Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.

Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo

Currently supported boards:

Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:

  • Unmount resistor R4
  • Mount resistor R7

Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!

This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).

Revision:
34:edda6a7238ec
Child:
67:93bec0baf1de
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/source/libs/spirit1/SPIRIT1_Library/Src/SPIRIT_PktStack.c	Tue Nov 22 11:40:10 2016 +0100
@@ -0,0 +1,687 @@
+/**
+  ******************************************************************************
+  * @file    SPIRIT_PktStack.c
+  * @author  VMA division - AMS
+  * @version 3.2.2
+  * @date    08-July-2015
+  * @brief   Configuration and management of SPIRIT STack packets.
+  * @details
+  *
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "SPIRIT_PktStack.h"
+#include "MCU_Interface.h"
+
+
+/**
+ * @addtogroup SPIRIT_Libraries
+ * @{
+ */
+
+
+/**
+ * @addtogroup SPIRIT_PktStack
+ * @{
+ */
+
+
+/**
+ * @defgroup PktStack_Private_TypesDefinitions          Pkt STack Private Types Definitions
+ * @{
+ */
+
+/**
+ *@}
+ */
+
+
+/**
+ * @defgroup PktStack_Private_Defines                   Pkt STack Private Defines
+ * @{
+ */
+
+/**
+ *@}
+ */
+
+
+/**
+ * @defgroup PktStack_Private_Macros                    Pkt STack Private Macros
+ * @{
+ */
+
+/**
+ *@}
+ */
+
+
+/**
+ * @defgroup PktStack_Private_Variables                 Pkt STack Private Variables
+ * @{
+ */
+
+/**
+ *@}
+ */
+
+
+/**
+ * @defgroup PktStack_Private_FunctionPrototypes        Pkt STack Private Function Prototypes
+ * @{
+ */
+
+/**
+ *@}
+ */
+
+
+/**
+ * @defgroup PktStack_Private_Functions                 Pkt STack Private Functions
+ * @{
+ */
+
+
+/**
+ * @brief  Initializes the SPIRIT STack packet according to the specified
+ *         parameters in the PktStackInit.
+ * @param  pxPktStackInit STack packet init structure.
+ *         This parameter is a pointer to @ref PktStackInit.
+ * @retval None.
+ */
+void SpiritPktStackInit(PktStackInit* pxPktStackInit)
+{
+  uint8_t tempRegValue[4], i;
+
+  /* Check the parameters */
+  s_assert_param(IS_STACK_PREAMBLE_LENGTH(pxPktStackInit->xPreambleLength));
+  s_assert_param(IS_STACK_SYNC_LENGTH(pxPktStackInit->xSyncLength));
+  s_assert_param(IS_STACK_CRC_MODE(pxPktStackInit->xCrcMode));
+  s_assert_param(IS_STACK_LENGTH_WIDTH_BITS(pxPktStackInit->cPktLengthWidth));
+  s_assert_param(IS_STACK_FIX_VAR_LENGTH(pxPktStackInit->xFixVarLength));
+  s_assert_param(IS_SPIRIT_FUNCTIONAL_STATE(pxPktStackInit->xFec));
+  s_assert_param(IS_SPIRIT_FUNCTIONAL_STATE(pxPktStackInit->xDataWhitening));
+  s_assert_param(IS_STACK_CONTROL_LENGTH(pxPktStackInit->xControlLength));
