Seeed
To get started with Seeed Tiny BLE, include detecting motion, button and battery level.
Dependencies: BLE_API eMPL_MPU6050 mbed nRF51822
Diff: nRF51822/nordic-sdk/components/softdevice/s110/headers/ble_gatts.h
- Revision:
- 3:24e365bd1b97
- Parent:
- 2:b61ddbb8528e
--- a/nRF51822/nordic-sdk/components/softdevice/s110/headers/ble_gatts.h Thu Nov 05 02:46:37 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,566 +0,0 @@
-/* Copyright (c) 2011 Nordic Semiconductor. All Rights Reserved.
- *
- * The information contained herein is confidential property of Nordic Semiconductor. The use,
- * copying, transfer or disclosure of such information is prohibited except by express written
- * agreement with Nordic Semiconductor.
- *
- */
-/**
- @addtogroup BLE_GATTS Generic Attribute Profile (GATT) Server
- @{
- @brief Definitions and prototypes for the GATTS interface.
- */
-
-#ifndef BLE_GATTS_H__
-#define BLE_GATTS_H__
-
-#include "ble_types.h"
-#include "ble_ranges.h"
-#include "ble_l2cap.h"
-#include "ble_gap.h"
-#include "ble_gatt.h"
-#include "nrf_svc.h"
-
-/** @addtogroup BLE_GATTS_ENUMERATIONS Enumerations
- * @{ */
-
-/**
- * @brief GATTS API SVC numbers.
- */
-enum BLE_GATTS_SVCS
-{
- SD_BLE_GATTS_SERVICE_ADD = BLE_GATTS_SVC_BASE, /**< Add a service. */
- SD_BLE_GATTS_INCLUDE_ADD, /**< Add an included service. */
- SD_BLE_GATTS_CHARACTERISTIC_ADD, /**< Add a characteristic. */
- SD_BLE_GATTS_DESCRIPTOR_ADD, /**< Add a generic attribute. */
- SD_BLE_GATTS_VALUE_SET, /**< Set an attribute value. */
- SD_BLE_GATTS_VALUE_GET, /**< Get an attribute value. */
- SD_BLE_GATTS_HVX, /**< Handle Value Notification or Indication. */
- SD_BLE_GATTS_SERVICE_CHANGED, /**< Perform a Service Changed Indication to one or more peers. */
- SD_BLE_GATTS_RW_AUTHORIZE_REPLY, /**< Reply to an authorization request for a read or write operation on one or more attributes. */
- SD_BLE_GATTS_SYS_ATTR_SET, /**< Set the persistent system attributes for a connection. */
- SD_BLE_GATTS_SYS_ATTR_GET, /**< Get updated persistent system attributes after terminating a connection. */
-};
-
-/** @} */
-
-/** @addtogroup BLE_GATTS_DEFINES Defines
- * @{ */
-
-/** @brief Only the default MTU size of 23 is currently supported. */
-#define GATT_RX_MTU 23
-
-/** @defgroup BLE_ERRORS_GATTS SVC return values specific to GATTS
- * @{ */
-#define BLE_ERROR_GATTS_INVALID_ATTR_TYPE (NRF_GATTS_ERR_BASE + 0x000) /**< Invalid attribute type. */
-#define BLE_ERROR_GATTS_SYS_ATTR_MISSING (NRF_GATTS_ERR_BASE + 0x001) /**< System Attributes missing. */
-/** @} */
-
-/** @defgroup BLE_GATTS_ATTR_LENS_MAX Maximum attribute lengths
- * @{ */
-#define BLE_GATTS_FIX_ATTR_LEN_MAX (510) /**< Maximum length for fixed length Attribute Values. */
-#define BLE_GATTS_VAR_ATTR_LEN_MAX (512) /**< Maximum length for variable length Attribute Values. */
-/** @} */
-
-/** @defgroup BLE_GATTS_SRVC_TYPES GATT Server Service Types
- * @{ */
-#define BLE_GATTS_SRVC_TYPE_INVALID 0x00 /**< Invalid Service Type. */
-#define BLE_GATTS_SRVC_TYPE_PRIMARY 0x01 /**< Primary Service. */
-#define BLE_GATTS_SRVC_TYPE_SECONDARY 0x02 /**< Secondary Type. */
-/** @} */
-
-
-/** @defgroup BLE_GATTS_ATTR_TYPES GATT Server Attribute Types
- * @{ */
-#define BLE_GATTS_ATTR_TYPE_INVALID 0x00 /**< Invalid Attribute Type. */
-#define BLE_GATTS_ATTR_TYPE_PRIM_SRVC_DECL 0x01 /**< Primary Service Declaration. */
-#define BLE_GATTS_ATTR_TYPE_SEC_SRVC_DECL 0x02 /**< Secondary Service Declaration. */
-#define BLE_GATTS_ATTR_TYPE_INC_DECL 0x03 /**< Include Declaration. */
-#define BLE_GATTS_ATTR_TYPE_CHAR_DECL 0x04 /**< Characteristic Declaration. */
