Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.
Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo
Currently supported boards:
Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:
- Unmount resistor
R4 - Mount resistor
R7
Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!
This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).
source/libs/spirit1/SPIRIT1_Library/Src/SPIRIT_PktStack.c
- Committer:
- Wolfgang Betz
- Date:
- 2017-07-06
- Revision:
- 67:93bec0baf1de
- Parent:
- 34:edda6a7238ec
File content as of revision 67:93bec0baf1de:
/**
******************************************************************************
* @file SPIRIT_PktStack.c
* @author VMA division - AMS
* @version 3.2.2
* @date 08-July-2015
* @brief Configuration and management of SPIRIT STack packets.
* @details
*
* @attention
*
* <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "SPIRIT_PktStack.h"
#include "MCU_Interface.h"
/**
* @addtogroup SPIRIT_Libraries
* @{
*/
/**
* @addtogroup SPIRIT_PktStack
* @{
*/
/**
* @defgroup PktStack_Private_TypesDefinitions Pkt STack Private Types Definitions
* @{
*/
/**
*@}
*/
/**
* @defgroup PktStack_Private_Defines Pkt STack Private Defines
* @{
*/
/**
*@}
*/
/**
* @defgroup PktStack_Private_Macros Pkt STack Private Macros
* @{
*/
/**
*@}
*/
/**
* @defgroup PktStack_Private_Variables Pkt STack Private Variables
* @{
*/
/**
*@}
*/
/**
* @defgroup PktStack_Private_FunctionPrototypes Pkt STack Private Function Prototypes
* @{
*/
/**
*@}
*/
/**
* @defgroup PktStack_Private_Functions Pkt STack Private Functions
* @{
*/
/**
* @brief Initializes the SPIRIT STack packet according to the specified
* parameters in the PktStackInit.
* @param pxPktStackInit STack packet init structure.
* This parameter is a pointer to @ref PktStackInit.
* @retval None.
*/
void SpiritPktStackInit(PktStackInit* pxPktStackInit)
{
uint8_t tempRegValue[4], i;
/* Check the parameters */
s_assert_param(IS_STACK_PREAMBLE_LENGTH(pxPktStackInit->xPreambleLength));
s_assert_param(IS_STACK_SYNC_LENGTH(pxPktStackInit->xSyncLength));
s_assert_param(IS_STACK_CRC_MODE(pxPktStackInit->xCrcMode));
s_assert_param(IS_STACK_LENGTH_WIDTH_BITS(pxPktStackInit->cPktLengthWidth));
s_assert_param(IS_STACK_FIX_VAR_LENGTH(pxPktStackInit->xFixVarLength));
s_assert_param(IS_SPIRIT_FUNCTIONAL_STATE(pxPktStackInit->xFec));
s_assert_param(IS_SPIRIT_FUNCTIONAL_STATE(pxPktStackInit->xDataWhitening));
s_assert_param(IS_STACK_CONTROL_LENGTH(pxPktStackInit->xControlLength));
/* Reads the PROTOCOL1 register */
g_xStatus = SpiritSpiReadRegisters(PROTOCOL1_BASE, 1, &tempRegValue[0]);
/* Mask a reserved bit */
tempRegValue[0] &= ~0x20;
/* Always (!) set the automatic packet filtering */
tempRegValue[0] |= PROTOCOL1_AUTO_PCKT_FLT_MASK;
/* Writes the value on register */
g_xStatus = SpiritSpiWriteRegisters(PROTOCOL1_BASE, 1, &tempRegValue[0]);
/* Reads the PCKT_FLT_OPTIONS register */
g_xStatus = SpiritSpiReadRegisters(PCKT_FLT_OPTIONS_BASE, 1, &tempRegValue[0]);
/* Always reset the control and source filtering */
tempRegValue[0] &= ~(PCKT_FLT_OPTIONS_SOURCE_FILTERING_MASK | PCKT_FLT_OPTIONS_CONTROL_FILTERING_MASK);
