ST / stm-spirit1-rf-driver

Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.

Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo

Currently supported boards:

Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:

  • Unmount resistor R4
  • Mount resistor R7

Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!

This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).

Files at this revision

API Documentation at this revision

Revision 56:f9d8d8bb503f, committed 2017-04-07

Comitter:
Wolfgang Betz
Date:
Fri Apr 07 10:12:00 2017 +0200
Parent:
55:2bfbf1d07c14
Child:
57:8cc871dc6cac
Commit message:
Minor change in `README.md`

Changed in this revision

README.md Show annotated file Show diff for this revision Revisions of this file 
--- a/README.md	Fri Mar 10 14:22:38 2017 +0100
+++ b/README.md	Fri Apr 07 10:12:00 2017 +0200
@@ -9,4 +9,4 @@
  
 Furthermore, on some Nucleo development boards (e.g. the [NUCLEO_F429ZI](https://developer.mbed.org/platforms/ST-Nucleo-F429ZI/)), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro `SPIRIT1_SPI_MOSI=PB_5` defined, while the development board typically requires some HW modification as e.g. described [here](https://github.com/ARMmbed/sal-nanostack-driver-stm32-eth)! 
 
-This driver is used with 6LoWPAN stack.
+This driver can be used together with the 6LoWPAN stack (*a.k.a.* Nanostack).