-#define BLE_GATTS_ATTR_TYPE_CHAR_VAL 0x05 /**< Characteristic Value. */
-#define BLE_GATTS_ATTR_TYPE_DESC 0x06 /**< Descriptor. */
-#define BLE_GATTS_ATTR_TYPE_OTHER 0x07 /**< Other, non-GATT specific type. */
-/** @} */
-
-
-/** @defgroup BLE_GATTS_OPS GATT Server Operations
- * @{ */
-#define BLE_GATTS_OP_INVALID 0x00 /**< Invalid Operation. */
-#define BLE_GATTS_OP_WRITE_REQ 0x01 /**< Write Request. */
-#define BLE_GATTS_OP_WRITE_CMD 0x02 /**< Write Command. */
-#define BLE_GATTS_OP_SIGN_WRITE_CMD 0x03 /**< Signed Write Command. */
-#define BLE_GATTS_OP_PREP_WRITE_REQ 0x04 /**< Prepare Write Request. */
-#define BLE_GATTS_OP_EXEC_WRITE_REQ_CANCEL 0x05 /**< Execute Write Request: Cancel all prepared writes. */
-#define BLE_GATTS_OP_EXEC_WRITE_REQ_NOW 0x06 /**< Execute Write Request: Immediately execute all prepared writes. */
-/** @} */
-
-/** @defgroup BLE_GATTS_VLOCS GATT Value Locations
- * @{ */
-#define BLE_GATTS_VLOC_INVALID 0x00 /**< Invalid Location. */
-#define BLE_GATTS_VLOC_STACK 0x01 /**< Attribute Value is located in stack memory, no user memory is required. */
-#define BLE_GATTS_VLOC_USER 0x02 /**< Attribute Value is located in user memory. This requires the user to maintain a valid buffer through the lifetime of the attribute, since the stack
- will read and write directly to the memory using the pointer provided in the APIs. There are no alignment requirements for the buffer. */
-/** @} */
-
-/** @defgroup BLE_GATTS_AUTHORIZE_TYPES GATT Server Authorization Types
- * @{ */
-#define BLE_GATTS_AUTHORIZE_TYPE_INVALID 0x00 /**< Invalid Type. */
-#define BLE_GATTS_AUTHORIZE_TYPE_READ 0x01 /**< Authorize a Read Operation. */
-#define BLE_GATTS_AUTHORIZE_TYPE_WRITE 0x02 /**< Authorize a Write Request Operation. */
-/** @} */
-
-
-/** @} */
-
-/** @addtogroup BLE_GATTS_STRUCTURES Structures
- * @{ */
-
-/**
- * @brief BLE GATTS init options
- */
-typedef struct
-{
- uint8_t service_changed:1; /**< Include the Service Changed characteristic in the local attributes. */
-} ble_gatts_enable_params_t;
-
-/**@brief Attribute metadata. */
-typedef struct
-{
- ble_gap_conn_sec_mode_t read_perm; /**< Read permissions. */
- ble_gap_conn_sec_mode_t write_perm; /**< Write permissions. */
- uint8_t vlen :1; /**< Variable length attribute. */
- uint8_t vloc :2; /**< Value location, see @ref BLE_GATTS_VLOCS.*/
- uint8_t rd_auth :1; /**< Read Authorization and value will be requested from the application on every read operation. */
- uint8_t wr_auth :1; /**< Write Authorization will be requested from the application on every Write Request operation (but not Write Command). */
-} ble_gatts_attr_md_t;
-
-
-/**@brief GATT Attribute. */
-typedef struct
-{
- ble_uuid_t* p_uuid; /**< Pointer to the attribute UUID. */
- ble_gatts_attr_md_t* p_attr_md; /**< Pointer to the attribute metadata structure. */
- uint16_t init_len; /**< Initial attribute value length in bytes. */
- uint16_t init_offs; /**< Initial attribute value offset in bytes. If different from zero, the first init_offs bytes of the attribute value will be left uninitialized. */
- uint16_t max_len; /**< Maximum attribute value length in bytes, see @ref BLE_GATTS_ATTR_LENS_MAX for maximum values. */
- uint8_t* p_value; /**< Pointer to the attribute data. Please note that if the @ref BLE_GATTS_VLOC_USER value location is selected in the attribute metadata, this will have to point to a buffer
- that remains valid through the lifetime of the attribute. This excludes usage of automatic variables that may go out of scope or any other temporary location.
