ST / stm-spirit1-rf-driver

Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.

Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo

Currently supported boards:

Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:

  • Unmount resistor R4
  • Mount resistor R7

Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!

This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).

Files at this revision

API Documentation at this revision

Revision 35:f3f444c379d0, committed 2016-11-22

Comitter:
Wolfgang Betz
Date:
Tue Nov 22 11:43:05 2016 +0100
Parent:
34:edda6a7238ec
Child:
36:cc14f5a17bd4
Commit message:
Adapt 'module.json'

Changed in this revision

module.json Show annotated file Show diff for this revision Revisions of this file 
--- a/module.json	Tue Nov 22 11:40:10 2016 +0100
+++ b/module.json	Tue Nov 22 11:43:05 2016 +0100
@@ -1,14 +1,27 @@
 {
-    "name": "spirit1",
-    "config": {
-    	"mac-address-0": "0x0",
-    	"mac-address-1": "0x0",
-    	"mac-address-2": "0x0",
-    	"mac-address-3": "0x0",
-    	"mac-address-4": "0x0",
-    	"mac-address-5": "0x0",
-    	"mac-address-6": "0x0",
-    	"mac-address-7": "0x0"
-    },
-    "macros": ["USE_STM32F4XX_NUCLEO", "X_NUCLEO_IDS01A4", "SPIRIT_USE_FULL_ASSERT"]
+  "name": "stm-spirit1-rf-driver",
+  "version": "0.0.1",
+  "description": "RF driver for Atmel AT86RF233",
+  "keywords": [
+    "rf",
+    "driver"
+  ],
+  "author": "Seppo TakaloWolfgang Betz <wolfgang.betz@st.com>",
+  "dependencies": {
+    "nanostack-libservice": "^3.0.0",
+    "sal-stack-nanostack": "^5.0.0",
+    "mbed-drivers": "^1.0.0"
+  },
+  "targetDependencies": {}
+  "config": {
+    "mac-address-0": "0x0",
+    "mac-address-1": "0x0",
+    "mac-address-2": "0x0",
+    "mac-address-3": "0x0",
+    "mac-address-4": "0x0",
+    "mac-address-5": "0x0",
+    "mac-address-6": "0x0",
+    "mac-address-7": "0x0"
+  },
+  "macros": ["USE_STM32F4XX_NUCLEO", "X_NUCLEO_IDS01A4", "SPIRIT_USE_FULL_ASSERT"]
 }