/* Writes the value on register */
g_xStatus = SpiritSpiWriteRegisters(PCKT_FLT_OPTIONS_BASE, 1, &tempRegValue[0]);
/* Address and control length setting: source and destination address are always present so ADDRESS_LENGTH=2 */
tempRegValue[0] = 0x10 | ((uint8_t) pxPktStackInit->xControlLength);
/* Packet format and width length setting */
pxPktStackInit->cPktLengthWidth == 0 ? pxPktStackInit->cPktLengthWidth=1 : pxPktStackInit->cPktLengthWidth;
tempRegValue[1] = ((uint8_t) PCKTCTRL3_PCKT_FRMT_STACK) | ((uint8_t)(pxPktStackInit->cPktLengthWidth-1));
/* Preamble, sync and fixed or variable length setting */
tempRegValue[2] = ((uint8_t) pxPktStackInit->xPreambleLength) | ((uint8_t) pxPktStackInit->xSyncLength) |
((uint8_t) pxPktStackInit->xFixVarLength);
/* CRC length, whitening and FEC setting */
tempRegValue[3] = (uint8_t) pxPktStackInit->xCrcMode;
if(pxPktStackInit->xDataWhitening == S_ENABLE)
{
tempRegValue[3] |= PCKTCTRL1_WHIT_MASK;
}
if(pxPktStackInit->xFec == S_ENABLE)
{
tempRegValue[3] |= PCKTCTRL1_FEC_MASK;
}
/* Writes registers */
SpiritSpiWriteRegisters(PCKTCTRL4_BASE, 4, tempRegValue);
/* Sync words setting */
for(i=0;i<4;i++)
{
if(i<3-(pxPktStackInit->xSyncLength >>1))
{
tempRegValue[i]=0;
}
else
{
tempRegValue[i] = (uint8_t)(pxPktStackInit->lSyncWords>>(8*i));
}
}
/* Enables or disables the CRC check */
if(pxPktStackInit->xCrcMode == PKT_NO_CRC)
{
SpiritPktStackFilterOnCrc(S_DISABLE);
}
else
{
SpiritPktStackFilterOnCrc(S_ENABLE);
}
/* Writes registers */
g_xStatus = SpiritSpiWriteRegisters(SYNC4_BASE, 4, tempRegValue);
}
/**
* @brief Returns the SPIRIT STack packet structure according to the specified parameters in the registers.
* @param pxPktStackInit STack packet init structure.
* This parameter is a pointer to @ref PktStackInit.
* @retval None.
*/
void SpiritPktStackGetInfo(PktStackInit* pxPktStackInit)
{
uint8_t tempRegValue[10];
/* Reads registers */
g_xStatus = SpiritSpiReadRegisters(PCKTCTRL4_BASE, 10, tempRegValue);
/* Length width */
pxPktStackInit->cPktLengthWidth=(tempRegValue[1] & 0x0F)+1;
/* Control length */
pxPktStackInit->xControlLength=(StackControlLength)(tempRegValue[0] & 0x07);
/* CRC mode */
pxPktStackInit->xCrcMode=(StackCrcMode)(tempRegValue[3] & 0xE0);
/* Whitening */
pxPktStackInit->xDataWhitening=(SpiritFunctionalState)((tempRegValue[3] >> 4) & 0x01);
/* FEC */
pxPktStackInit->xFec=(SpiritFunctionalState)(tempRegValue[3] & 0x01);
/* FIX or VAR bit */
pxPktStackInit->xFixVarLength=(StackFixVarLength)(tempRegValue[2] & 0x01);
/* Preamble length */
pxPktStackInit->xPreambleLength=(StackPreambleLength)(tempRegValue[2] & 0xF8);
/* Sync length */
pxPktStackInit->xSyncLength=(StackSyncLength)(tempRegValue[2] & 0x06);
/* sync Words */
pxPktStackInit->lSyncWords=0;
for(uint8_t i=0 ; i<4 ; i++)
{
if(i>2-(pxPktStackInit->xSyncLength >>1))
{
pxPktStackInit->lSyncWords |= tempRegValue[i+6]<<(8*i);
}
}
}
/**
* @brief Initializes the SPIRIT STack packet addresses according to the specified
* parameters in the PktStackAddresses struct.
* @param pxPktStackAddresses STack packet addresses init structure.
* This parameter is a pointer to @ref PktStackAddressesInit .