- The stack may access that memory directly without the application's knowledge. */
-} ble_gatts_attr_t;
-
-
-/**@brief GATT Attribute Context. */
-typedef struct
-{
- ble_uuid_t srvc_uuid; /**< Service UUID. */
- ble_uuid_t char_uuid; /**< Characteristic UUID if applicable (BLE_UUID_TYPE_UNKNOWN if N/A). */
- ble_uuid_t desc_uuid; /**< Descriptor UUID if applicable (BLE_UUID_TYPE_UNKNOWN if N/A). */
- uint16_t srvc_handle; /**< Service Handle. */
- uint16_t value_handle; /**< Characteristic Handle if applicable (BLE_GATT_HANDLE_INVALID if N/A). */
- uint8_t type; /**< Attribute Type, see @ref BLE_GATTS_ATTR_TYPES. */
-} ble_gatts_attr_context_t;
-
-
-/**@brief GATT Characteristic Presentation Format. */
-typedef struct
-{
- uint8_t format; /**< Format of the value, see @ref BLE_GATT_CPF_FORMATS. */
- int8_t exponent; /**< Exponent for integer data types. */
- uint16_t unit; /**< UUID from Bluetooth Assigned Numbers. */
- uint8_t name_space; /**< Namespace from Bluetooth Assigned Numbers, see @ref BLE_GATT_CPF_NAMESPACES. */
- uint16_t desc; /**< Namespace description from Bluetooth Assigned Numbers, see @ref BLE_GATT_CPF_NAMESPACES. */
-} ble_gatts_char_pf_t;
-
-
-/**@brief GATT Characteristic metadata. */
-typedef struct
-{
- ble_gatt_char_props_t char_props; /**< Characteristic Properties. */
- ble_gatt_char_ext_props_t char_ext_props; /**< Characteristic Extended Properties. */
- uint8_t* p_char_user_desc; /**< Pointer to a UTF-8, NULL if the descriptor is not required. */
- uint16_t char_user_desc_max_size; /**< The maximum size in bytes of the user description descriptor. */
- uint16_t char_user_desc_size; /**< The size of the user description, must be smaller or equal to char_user_desc_max_size. */
- ble_gatts_char_pf_t* p_char_pf; /**< Pointer to a presentation format structure or NULL if the descriptor is not required. */
- ble_gatts_attr_md_t* p_user_desc_md; /**< Attribute metadata for the User Description descriptor, or NULL for default values. */
- ble_gatts_attr_md_t* p_cccd_md; /**< Attribute metadata for the Client Characteristic Configuration Descriptor, or NULL for default values. */
- ble_gatts_attr_md_t* p_sccd_md; /**< Attribute metadata for the Server Characteristic Configuration Descriptor, or NULL for default values. */
-} ble_gatts_char_md_t;
-
-
-/**@brief GATT Characteristic Definition Handles. */
-typedef struct
-{
- uint16_t value_handle; /**< Handle to the characteristic value. */
- uint16_t user_desc_handle; /**< Handle to the User Description descriptor, or BLE_GATT_HANDLE_INVALID if not present. */
- uint16_t cccd_handle; /**< Handle to the Client Characteristic Configuration Descriptor, or BLE_GATT_HANDLE_INVALID if not present. */
- uint16_t sccd_handle; /**< Handle to the Server Characteristic Configuration Descriptor, or BLE_GATT_HANDLE_INVALID if not present. */
-} ble_gatts_char_handles_t;
-
-
-/**@brief GATT HVx parameters. */
-typedef struct
-{
- uint16_t handle; /**< Characteristic Value Handle. */
- uint8_t type; /**< Indication or Notification, see @ref BLE_GATT_HVX_TYPES. */
- uint16_t offset; /**< Offset within the attribute value. */
- uint16_t* p_len; /**< Length in bytes to be written, length in bytes written after successful return. */
- uint8_t* p_data; /**< Actual data content, use NULL to use the current attribute value. */
-} ble_gatts_hvx_params_t;
-
-/**@brief GATT Read Authorization parameters. */
-typedef struct
-{
- uint16_t gatt_status; /**< GATT status code for the operation, see @ref BLE_GATT_STATUS_CODES. */
- uint8_t update : 1; /**< If set, data supplied in p_data will be used in the ATT response. */
