Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.
Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo
Currently supported boards:
Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:
- Unmount resistor
R4 - Mount resistor
R7
Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!
This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).
source/libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_Config.h
- Committer:
- Wolfgang Betz
- Date:
- 2016-11-22
- Revision:
- 34:edda6a7238ec
- Child:
- 67:93bec0baf1de
File content as of revision 34:edda6a7238ec:
/**
******************************************************************************
* @file SPIRIT_Config.h
* @author VMA division - AMS
* @version 3.2.2
* @date 08-July-2015
* @brief Spirit Configuration and useful defines
*
* @details
*
* This file is used to include all or a part of the Spirit
* libraries into the application program which will be used.
* Moreover some important parameters are defined here and the
* user is allowed to edit them.
*
* @attention
*
* <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __SPIRIT_CONFIG_H
#define __SPIRIT_CONFIG_H
/* Includes ------------------------------------------------------------------*/
#include "SPIRIT_Regs.h"
#include "SPIRIT_Aes.h"
#include "SPIRIT_Calibration.h"
#include "SPIRIT_Commands.h"
#include "SPIRIT_Csma.h"
#include "SPIRIT_DirectRF.h"
#include "SPIRIT_General.h"
#include "SPIRIT_Gpio.h"
#include "SPIRIT_Irq.h"
#include "SPIRIT_Timer.h"
#include "SPIRIT_LinearFifo.h"
#include "SPIRIT_PktBasic.h"
#include "SPIRIT_PktMbus.h"
#include "SPIRIT_PktStack.h"
#include "SPIRIT_Qi.h"
#include "SPIRIT_Radio.h"
#include "MCU_Interface.h"
#include "SPIRIT_Types.h"
#include "SPIRIT_Management.h"
#ifdef __cplusplus
extern "C" {
#endif
/** @addtogroup SPIRIT_Libraries SPIRIT Libraries
* @brief This firmware implements libraries which allow the user
* to manage the features of Spirit without knowing the hardware details.
* @details The <i>SPIRIT_Libraries</i> modules are totally platform independent. The library provides one
* module for each device feature. Each module refers to some functions whose prototypes are located in the
* header file <i>@ref MCU_Interface.h</i>. The user who want to use these libraries on a particular
* platform has to implement these functions respecting them signatures.
* @{
*/
/** @defgroup SPIRIT_Configuration Configuration
* @brief Spirit Configuration and useful defines.
* @details See the file <i>@ref SPIRIT_Config.h</i> for more details.
* @{
*/
/** @defgroup Configuration_Exported_Types Configuration Exported Types
* @{
*/
/**
* @}
*/
/** @defgroup Configuration_Exported_Constants Configuration Exported Constants
* @{
*/
#define DOUBLE_XTAL_THR 30000000
/**
* @}
*/
/** @defgroup Configuration_Exported_Macros Configuration Exported Macros
* @{
*/
/**
* @}
*/
/** @defgroup Configuration_Exported_Functions Configuration Exported Functions
* @{
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif
/******************* (C) COPYRIGHT 2015 STMicroelectronics *****END OF FILE****/
X-NUCLEO-IDS01A4 Sub-1GHz RF Expansion Board