* @retval None.
*/
void SpiritPktStackAddressesInit(PktStackAddressesInit* pxPktStackAddresses)
{
uint8_t tempRegValue[3];
/* Check the parameters */
s_assert_param(IS_SPIRIT_FUNCTIONAL_STATE(pxPktStackAddresses->xFilterOnMyAddress));
s_assert_param(IS_SPIRIT_FUNCTIONAL_STATE(pxPktStackAddresses->xFilterOnMulticastAddress));
s_assert_param(IS_SPIRIT_FUNCTIONAL_STATE(pxPktStackAddresses->xFilterOnBroadcastAddress));
/* Reads the filtering options ragister */
g_xStatus = SpiritSpiReadRegisters(PCKT_FLT_OPTIONS_BASE, 1, &tempRegValue[0]);
/* Enables or disables filtering on my address */
if(pxPktStackAddresses->xFilterOnMyAddress == S_ENABLE)
{
tempRegValue[0] |= PCKT_FLT_OPTIONS_DEST_VS_TX_ADDR_MASK;
}
else
{
tempRegValue[0] &= ~PCKT_FLT_OPTIONS_DEST_VS_TX_ADDR_MASK;
}
/* Enables or disables filtering on multicast address */
if(pxPktStackAddresses->xFilterOnMulticastAddress == S_ENABLE)
{
tempRegValue[0] |= PCKT_FLT_OPTIONS_DEST_VS_MULTICAST_ADDR_MASK;
}
else
{
tempRegValue[0] &= ~PCKT_FLT_OPTIONS_DEST_VS_MULTICAST_ADDR_MASK;
}
/* Enables or disables filtering on broadcast address */
if(pxPktStackAddresses->xFilterOnBroadcastAddress == S_ENABLE)
{
tempRegValue[0] |= PCKT_FLT_OPTIONS_DEST_VS_BROADCAST_ADDR_MASK;
}
else
{
tempRegValue[0] &= ~PCKT_FLT_OPTIONS_DEST_VS_BROADCAST_ADDR_MASK;
}
/* Writes value on the register */
g_xStatus = SpiritSpiWriteRegisters(PCKT_FLT_OPTIONS_BASE, 1, &tempRegValue[0]);
/* Fills array with the addresses passed in the structure */
tempRegValue[0] = pxPktStackAddresses->cBroadcastAddress;
tempRegValue[1] = pxPktStackAddresses->cMulticastAddress;
tempRegValue[2] = pxPktStackAddresses->cMyAddress;
/* Writes them on the addresses registers */
g_xStatus = SpiritSpiWriteRegisters(PCKT_FLT_GOALS_BROADCAST_BASE, 3, tempRegValue);
}
/**
* @brief Returns the SPIRIT STack packet addresses structure according to the specified
* parameters in the registers.
* @param pxPktStackAddresses STack packet addresses init structure.
* This parameter is a pointer to @ref PktStackAddresses.
* @retval None.
*/
void SpiritPktStackGetAddressesInfo(PktStackAddressesInit* pxPktStackAddresses)
{
uint8_t tempRegValue[3];
/* Reads values on the PCKT_FLT_GOALS registers */
g_xStatus = SpiritSpiReadRegisters(PCKT_FLT_GOALS_BROADCAST_BASE, 3, tempRegValue);
/* Fit the structure with the read addresses */
pxPktStackAddresses->cBroadcastAddress = tempRegValue[0];
pxPktStackAddresses->cMulticastAddress = tempRegValue[1];
pxPktStackAddresses->cMyAddress = tempRegValue[2];
g_xStatus = SpiritSpiReadRegisters(PCKT_FLT_OPTIONS_BASE, 1, &tempRegValue[0]);
/* Fit the structure with the read filtering bits */
pxPktStackAddresses->xFilterOnBroadcastAddress = (SpiritFunctionalState)((tempRegValue[0] >> 1) & 0x01);
pxPktStackAddresses->xFilterOnMulticastAddress = (SpiritFunctionalState)((tempRegValue[0] >> 2) & 0x01);
pxPktStackAddresses->xFilterOnMyAddress = (SpiritFunctionalState)((tempRegValue[0] >> 3) & 0x01);
}
/**
* @brief Initializes the SPIRIT STack packet LLP options according to the specified
* parameters in the PktStackLlpInit struct.