- uint16_t offset; /**< Offset of the attribute value being updated. */
- uint16_t len; /**< Length in bytes of the value in p_data pointer, see @ref BLE_GATTS_ATTR_LENS_MAX. */
- uint8_t* p_data; /**< Pointer to new value used to update the attribute value. */
-} ble_gatts_read_authorize_params_t;
-
-/**@brief GATT Write Authorisation parameters. */
-typedef struct
-{
- uint16_t gatt_status; /**< GATT status code for the operation, see @ref BLE_GATT_STATUS_CODES. */
-} ble_gatts_write_authorize_params_t;
-
-/**@brief GATT Read or Write Authorize Reply parameters. */
-typedef struct
-{
- uint8_t type; /**< Type of authorize operation, see @ref BLE_GATTS_AUTHORIZE_TYPES. */
- union {
- ble_gatts_read_authorize_params_t read; /**< Read authorization parameters. */
- ble_gatts_write_authorize_params_t write; /**< Write authorization parameters. */
- } params;
-} ble_gatts_rw_authorize_reply_params_t;
-
-
-/**
- * @brief GATT Server Event IDs.
- */
-enum BLE_GATTS_EVTS
-{
- BLE_GATTS_EVT_WRITE = BLE_GATTS_EVT_BASE, /**< Write operation performed. */
- BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST, /**< Read/Write Authorization request. */
- BLE_GATTS_EVT_SYS_ATTR_MISSING, /**< A persistent system attribute access is pending, awaiting a sd_ble_gatts_sys_attr_set(). */
- BLE_GATTS_EVT_HVC, /**< Handle Value Confirmation. */
- BLE_GATTS_EVT_SC_CONFIRM, /**< Service Changed Confirmation. */
- BLE_GATTS_EVT_TIMEOUT /**< Timeout. */
-};
-
-
-/**@brief Event structure for BLE_GATTS_EVT_WRITE. */
-typedef struct
-{
- uint16_t handle; /**< Attribute Handle. */
- uint8_t op; /**< Type of write operation, see @ref BLE_GATTS_OPS. */
- ble_gatts_attr_context_t context; /**< Attribute Context. */
- uint16_t offset; /**< Offset for the write operation. */
- uint16_t len; /**< Length of the incoming data. */
- uint8_t data[1]; /**< Incoming data, variable length. */
-} ble_gatts_evt_write_t;
-
-/**@brief Event structure for authorize read request. */
-typedef struct
-{
- uint16_t handle; /**< Attribute Handle. */
- ble_gatts_attr_context_t context; /**< Attribute Context. */
- uint16_t offset; /**< Offset for the read operation. */
-} ble_gatts_evt_read_t;
-
-/**@brief Event structure for BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST. */
-typedef struct
-{
- uint8_t type; /**< Type of authorize operation, see @ref BLE_GATTS_AUTHORIZE_TYPES. */
- union {
- ble_gatts_evt_read_t read; /**< Attribute Read Parameters. */
- ble_gatts_evt_write_t write; /**< Attribute Write Parameters. */
- } request;
-} ble_gatts_evt_rw_authorize_request_t;
-
-/**@brief Event structure for BLE_GATTS_EVT_SYS_ATTR_MISSING. */
-typedef struct
-{
- uint8_t hint;
-} ble_gatts_evt_sys_attr_missing_t;
-
-
-/**@brief Event structure for BLE_GATTS_EVT_HVC. */
-typedef struct
-{
- uint16_t handle; /**< Attribute Handle. */
-} ble_gatts_evt_hvc_t;
-
-/**@brief Event structure for BLE_GATTS_EVT_TIMEOUT. */
-typedef struct
-{
- uint8_t src; /**< Timeout source, see @ref BLE_GATT_TIMEOUT_SOURCES. */
-} ble_gatts_evt_timeout_t;
-
-
-/**@brief GATT Server event callback event structure. */
-typedef struct
-{
- uint16_t conn_handle; /**< Connection Handle on which event occurred. */
- union
- {
- ble_gatts_evt_write_t write; /**< Write Event Parameters. */
- ble_gatts_evt_rw_authorize_request_t authorize_request; /**< Read or Write Authorize Request Parameters. */
- ble_gatts_evt_sys_attr_missing_t sys_attr_missing; /**< System attributes missing. */
- ble_gatts_evt_hvc_t hvc; /**< Handle Value Confirmation Event Parameters. */
- ble_gatts_evt_timeout_t timeout; /**< Timeout Event. */