+
+
+  /* Reads the PROTOCOL1 register */
+  g_xStatus = SpiritSpiReadRegisters(PROTOCOL1_BASE, 1, &tempRegValue[0]);
+
+  /* Mask a reserved bit */
+  tempRegValue[0] &= ~0x20;
+
+  /* Always (!) set the automatic packet filtering */
+  tempRegValue[0] |= PROTOCOL1_AUTO_PCKT_FLT_MASK;
+
+  /* Writes the value on register */
+  g_xStatus = SpiritSpiWriteRegisters(PROTOCOL1_BASE, 1, &tempRegValue[0]);
+
+  /* Reads the PCKT_FLT_OPTIONS register */
+  g_xStatus = SpiritSpiReadRegisters(PCKT_FLT_OPTIONS_BASE, 1, &tempRegValue[0]);
+
+  /* Always reset the control and source filtering */
+  tempRegValue[0] &= ~(PCKT_FLT_OPTIONS_SOURCE_FILTERING_MASK | PCKT_FLT_OPTIONS_CONTROL_FILTERING_MASK);
+
+  /* Writes the value on register */
+  g_xStatus = SpiritSpiWriteRegisters(PCKT_FLT_OPTIONS_BASE, 1, &tempRegValue[0]);
+
+
+  /* Address and control length setting: source and destination address are always present so ADDRESS_LENGTH=2 */
+  tempRegValue[0] = 0x10 | ((uint8_t) pxPktStackInit->xControlLength);
+
+
+  /* Packet format and width length setting */
+  pxPktStackInit->cPktLengthWidth == 0 ? pxPktStackInit->cPktLengthWidth=1 : pxPktStackInit->cPktLengthWidth;
+  tempRegValue[1] = ((uint8_t) PCKTCTRL3_PCKT_FRMT_STACK) | ((uint8_t)(pxPktStackInit->cPktLengthWidth-1));
+
+  /* Preamble, sync and fixed or variable length setting */
+  tempRegValue[2] = ((uint8_t) pxPktStackInit->xPreambleLength) | ((uint8_t) pxPktStackInit->xSyncLength) |
+                    ((uint8_t) pxPktStackInit->xFixVarLength);
+
+  /* CRC length, whitening and FEC setting */
+  tempRegValue[3] = (uint8_t) pxPktStackInit->xCrcMode;
+
+  if(pxPktStackInit->xDataWhitening == S_ENABLE)
+  {
+     tempRegValue[3] |= PCKTCTRL1_WHIT_MASK;
+  }
+
+  if(pxPktStackInit->xFec == S_ENABLE)
+  {
+     tempRegValue[3] |= PCKTCTRL1_FEC_MASK;
+  }
+  
+  /* Writes registers */
+  SpiritSpiWriteRegisters(PCKTCTRL4_BASE, 4, tempRegValue);
+
+  /* Sync words setting */
+  for(i=0;i<4;i++)
+  {
+    if(i<3-(pxPktStackInit->xSyncLength >>1))
+    {
+      tempRegValue[i]=0;
+    }
+    else
+    {
+      tempRegValue[i] = (uint8_t)(pxPktStackInit->lSyncWords>>(8*i));
+    }
+  }
+
+  /* Enables or disables the CRC check */
+  if(pxPktStackInit->xCrcMode == PKT_NO_CRC)
+  {
+    SpiritPktStackFilterOnCrc(S_DISABLE);
+  }
+  else
+  {
+    SpiritPktStackFilterOnCrc(S_ENABLE);
+  }
+
+  /* Writes registers */
+  g_xStatus = SpiritSpiWriteRegisters(SYNC4_BASE, 4, tempRegValue);
+
+}
+
+
+/**
+ * @brief  Returns the SPIRIT STack packet structure according to the specified parameters in the registers.
+ * @param  pxPktStackInit STack packet init structure.
+ *         This parameter is a pointer to @ref PktStackInit.
+ * @retval None.