* @param pxPktStackLlpInit STack packet LLP init structure.
* This parameter is a pointer to @ref PktStackLlpInit.
* @retval None.
*/
void SpiritPktStackLlpInit(PktStackLlpInit* pxPktStackLlpInit)
{
uint8_t tempRegValue[2];
/* Check the parameters */
s_assert_param(IS_SPIRIT_FUNCTIONAL_STATE(pxPktStackLlpInit->xPiggybacking));
s_assert_param(IS_SPIRIT_FUNCTIONAL_STATE(pxPktStackLlpInit->xAutoAck));
s_assert_param(IS_STACK_NMAX_RETX(pxPktStackLlpInit->xNMaxRetx));
/* check if piggybacking is enabled and autoack is disabled */
s_assert_param(!(pxPktStackLlpInit->xPiggybacking==S_ENABLE && pxPktStackLlpInit->xAutoAck==S_DISABLE));
/* Piggybacking mechanism setting on the PROTOCOL1 register */
g_xStatus = SpiritSpiReadRegisters(PROTOCOL1_BASE, 2, tempRegValue);
if(pxPktStackLlpInit->xPiggybacking == S_ENABLE)
{
tempRegValue[0] |= PROTOCOL1_PIGGYBACKING_MASK;
}
else
{
tempRegValue[0] &= ~PROTOCOL1_PIGGYBACKING_MASK;
}
/* RX and TX autoack mechanisms setting on the PROTOCOL0 register */
if(pxPktStackLlpInit->xAutoAck == S_ENABLE)
{
tempRegValue[1] |= PROTOCOL0_AUTO_ACK_MASK;
}
else
{
tempRegValue[1] &= ~PROTOCOL0_AUTO_ACK_MASK;
}
/* Max number of retransmission setting */
tempRegValue[1] &= ~PROTOCOL0_NMAX_RETX_MASK;
tempRegValue[1] |= pxPktStackLlpInit->xNMaxRetx;
/* Writes registers */
g_xStatus = SpiritSpiWriteRegisters(PROTOCOL1_BASE, 2, tempRegValue);
}
/**
* @brief Returns the SPIRIT STack packet LLP options according to the specified
* values in the registers.
* @param pxPktStackLlpInit STack packet LLP structure.
* This parameter is a pointer to @ref PktStackLlpInit.
* @retval None.
*/
void SpiritPktStackLlpGetInfo(PktStackLlpInit* pxPktStackLlpInit)
{
uint8_t tempRegValue[2];
/* Piggybacking mechanism setting on the PROTOCOL1 register */
g_xStatus = SpiritSpiReadRegisters(PROTOCOL1_BASE, 2, tempRegValue);
/* Fit the structure with the read values */
pxPktStackLlpInit->xPiggybacking = (SpiritFunctionalState)((tempRegValue[0] >> 6) & 0x01);
pxPktStackLlpInit->xAutoAck = (SpiritFunctionalState)((tempRegValue[1] >> 2) & 0x01);
pxPktStackLlpInit->xNMaxRetx = (StackNMaxReTx)(tempRegValue[1] & PROTOCOL0_NMAX_RETX_MASK);
}
/**
* @brief Configures the STack packet format for SPIRIT.
* @param None.
* @retval None.