- } params;
-} ble_gatts_evt_t;
-
-/** @} */
-
-/** @addtogroup BLE_GATTS_FUNCTIONS Functions
- * @{ */
-
-/**@brief Add a service declaration to the local server ATT table.
- *
- * @param[in] type Toggles between primary and secondary services, see @ref BLE_GATTS_SRVC_TYPES.
- * @param[in] p_uuid Pointer to service UUID.
- * @param[out] p_handle Pointer to a 16-bit word where the assigned handle will be stored.
- *
- * @note Secondary Services are only relevant in the context of the entity that references them, it is therefore forbidden to
- * add a secondary service declaration that is not referenced by another service later in the ATT table.
- *
- * @return @ref NRF_SUCCESS Successfully added a service declaration.
- * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
- * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, Vendor Specific UUIDs need to be present in the table.
- * @return @ref NRF_ERROR_FORBIDDEN Forbidden value supplied, certain UUIDs are reserved for the stack.
- * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
- */
-SVCALL(SD_BLE_GATTS_SERVICE_ADD, uint32_t, sd_ble_gatts_service_add(uint8_t type, ble_uuid_t const*const p_uuid, uint16_t *const p_handle));
-
-
-/**@brief Add an include declaration to the local server ATT table.
- *
- * @note It is currently only possible to add an include declaration to the last added service (i.e. only sequential addition is supported at this time).
- *
- * @note The included service must already be present in the ATT table prior to this call.
- *
- * @param[in] service_handle Handle of the service where the included service is to be placed, if BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially.
- * @param[in] inc_srvc_handle Handle of the included service.
- * @param[out] p_include_handle Pointer to a 16-bit word where the assigned handle will be stored.
- *
- * @return @ref NRF_SUCCESS Successfully added an include declaration.
- * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
- * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, handle values need to match previously added services.
- * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation.
- * @return @ref NRF_ERROR_FORBIDDEN Forbidden value supplied, self inclusions are not allowed.
- * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
- * @return @ref NRF_ERROR_NOT_FOUND Attribute not found.
- */
-SVCALL(SD_BLE_GATTS_INCLUDE_ADD, uint32_t, sd_ble_gatts_include_add(uint16_t service_handle, uint16_t inc_srvc_handle, uint16_t *const p_include_handle));
-
-
-/**@brief Add a characteristic declaration, a characteristic value declaration and optional characteristic descriptor declarations to the local server ATT table.
- *
- * @note It is currently only possible to add a characteristic to the last added service (i.e. only sequential addition is supported at this time).
- *
- * @note Several restrictions apply to the parameters, such as matching permissions between the user description descriptor and the writeable auxiliaries bits,
- * readable (no security) and writeable (selectable) CCCDs and SCCDs and valid presentation format values.
- *
- * @note If no metadata is provided for the optional descriptors, their permissions will be derived from the characteristic permissions.
- *
- * @param[in] service_handle Handle of the service where the characteristic is to be placed, if BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially.
- * @param[in] p_char_md Characteristic metadata.
- * @param[in] p_attr_char_value Pointer to the attribute structure corresponding to the characteristic value.
