ST / stm-spirit1-rf-driver

Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.

Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo

Currently supported boards:

Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:

  • Unmount resistor R4
  • Mount resistor R7

Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!

This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).

libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_Management.h

Committer:
Wolfgang Betz
Date:
2016-10-13
Revision:
0:4fb29d9ee571

File content as of revision 0:4fb29d9ee571:

/**
  ******************************************************************************
 * @file    SPIRIT_Management.h
  * @author  VMA division - AMS
  * @version 3.2.2
  * @date    08-July-2015
 * @brief   The management layer for SPIRIT1 library.
 * @details
 *
  * @attention
 *
  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
 *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
 */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef SPIRIT_MANAGEMENT_H_
#define SPIRIT_MANAGEMENT_H_

/* Includes ------------------------------------------------------------------*/
#include "SPIRIT_Config.h"

#ifdef __cplusplus
  extern "C" {
#endif


/**
 * @addtogroup SPIRIT_Libraries
 * @{
 */


/**
 * @defgroup SPIRIT_MANAGEMENT          Management
 * @brief Workarounds for Spirit1.
 * @details See the file <i>@ref SPIRIT_Management.h</i> for more details.
 * @{
 */


/**
 * @addgroup SPIRIT_MANAGEMENT_FUNCTIONS
 * @{
 */

   


uint8_t SpiritManagementWaVcoCalibration(void);
void SpiritManagementWaCmdStrobeTx(void);
void SpiritManagementWaCmdStrobeRx(void);
void SpiritManagementWaTRxFcMem(uint32_t nDesiredFreq);
void SpiritManagementWaExtraCurrent(void);

/**
* @}
*/

/**
* @}
*/

/**
* @}
*/

#ifdef __cplusplus
}
#endif


#endif


 /******************* (C) COPYRIGHT 2015 STMicroelectronics *****END OF FILE****/