*/
void SpiritPktStackSetFormat(void)
{
uint8_t tempRegValue;
/* Reads the PCKTCTRL3 register value */
g_xStatus = SpiritSpiReadRegisters(PCKTCTRL3_BASE, 1, &tempRegValue);
/* Build value to be written. Also set to 0 the direct RX mode bits */
tempRegValue &= 0x0F;
tempRegValue |= ((uint8_t)PCKTCTRL3_PCKT_FRMT_STACK);
/* Writes the value on the PCKTCTRL3 register. */
g_xStatus = SpiritSpiWriteRegisters(PCKTCTRL3_BASE, 1, &tempRegValue);
/* Reads the PCKTCTRL1 register value */
g_xStatus = SpiritSpiReadRegisters(PCKTCTRL1_BASE, 1, &tempRegValue);
/* Build the new value. Set to 0 the direct TX mode bits */
tempRegValue &= 0xF3;
/* Writes the PCKTCTRL1 value on register */
g_xStatus = SpiritSpiWriteRegisters(PCKTCTRL1_BASE, 1, &tempRegValue);
/* Reads the PROTOCOL1 register */
g_xStatus = SpiritSpiReadRegisters(PROTOCOL1_BASE, 1, &tempRegValue);
/* Mask a reserved bit */
tempRegValue &= ~0x20;
/* Writes the value on the PROTOCOL1 register */
g_xStatus = SpiritSpiWriteRegisters(PROTOCOL1_BASE, 1, &tempRegValue);
}
/**
* @brief Sets the address length for SPIRIT STack packets (always 2).
* @param None.
* @retval None.
*/
void SpiritPktStackSetAddressLength(void)
{
uint8_t tempRegValue;
/* Reads the PCKTCTRL4 register value */
g_xStatus = SpiritSpiReadRegisters(PCKTCTRL4_BASE, 1, &tempRegValue);
/* Build the new value */
tempRegValue &= ~PCKTCTRL4_ADDRESS_LEN_MASK;
tempRegValue |= ((uint8_t)0x10);
/* Writes the value on the PCKTCTRL4 register */
g_xStatus = SpiritSpiWriteRegisters(PCKTCTRL4_BASE, 1, &tempRegValue);
}
/**
* @brief Sets the payload length for SPIRIT STack packets. Since the packet length
* depends from the address (always 2 for this packet format)
* and the control field size, this function reads the control length register
* content in order to determine the correct packet length to be written.
* @param nPayloadLength payload length in bytes.
* This parameter can be any value of uint16_t.
* @retval None.
*/
void SpiritPktStackSetPayloadLength(uint16_t nPayloadLength)
{
uint8_t tempRegValue[2];
/* Computes the oversize (address + control) size */
uint16_t overSize = 2 + (uint16_t) SpiritPktStackGetControlLength();
/* Computes PCKTLEN0 value from lPayloadLength */
tempRegValue[1]=STACK_BUILD_PCKTLEN0(nPayloadLength+overSize);
/* Computes PCKTLEN1 value from lPayloadLength */
tempRegValue[0]=STACK_BUILD_PCKTLEN1(nPayloadLength+overSize);
/* Writes the value on the PCKTLENx registers */
g_xStatus = SpiritSpiWriteRegisters(PCKTLEN1_BASE, 2, tempRegValue);
}
/**
* @brief Returns the payload length for SPIRIT STack packets. Since the
* packet length depends from the address and the control
* field size, this function reads the correspondent
* registers in order to determine the correct payload length
* to be returned.
* @param None.
* @retval uint16_t Payload length.
*/
uint16_t SpiritPktStackGetPayloadLength(void)
{
uint8_t tempRegValue[2];
/* Computes the oversize (address + control) size */
uint16_t overSize = 2 + (uint16_t) SpiritPktStackGetControlLength();
/* Reads the PCKTLEN1 registers value */
g_xStatus = SpiritSpiReadRegisters(PCKTLEN1_BASE, 2, tempRegValue);
/* Rebuild and return the payload length value */
return ((((uint16_t) tempRegValue[1])<<8) + (uint16_t) tempRegValue[0] - overSize);
}
/**
* @brief Computes and sets the variable payload length for SPIRIT STack packets.
* @param nMaxPayloadLength payload length in bytes.
* This parameter is an uint16_t.
* @param xControlLength control length in bytes.
* This parameter can be any value of @ref StackControlLength.
* @retval None.