- * @param[out] p_handles Pointer to the structure where the assigned handles will be stored.
- *
- * @return @ref NRF_SUCCESS Successfully added a characteristic.
- * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
- * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, service handle, Vendor Specific UUIDs, lengths, and permissions need to adhere to the constraints.
- * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation, a service context is required.
- * @return @ref NRF_ERROR_FORBIDDEN Forbidden value supplied, certain UUIDs are reserved for the stack.
- * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
- * @return @ref NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, attribute lengths are restricted by @ref BLE_GATTS_ATTR_LENS_MAX.
- */
-SVCALL(SD_BLE_GATTS_CHARACTERISTIC_ADD, uint32_t, sd_ble_gatts_characteristic_add(uint16_t service_handle, ble_gatts_char_md_t const*const p_char_md, ble_gatts_attr_t const*const p_attr_char_value, ble_gatts_char_handles_t *const p_handles));
-
-
-/**@brief Add a descriptor to the local server ATT table.
- *
- * @note It is currently only possible to add a descriptor to the last added characteristic (i.e. only sequential addition is supported at this time).
- *
- * @param[in] char_handle Handle of the characteristic where the descriptor is to be placed, if BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially.
- * @param[in] p_attr Pointer to the attribute structure.
- * @param[out] p_handle Pointer to a 16-bit word where the assigned handle will be stored.
- *
- * @return @ref NRF_SUCCESS Successfully added a descriptor.
- * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
- * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, characteristic handle, Vendor Specific UUIDs, lengths, and permissions need to adhere to the constraints.
- * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation, a characteristic context is required.
- * @return @ref NRF_ERROR_FORBIDDEN Forbidden value supplied, certain UUIDs are reserved for the stack.
- * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
- * @return @ref NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, attribute lengths are restricted by @ref BLE_GATTS_ATTR_LENS_MAX.
- */
-SVCALL(SD_BLE_GATTS_DESCRIPTOR_ADD, uint32_t, sd_ble_gatts_descriptor_add(uint16_t char_handle, ble_gatts_attr_t const * const p_attr, uint16_t* const p_handle));
-
-/**@brief Set the value of a given attribute.
- *
- * @param[in] handle Attribute handle.
- * @param[in] offset Offset in bytes to write from.
- * @param[in,out] p_len Length in bytes to be written, length in bytes written after successful return.
- * @param[in] p_value Pointer to a buffer (at least len bytes long) containing the desired attribute value. If value is stored in user memory, only the attribute length is updated when p_value == NULL.
- *
- * @return @ref NRF_SUCCESS Successfully set the value of the attribute.
- * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
- * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
- * @return @ref NRF_ERROR_NOT_FOUND Attribute not found.
- * @return @ref NRF_ERROR_FORBIDDEN Forbidden handle supplied, certain attributes are not modifiable by the application.
- * @return @ref NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, attribute lengths are restricted by @ref BLE_GATTS_ATTR_LENS_MAX.
- */
-SVCALL(SD_BLE_GATTS_VALUE_SET, uint32_t, sd_ble_gatts_value_set(uint16_t handle, uint16_t offset, uint16_t* const p_len, uint8_t const * const p_value));
-
-/**@brief Get the value of a given attribute.
- *
- * @param[in] handle Attribute handle.
- * @param[in] offset Offset in bytes to read from.
- * @param[in,out] p_len Length in bytes to be read, total length of attribute value (in bytes, starting from offset) after successful return.
- * @param[in,out] p_data Pointer to a buffer (at least len bytes long) where to store the attribute value. Set to NULL to obtain the complete length of attribute value.
- *
- * @note If the attribute value is longer than the size of the supplied buffer,
- * p_len will return the total attribute value length (excluding offset),
- * and not the number of bytes actually returned in p_data.
- * The application may use this information to allocate a suitable buffer size.
- *
- * @return @ref NRF_SUCCESS Successfully retrieved the value of the attribute.
- * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
- * @return @ref NRF_ERROR_NOT_FOUND Attribute not found.
- */
-SVCALL(SD_BLE_GATTS_VALUE_GET, uint32_t, sd_ble_gatts_value_get(uint16_t handle, uint16_t offset, uint16_t *const p_len, uint8_t* const p_data));
-
-/**@brief Notify or Indicate an attribute value.