+ */
+void SpiritPktStackGetInfo(PktStackInit* pxPktStackInit)
+{
+  uint8_t tempRegValue[10];
+
+  /* Reads registers */
+  g_xStatus = SpiritSpiReadRegisters(PCKTCTRL4_BASE, 10, tempRegValue);
+
+  /* Length width */
+  pxPktStackInit->cPktLengthWidth=(tempRegValue[1] & 0x0F)+1;
+
+  /* Control length */
+  pxPktStackInit->xControlLength=(StackControlLength)(tempRegValue[0] & 0x07);
+
+  /* CRC mode */
+  pxPktStackInit->xCrcMode=(StackCrcMode)(tempRegValue[3] & 0xE0);
+
+  /* Whitening */
+  pxPktStackInit->xDataWhitening=(SpiritFunctionalState)((tempRegValue[3] >> 4) & 0x01);
+
+  /* FEC */
+  pxPktStackInit->xFec=(SpiritFunctionalState)(tempRegValue[3] & 0x01);
+
+  /* FIX or VAR bit */
+  pxPktStackInit->xFixVarLength=(StackFixVarLength)(tempRegValue[2] & 0x01);
+
+  /* Preamble length */
+  pxPktStackInit->xPreambleLength=(StackPreambleLength)(tempRegValue[2] & 0xF8);
+
+  /* Sync length */
+  pxPktStackInit->xSyncLength=(StackSyncLength)(tempRegValue[2] & 0x06);
+
+  /* sync Words */
+  pxPktStackInit->lSyncWords=0;
+  for(uint8_t i=0 ; i<4 ; i++)
+  {
+      if(i>2-(pxPktStackInit->xSyncLength >>1))
+      {
+        pxPktStackInit->lSyncWords |= tempRegValue[i+6]<<(8*i);
+      }
+  }
+
+}
+
+
+/**
+ * @brief  Initializes the SPIRIT STack packet addresses according to the specified
+ *         parameters in the PktStackAddresses struct.
+ * @param  pxPktStackAddresses STack packet addresses init structure.
+ *         This parameter is a pointer to @ref PktStackAddressesInit .
+ * @retval None.
+ */
+void SpiritPktStackAddressesInit(PktStackAddressesInit* pxPktStackAddresses)
+{
+  uint8_t tempRegValue[3];
+
+  /* Check the parameters */
+  s_assert_param(IS_SPIRIT_FUNCTIONAL_STATE(pxPktStackAddresses->xFilterOnMyAddress));
+  s_assert_param(IS_SPIRIT_FUNCTIONAL_STATE(pxPktStackAddresses->xFilterOnMulticastAddress));
+  s_assert_param(IS_SPIRIT_FUNCTIONAL_STATE(pxPktStackAddresses->xFilterOnBroadcastAddress));
+  
+  /* Reads the filtering options ragister */
+  g_xStatus = SpiritSpiReadRegisters(PCKT_FLT_OPTIONS_BASE, 1, &tempRegValue[0]);
+  
+  /* Enables or disables filtering on my address */
+  if(pxPktStackAddresses->xFilterOnMyAddress == S_ENABLE)
+  {
+    tempRegValue[0] |= PCKT_FLT_OPTIONS_DEST_VS_TX_ADDR_MASK;
+  }
+  else
+  {
+    tempRegValue[0] &= ~PCKT_FLT_OPTIONS_DEST_VS_TX_ADDR_MASK;
+  }
+  
+  /* Enables or disables filtering on multicast address */
+  if(pxPktStackAddresses->xFilterOnMulticastAddress == S_ENABLE)
+  {
+    tempRegValue[0] |= PCKT_FLT_OPTIONS_DEST_VS_MULTICAST_ADDR_MASK;
+  }
+  else
+  {
+    tempRegValue[0] &= ~PCKT_FLT_OPTIONS_DEST_VS_MULTICAST_ADDR_MASK;
+  }
+  
+  /* Enables or disables filtering on broadcast address */
+  if(pxPktStackAddresses->xFilterOnBroadcastAddress == S_ENABLE)
+  {
+    tempRegValue[0] |= PCKT_FLT_OPTIONS_DEST_VS_BROADCAST_ADDR_MASK;
+  }
+  else
+  {
+    tempRegValue[0] &= ~PCKT_FLT_OPTIONS_DEST_VS_BROADCAST_ADDR_MASK;
+  }
+  
+  /* Writes value on the register */
+  g_xStatus = SpiritSpiWriteRegisters(PCKT_FLT_OPTIONS_BASE, 1, &tempRegValue[0]);
+  
+  /* Fills array with the addresses passed in the structure */
+  tempRegValue[0] = pxPktStackAddresses->cBroadcastAddress;
+  tempRegValue[1] = pxPktStackAddresses->cMulticastAddress;
+  tempRegValue[2] = pxPktStackAddresses->cMyAddress;
+  
+  /* Writes them on the addresses registers */
+  g_xStatus = SpiritSpiWriteRegisters(PCKT_FLT_GOALS_BROADCAST_BASE, 3, tempRegValue);
+  
+}
+
+
+/**
+* @brief  Returns the SPIRIT STack packet addresses structure according to the specified
+*         parameters in the registers.
