Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.
Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo
Currently supported boards:
Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:
- Unmount resistor
R4 - Mount resistor
R7
Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!
This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).
Diff: source/libs/spirit1/X-NUCLEO-IDS01Ax/radio_shield_config.h
- Revision:
- 34:edda6a7238ec
- Child:
- 67:93bec0baf1de
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/source/libs/spirit1/X-NUCLEO-IDS01Ax/radio_shield_config.h Tue Nov 22 11:40:10 2016 +0100
@@ -0,0 +1,120 @@
+/**
+******************************************************************************
+* @file radio_shield_config.h
+* @author System Lab - NOIDA
+* @version V1.0.0
+* @date 15-May-2014
+* @brief This file contains definitions for:
+* - LEDs and push-button available on RF shields
+******************************************************************************
+* @attention
+*
+* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+*
+* Redistribution and use in source and binary forms, with or without modification,
+* are permitted provided that the following conditions are met:
+* 1. Redistributions of source code must retain the above copyright notice,
+* this list of conditions and the following disclaimer.
+* 2. Redistributions in binary form must reproduce the above copyright notice,
+* this list of conditions and the following disclaimer in the documentation
+* and/or other materials provided with the distribution.
+* 3. Neither the name of STMicroelectronics nor the names of its contributors
+* may be used to endorse or promote products derived from this software
+* without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+******************************************************************************
+*/
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __RADIO_SHIELD_CONFIG_H
+#define __RADIO_SHIELD_CONFIG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#ifdef USE_STM32L1XX_NUCLEO
+// #include "stm32l1xx_hal.h"
+#endif
+
+#ifdef USE_STM32F4XX_NUCLEO
+// #include "stm32f4xx_hal.h"
+#endif
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup X-NUCLEO-IDS02Ax
+ * @{
+ */
+
+/** @addtogroup RADIO_SHILED_LOW_LEVEL
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+typedef enum
+{
+ RADIO_SHIELD_LED = 0
+} Led_t;
+
+
+
+/* Exported constants --------------------------------------------------------*/
+
+
+/* Exported macro ------------------------------------------------------------*/
+ /** @addtogroup RF_SHIELD_CONFIG_LOW_LEVEL_LED
+ * @{
+ */
+#define RADIO_SHIELD_LEDn ((uint8_t)1)
+
+#define RADIO_SHIELD_LED_GPIO_PIN GPIO_PIN_4 /*Rx Indicator LED*/
+#define RADIO_SHIELD_LED_GPIO_PORT GPIOB
+#define RADIO_SHIELD_LED_GPIO_CLK_ENABLE() __GPIOB_CLK_ENABLE()
+#define RADIO_SHIELD_LED_GPIO_CLK_DISABLE() __GPIOB_CLK_DISABLE()
+
+
+/* Exported Variables ------------------------------------------------------------*/
+
+
+/* Exported functions ------------------------------------------------------- */
+void RadioShieldLedInit(Led_t Led);
+void RadioShieldLedOn(Led_t Led);
+void RadioShieldLedOff(Led_t Led);
+void RadioShieldLedToggle(Led_t Led);
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __RADIO_SHIELD_CONFIG_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
X-NUCLEO-IDS01A4 Sub-1GHz RF Expansion Board