- *
- * @details This function checks for the relevant Client Characteristic Configuration descriptor value to verify that the relevant operation
- * (notification or indication) has been enabled by the client. It is also able to update the attribute value before issuing the PDU, so that
- * the application can atomically perform a value update and a server initiated transaction with a single API call.
- * If the application chooses to indicate an attribute value, a @ref BLE_GATTS_EVT_HVC will be sent up as soon as the confirmation arrives from
- * the peer.
- *
- * @note The local attribute value may be updated even if an outgoing packet is not sent to the peer due to an error during execution.
- * When receiveing the error codes @ref NRF_ERROR_INVALID_STATE, @ref NRF_ERROR_BUSY, @ref BLE_ERROR_GATTS_SYS_ATTR_MISSING and
- * @ref BLE_ERROR_NO_TX_BUFFERS the ATT table has been updated.
- * The caller can check whether the value has been updated by looking at the contents of *(p_hvx_params->p_len).
- *
- * @note It is important to note that a notification will <b>consume an application buffer</b>, and will therefore
- * generate a @ref BLE_EVT_TX_COMPLETE event when the packet has been transmitted. An indication on the other hand will use the
- * standard server internal buffer and thus will only generate a @ref BLE_GATTS_EVT_HVC event as soon as the confirmation
- * has been received from the peer. Please see the documentation of @ref sd_ble_tx_buffer_count_get for more details.
- *
- * @param[in] conn_handle Connection handle.
- * @param[in] p_hvx_params Pointer to an HVx parameters structure. If the p_data member contains a non-NULL pointer the attribute value will be updated with
- * the contents pointed by it before sending the notification or indication.
- *
- * @return @ref NRF_SUCCESS Successfully queued a notification or indication for transmission, and optionally updated the attribute value.
- * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
- * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
- * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
- * @return @ref BLE_ERROR_INVALID_ATTR_HANDLE Invalid attribute handle(s) supplied. Only attributes added directly by the application are available to notify and indicate.
- * @return @ref BLE_ERROR_GATTS_INVALID_ATTR_TYPE Invalid attribute type(s) supplied, only characteristic values may be notified and indicated.
- * @return @ref NRF_ERROR_NOT_FOUND Attribute not found.
- * @return @ref NRF_ERROR_DATA_SIZE Invalid data size(s) supplied.
- * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation, notifications or indications must be enabled in the CCCD.
- * @return @ref NRF_ERROR_BUSY Procedure already in progress.
- * @return @ref BLE_ERROR_GATTS_SYS_ATTR_MISSING System attributes missing, use @ref sd_ble_gatts_sys_attr_set to set them to a known value.
- * @return @ref BLE_ERROR_NO_TX_BUFFERS There are no available buffers to send the data, applies only to notifications.
- */
-SVCALL(SD_BLE_GATTS_HVX, uint32_t, sd_ble_gatts_hvx(uint16_t conn_handle, ble_gatts_hvx_params_t const*const p_hvx_params));
-
-/**@brief Indicate the Service Changed attribute value.
- *
- * @details This call will send a Handle Value Indication to one or more peers connected to inform them that the attribute
- * table layout has changed. As soon as the peer has confirmed the indication, a @ref BLE_GATTS_EVT_SC_CONFIRM event will
- * be issued.
- *
- * @note Some of the restrictions and limitations that apply to @ref sd_ble_gatts_hvx also apply here.
- *
- * @param[in] conn_handle Connection handle.
- * @param[in] start_handle Start of affected attribute handle range.
- * @param[in] end_handle End of affected attribute handle range.
- *
- * @return @ref NRF_SUCCESS Successfully queued the Service Changed indication for transmission.
- * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
- * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
- * @return @ref BLE_ERROR_INVALID_ATTR_HANDLE Invalid attribute handle(s) supplied, handles must be in the range populated by the application.
- * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation, notifications or indications must be enabled in the CCCD.
- * @return @ref NRF_ERROR_BUSY Procedure already in progress.
- * @return @ref BLE_ERROR_GATTS_SYS_ATTR_MISSING System attributes missing, use @ref sd_ble_gatts_sys_attr_set to set them to a known value.