+* @param  pxPktStackAddresses STack packet addresses init structure.
+*         This parameter is a pointer to @ref PktStackAddresses.
+* @retval None.
+*/
+void SpiritPktStackGetAddressesInfo(PktStackAddressesInit* pxPktStackAddresses)
+{
+  uint8_t tempRegValue[3];
+  
+  /* Reads values on the PCKT_FLT_GOALS registers */
+  g_xStatus = SpiritSpiReadRegisters(PCKT_FLT_GOALS_BROADCAST_BASE, 3, tempRegValue);
+  
+  /* Fit the structure with the read addresses */
+  pxPktStackAddresses->cBroadcastAddress = tempRegValue[0];
+  pxPktStackAddresses->cMulticastAddress = tempRegValue[1];
+  pxPktStackAddresses->cMyAddress = tempRegValue[2];
+  
+  g_xStatus = SpiritSpiReadRegisters(PCKT_FLT_OPTIONS_BASE, 1, &tempRegValue[0]);
+  
+  /* Fit the structure with the read filtering bits */
+  pxPktStackAddresses->xFilterOnBroadcastAddress = (SpiritFunctionalState)((tempRegValue[0] >> 1) & 0x01);
+  pxPktStackAddresses->xFilterOnMulticastAddress = (SpiritFunctionalState)((tempRegValue[0] >> 2) & 0x01);
+  pxPktStackAddresses->xFilterOnMyAddress = (SpiritFunctionalState)((tempRegValue[0] >> 3) & 0x01);
+  
+}
+
+
+/**
+* @brief  Initializes the SPIRIT STack packet LLP options according to the specified
+*         parameters in the PktStackLlpInit struct.
+* @param  pxPktStackLlpInit STack packet LLP init structure.
+*         This parameter is a pointer to @ref PktStackLlpInit.
+* @retval None.
+*/
+void SpiritPktStackLlpInit(PktStackLlpInit* pxPktStackLlpInit)
+{
+  uint8_t tempRegValue[2];
+
+  /* Check the parameters */
+  s_assert_param(IS_SPIRIT_FUNCTIONAL_STATE(pxPktStackLlpInit->xPiggybacking));
+  s_assert_param(IS_SPIRIT_FUNCTIONAL_STATE(pxPktStackLlpInit->xAutoAck));
+  s_assert_param(IS_STACK_NMAX_RETX(pxPktStackLlpInit->xNMaxRetx));
+  /* check if piggybacking is enabled and autoack is disabled */
+  s_assert_param(!(pxPktStackLlpInit->xPiggybacking==S_ENABLE && pxPktStackLlpInit->xAutoAck==S_DISABLE));
+
+  /* Piggybacking mechanism setting on the PROTOCOL1 register */
+  g_xStatus = SpiritSpiReadRegisters(PROTOCOL1_BASE, 2, tempRegValue);
+  if(pxPktStackLlpInit->xPiggybacking == S_ENABLE)
+  {
+    tempRegValue[0] |= PROTOCOL1_PIGGYBACKING_MASK;
+  }
+  else
+  {
+    tempRegValue[0] &= ~PROTOCOL1_PIGGYBACKING_MASK;
+  }
+
+  /* RX and TX autoack mechanisms setting on the PROTOCOL0 register */
+  if(pxPktStackLlpInit->xAutoAck == S_ENABLE)
+  {
+    tempRegValue[1] |= PROTOCOL0_AUTO_ACK_MASK;
+  }
+  else
+  {
+    tempRegValue[1] &= ~PROTOCOL0_AUTO_ACK_MASK;
+  }
+
+  /* Max number of retransmission setting */
+  tempRegValue[1] &= ~PROTOCOL0_NMAX_RETX_MASK;
+  tempRegValue[1] |= pxPktStackLlpInit->xNMaxRetx;
+
+  /* Writes registers */
+  g_xStatus = SpiritSpiWriteRegisters(PROTOCOL1_BASE, 2, tempRegValue);
+
+}
+
+
+/**
+ * @brief  Returns the SPIRIT STack packet LLP options according to the specified
+ *         values in the registers.