*/
void SpiritPktStackSetVarLengthWidth(uint16_t nMaxPayloadLength, StackControlLength xControlLength)
{
uint8_t tempRegValue,
i;
uint32_t packetLength;
/* packet length = payload length + address length (2) + control length */
packetLength=nMaxPayloadLength+2+xControlLength;
/* Computes the number of bits */
for(i=0;i<16;i++)
{
if(packetLength == 0)
{
break;
}
packetLength >>= 1;
}
i==0 ? i=1 : i;
/* Reads the PCKTCTRL3 register value */
g_xStatus = SpiritSpiReadRegisters(PCKTCTRL3_BASE, 1, &tempRegValue);
/* Build the register value */
tempRegValue &= ~PCKTCTRL3_LEN_WID_MASK;
tempRegValue |= ((uint8_t)(i-1));
/* Writes the PCKTCTRL3 register value */
g_xStatus = SpiritSpiWriteRegisters(PCKTCTRL3_BASE, 1, &tempRegValue);
}
/**
* @brief Rx packet source mask. Used to mask the address of the accepted packets. If 0 -> no filtering.
* @param cMask Rx source mask.
* This parameter is an uint8_t.
* @retval None.
*/
void SpiritPktStackSetRxSourceMask(uint8_t cMask)
{
/* Writes value on the register PCKT_FLT_GOALS_SOURCE_MASK */
g_xStatus = SpiritSpiWriteRegisters(PCKT_FLT_GOALS_SOURCE_MASK_BASE, 1, &cMask);
}
/**
* @brief Returns the Rx packet source mask. Used to mask the address of the accepted packets. If 0 -> no filtering.
* @param None.
* @retval uint8_t Rx source mask.
*/
uint8_t SpiritPktStackGetRxSourceMask(void)
{
uint8_t tempRegValue;
/* Writes value on the PCKT_FLT_GOALS_SOURCE_MASK register */
g_xStatus = SpiritSpiReadRegisters(PCKT_FLT_GOALS_SOURCE_MASK_BASE, 1, &tempRegValue);
/* Return the read value */
return tempRegValue;
}
/**
* @brief Returns the packet length field of the received packet.
* @param None.
* @retval uint16_t Packet length.
*/
uint16_t SpiritPktStackGetReceivedPktLength(void)
{
uint8_t tempRegValue[2];
uint16_t tempLength;
/* Reads the RX_PCKT_LENx registers value */
g_xStatus = SpiritSpiReadRegisters(RX_PCKT_LEN1_BASE, 2, tempRegValue);
/* Rebuild and return the the length field */
tempLength = ((((uint16_t) tempRegValue[0]) << 8) + (uint16_t) tempRegValue[1]);
/* Computes the oversize (address + control) size */
tempLength -= 2 + (uint16_t) SpiritPktStackGetControlLength();
return tempLength;
}
/**
* @brief If enabled RX packet is accepted only if the masked source address field matches the
* masked source address field reference (SOURCE_MASK & SOURCE_FIELD_REF == SOURCE_MASK & RX_SOURCE_FIELD).
* @param xNewState new state for Source address filtering enable bit.
* This parameter can be S_ENABLE or S_DISABLE.
* @retval None.
* @note This filtering control is enabled by default but the source address mask is by default set to 0.
* As a matter of fact the user has to enable the source filtering bit after the packet initialization
* because the PktInit routine disables it.
*/
void SpiritPktStackFilterOnSourceAddress(SpiritFunctionalState xNewState)
{
uint8_t tempRegValue;
/* Check the parameters */
s_assert_param(IS_SPIRIT_FUNCTIONAL_STATE(xNewState));
/* Modify the register value: set or reset the source bit filtering */
g_xStatus = SpiritSpiReadRegisters(PCKT_FLT_OPTIONS_BASE, 1, &tempRegValue);
/* Set or reset the SOURCE ADDRESS filtering enabling bit */
if(xNewState == S_ENABLE)
{
tempRegValue |= PCKT_FLT_OPTIONS_SOURCE_FILTERING_MASK;
}
else
{
tempRegValue &= ~PCKT_FLT_OPTIONS_SOURCE_FILTERING_MASK;
}
/* Writes the new value on the PCKT_FLT_OPTIONS register */
g_xStatus = SpiritSpiWriteRegisters(PCKT_FLT_OPTIONS_BASE, 1, &tempRegValue);
}
/**
*@}
*/
/**
*@}
*/
/**
*@}
*/
/******************* (C) COPYRIGHT 2015 STMicroelectronics *****END OF FILE****/
X-NUCLEO-IDS01A4 Sub-1GHz RF Expansion Board