Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.
Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo
Currently supported boards:
Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:
- Unmount resistor
R4 - Mount resistor
R7
Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!
This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).
libs/Contiki_STM32_Library/ip64-conf.h
- Committer:
- Wolfgang Betz
- Date:
- 2016-10-13
- Revision:
- 0:4fb29d9ee571
File content as of revision 0:4fb29d9ee571:
/*
* Copyright (c) 2012, Thingsquare, http://www.thingsquare.com/.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#ifndef IP64_CONF_H
#define IP64_CONF_H
/*
#include "ip64-tap-driver.h"
#include "ip64-eth-interface.h"
#define IP64_CONF_UIP_FALLBACK_INTERFACE ip64_eth_interface
#define IP64_CONF_INPUT ip64_eth_interface_input
#define IP64_CONF_ETH_DRIVER ip64_tap_driver
#undef UIP_FALLBACK_INTERFACE
#define UIP_FALLBACK_INTERFACE ip64_uip_fallback_interface
*/
#ifdef MY_DRIVERS
#include <my_wifi_interface.h>
#include <my_wifi_driver.h>
#define IP64_CONF_UIP_FALLBACK_INTERFACE_SLIP 0
#define IP64_CONF_UIP_FALLBACK_INTERFACE my_wifi_interface
#define IP64_CONF_INPUT my_wifi_interface_input
#define IP64_CONF_ETH_DRIVER my_wifi_driver
#undef UIP_CONF_ND6_RA_RDNSS
#define UIP_CONF_ND6_RA_RDNSS 1
#undef UIP_CONF_ND6_SEND_RA
#define UIP_CONF_ND6_SEND_RA 1
#undef UIP_CONF_ROUTER
#define UIP_CONF_ROUTER 1
#ifndef QUEUEBUF_CONF_NUM
#define QUEUEBUF_CONF_NUM 16
#endif
#else
#include "net/ip64/ip64-slip-interface.h"
#include "net/ip64/ip64-null-driver.h"
#define IP64_CONF_UIP_FALLBACK_INTERFACE_SLIP 1
#define IP64_CONF_UIP_FALLBACK_INTERFACE ip64_slip_interface
#define IP64_CONF_INPUT ip64_slip_interface_input
#define IP64_CONF_ETH_DRIVER ip64_null_driver
#undef UIP_CONF_ND6_RA_RDNSS
#define UIP_CONF_ND6_RA_RDNSS 1
#undef UIP_CONF_ND6_SEND_RA
#define UIP_CONF_ND6_SEND_RA 1
#undef UIP_CONF_ROUTER
#define UIP_CONF_ROUTER 1
#ifndef QUEUEBUF_CONF_NUM
#define QUEUEBUF_CONF_NUM 16
#endif
#endif//MY_DRIVERS
#endif /* IP64_CONF_H */
X-NUCLEO-IDS01A4 Sub-1GHz RF Expansion Board