- */
-SVCALL(SD_BLE_GATTS_SERVICE_CHANGED, uint32_t, sd_ble_gatts_service_changed(uint16_t conn_handle, uint16_t start_handle, uint16_t end_handle));
-
-/**@brief Respond to a Read/Write authorization request.
- *
- * @note This call should only be used as a response to a @ref BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST event issued to the application.
- *
- * @param[in] conn_handle Connection handle.
- * @param[in] p_rw_authorize_reply_params Pointer to a structure with the attribute provided by the application.
- *
- * @return @ref NRF_SUCCESS Successfully queued a response to the peer, and in the case of a write operation, ATT table updated.
- * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
- * @return @ref NRF_ERROR_INVALID_STATE No authorization request pending.
- * @return @ref NRF_ERROR_INVALID_PARAM Authorization op invalid,
- * or for Read Authorization reply: requested handles not replied with,
- * or for Write Authorization reply: handle supplied does not match requested handle.
- */
-SVCALL(SD_BLE_GATTS_RW_AUTHORIZE_REPLY, uint32_t, sd_ble_gatts_rw_authorize_reply(uint16_t conn_handle, ble_gatts_rw_authorize_reply_params_t const*const p_rw_authorize_reply_params));
-
-
-/**@brief Update persistent system attribute information.
- *
- * @details Supply to the stack information about persistent system attributes.
- * This call is legal in the connected state only, and is usually
- * made immediately after a connection is established and the bond identified.
- * usually as a response to a BLE_GATTS_EVT_SYS_ATTR_MISSING.
- *
- * p_sysattrs may point directly to the application's stored copy of the struct.
- * If the pointer is NULL, the system attribute info is initialized, assuming that
- * the application does not have any previously saved data for this bond.
- *
- * @note The state of persistent system attributes is reset upon connection and then remembered for its duration.
- *
- * @note If this call returns with an error code different from @ref NRF_SUCCESS, the storage of persistent system attributes may have been completed only partially.
- * This means that the state of the attribute table is undefined, and the application should either provide a new set of attributes using this same call or
- * reset the SoftDevice to return to a known state.
- *
- * @param[in] conn_handle Connection handle.
- * @param[in] p_sys_attr_data Pointer to a saved copy of system attributes supplied to the stack, or NULL.
- * @param[in] len Size of data pointed by p_sys_attr_data, in octets.
- *
- * @return @ref NRF_SUCCESS Successfully set the system attribute information.
- * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
- * @return @ref NRF_ERROR_INVALID_DATA Invalid data supplied, the data should be exactly the same as retrieved with @ref sd_ble_gatts_sys_attr_get.
- * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
- */
-SVCALL(SD_BLE_GATTS_SYS_ATTR_SET, uint32_t, sd_ble_gatts_sys_attr_set(uint16_t conn_handle, uint8_t const*const p_sys_attr_data, uint16_t len));
-
-
-/**@brief Retrieve persistent system attribute information from the stack.
- *
- * @details This call is used to retrieve information about values to be stored perisistently by the application
- * after a connection has been terminated. When a new connection is made to the same bond, the values
- * should be restored using @ref sd_ble_gatts_sys_attr_set.
- * The data should be read before any new advertising is started, or any new connection established. The connection handle for
- * the previous now defunct connection will remain valid until a new one is created to allow this API call to refer to it.
- *
- * @param[in] conn_handle Connection handle of the recently terminated connection.
- * @param[in] p_sys_attr_data Pointer to a buffer where updated information about system attributes will be filled in. NULL can be provided to
- * obtain the length of the data
- * @param[in,out] p_len Size of application buffer if p_sys_attr_data is not NULL. Unconditially updated to actual length of system attribute data.
- *
- * @return @ref NRF_SUCCESS Successfully retrieved the system attribute information.
- * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
- * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
- * @return @ref NRF_ERROR_DATA_SIZE The system attribute information did not fit into the provided buffer.
- */
-SVCALL(SD_BLE_GATTS_SYS_ATTR_GET, uint32_t, sd_ble_gatts_sys_attr_get(uint16_t conn_handle, uint8_t * const p_sys_attr_data, uint16_t* const p_len));
-
-/** @} */
-
-#endif // BLE_GATTS_H__
-
-/**
- @}
-*/
\ No newline at end of file