ST / stm-spirit1-rf-driver

Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.

Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo

Currently supported boards:

Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:

  • Unmount resistor R4
  • Mount resistor R7

Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!

This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).

Files at this revision

API Documentation at this revision

Revision 54:0f6612d36a29, committed 2017-03-07

Comitter:
Wolfgang Betz
Date:
Tue Mar 07 08:34:31 2017 +0100
Parent:
53:b036a3a850e6
Child:
55:2bfbf1d07c14
Commit message:
Use macro `SPIRIT1_SPI_MOSI=PB_5` for pin mods

Changed in this revision

README.md Show annotated file Show diff for this revision Revisions of this file
stm-spirit1-rf-driver/NanostackRfPhySpirit1.h Show annotated file Show diff for this revision Revisions of this file 
--- a/README.md	Tue Feb 28 15:17:27 2017 +0100
+++ b/README.md	Tue Mar 07 08:34:31 2017 +0100
@@ -7,7 +7,6 @@
  * **Un**mount resistor `R4`
  * **Mount** resistor `R7`
  
-Furthermore, on some Nucleo development boards (e.g. the [NUCLEO_F429ZI](https://developer.mbed.org/platforms/ST-Nucleo-F429ZI/)), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro `PB5_ETH_PATCH` defined!
+Furthermore, on some Nucleo development boards (e.g. the [NUCLEO_F429ZI](https://developer.mbed.org/platforms/ST-Nucleo-F429ZI/)), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro `SPIRIT1_SPI_MOSI=PB_5` defined!
 
 This driver is used with 6LoWPAN stack.
-

--- a/stm-spirit1-rf-driver/NanostackRfPhySpirit1.h	Tue Feb 28 15:17:27 2017 +0100
+++ b/stm-spirit1-rf-driver/NanostackRfPhySpirit1.h	Tue Mar 07 08:34:31 2017 +0100
@@ -8,11 +8,7 @@
 
 // Arduino pin defaults for convenience
 #if !defined(SPIRIT1_SPI_MOSI)
-#ifdef PB5_ETH_PATCH
-#define SPIRIT1_SPI_MOSI   PB_5
-#else // !PB5_ETH_PATCH
 #define SPIRIT1_SPI_MOSI   D11
-#endif // !PB5_ETH_PATCH
 #endif
 #if !defined(SPIRIT1_SPI_MISO)
 #define SPIRIT1_SPI_MISO   D12