITIVITY 0x0891 + +/*! * \brief Represents the states of the radio */ typedef enum @@ -546,11 +551,10 @@ */ typedef enum { - BLE_MASTER_SLAVE = 0x00, - BLE_ADVERTISER = 0x20, + BLE_PAYLOAD_LENGTH_MAX_31_BYTES = 0x00, + BLE_PAYLOAD_LENGTH_MAX_37_BYTES = 0x20, BLE_TX_TEST_MODE = 0x40, - BLE_RX_TEST_MODE = 0x60, - BLE_RXTX_TEST_MODE = 0x80, + BLE_PAYLOAD_LENGTH_MAX_255_BYTES = 0x80, }RadioBleConnectionStates_t; /*! @@ -635,47 +639,13 @@ }RadioRangingRoles_t; /*! - * \brief Represents all possible opcode understood by the radio + * \brief Represents the possible Mask settings for sensitivity selection */ -typedef enum RadioCommands_u +typedef enum { - RADIO_GET_STATUS = 0xC0, - RADIO_WRITE_REGISTER = 0x18, - RADIO_READ_REGISTER = 0x19, - RADIO_WRITE_BUFFER = 0x1A, - RADIO_READ_BUFFER = 0x1B, - RADIO_SET_SLEEP = 0x84, - RADIO_SET_STANDBY = 0x80, - RADIO_SET_FS = 0xC1, - RADIO_SET_TX = 0x83, - RADIO_SET_RX = 0x82, - RADIO_SET_RXDUTYCYCLE = 0x94, - RADIO_SET_CAD = 0xC5, - RADIO_SET_TXCONTINUOUSWAVE = 0xD1, - RADIO_SET_TXCONTINUOUSPREAMBLE = 0xD2, - RADIO_SET_PACKETTYPE = 0x8A, - RADIO_GET_PACKETTYPE = 0x03, - RADIO_SET_RFFREQUENCY = 0x86, - RADIO_SET_TXPARAMS = 0x8E, - RADIO_SET_CADPARAMS = 0x88, - RADIO_SET_BUFFERBASEADDRESS = 0x8F, - RADIO_SET_MODULATIONPARAMS = 0x8B, - RADIO_SET_PACKETPARAMS = 0x8C, - RADIO_GET_RXBUFFERSTATUS = 0x17, - RADIO_GET_PACKETSTATUS = 0x1D, - RADIO_GET_RSSIINST = 0x1F, - RADIO_SET_DIOIRQPARAMS = 0x8D, - RADIO_GET_IRQSTATUS = 0x15, - RADIO_CLR_IRQSTATUS = 0x97, - RADIO_CALIBRATE = 0x89, - RADIO_SET_REGULATORMODE = 0x96, - RADIO_SET_SAVECONTEXT = 0xD5, - RADIO_SET_AUTOTX = 0x98, - RADIO_SET_AUTOFS = 0x9E, - RADIO_SET_LONGPREAMBLE = 0x9B, - RADIO_SET_UARTSPEED = 0x9D, - RADIO_SET_RANGING_ROLE = 0xA3, -}RadioCommands_t; + LNA_LOW_POWER_MASK = 0x00, + LNA_HIGH_SENSITIVITY_MASK = 0xC0, +}RadioLnaSettings_t; /*! * \brief Represents an amount of time measurable by the radio clock @@ -1369,7 +1339,11 @@ void GetRxBufferStatus( uint8_t *rxPayloadLength, uint8_t *rxStartBufferPointer ); /*! - * \brief Gets the last received packet payload length + * \brief Gets the last received packet status + * + * The packet status structure returned depends on the modem type selected + * + * \see PacketStatus_t for the description of availabled informations * * \param [out] packetStatus A structure of packet status */ @@ -1435,6 +1409,12 @@ void SetAutoTx( uint16_t time ); /*! + * \brief Stop the chip to automatically send a packet after the end of a packet reception + * if previously activated with SX1280::SetAutoTx command + */ + void StopAutoTx( void ); + + /*! * \brief Sets the chip to stay in FS mode after sending a packet * * \param [in] enableAutoFs Turn on auto FS