+ * @param  pxPktStackLlpInit STack packet LLP structure.
+ *         This parameter is a pointer to @ref PktStackLlpInit.
+ * @retval None.
+ */
+void SpiritPktStackLlpGetInfo(PktStackLlpInit* pxPktStackLlpInit)
+{
+  uint8_t tempRegValue[2];
+
+  /* Piggybacking mechanism setting on the PROTOCOL1 register */
+  g_xStatus = SpiritSpiReadRegisters(PROTOCOL1_BASE, 2, tempRegValue);
+
+  /* Fit the structure with the read values */
+  pxPktStackLlpInit->xPiggybacking = (SpiritFunctionalState)((tempRegValue[0] >> 6) & 0x01);
+  pxPktStackLlpInit->xAutoAck = (SpiritFunctionalState)((tempRegValue[1] >> 2) & 0x01);
+  pxPktStackLlpInit->xNMaxRetx = (StackNMaxReTx)(tempRegValue[1] & PROTOCOL0_NMAX_RETX_MASK);
+
+}
+
+
+/**
+ * @brief  Configures the STack packet format for SPIRIT.
+ * @param  None.
+ * @retval None.
+ */
+void SpiritPktStackSetFormat(void)
+{
+  uint8_t tempRegValue;
+
+  /* Reads the PCKTCTRL3 register value */
+  g_xStatus = SpiritSpiReadRegisters(PCKTCTRL3_BASE, 1, &tempRegValue);
+
+  /* Build value to be written. Also set to 0 the direct RX mode bits */
+  tempRegValue &= 0x0F;
+  tempRegValue |= ((uint8_t)PCKTCTRL3_PCKT_FRMT_STACK);
+
+  /* Writes the value on the PCKTCTRL3 register. */
+  g_xStatus = SpiritSpiWriteRegisters(PCKTCTRL3_BASE, 1, &tempRegValue);
+
+  /* Reads the PCKTCTRL1 register value */
+  g_xStatus = SpiritSpiReadRegisters(PCKTCTRL1_BASE, 1, &tempRegValue);
+
+  /* Build the new value. Set to 0 the direct TX mode bits */
+  tempRegValue &= 0xF3;
+
+  /* Writes the PCKTCTRL1 value on register */
+  g_xStatus = SpiritSpiWriteRegisters(PCKTCTRL1_BASE, 1, &tempRegValue);
+
+  /* Reads the PROTOCOL1 register */
+  g_xStatus = SpiritSpiReadRegisters(PROTOCOL1_BASE, 1, &tempRegValue);
+
+  /* Mask a reserved bit */
+  tempRegValue &= ~0x20;
+
+  /* Writes the value on the PROTOCOL1 register */
+  g_xStatus = SpiritSpiWriteRegisters(PROTOCOL1_BASE, 1, &tempRegValue);
+
+}
+
+
+/**
+ * @brief  Sets the address length for SPIRIT STack packets (always 2).
+ * @param  None.
+ * @retval None.
+ */
+void SpiritPktStackSetAddressLength(void)
+{
+  uint8_t tempRegValue;
+
+  /* Reads the PCKTCTRL4 register value */
+  g_xStatus = SpiritSpiReadRegisters(PCKTCTRL4_BASE, 1, &tempRegValue);
+
+  /* Build the new value */
+  tempRegValue &= ~PCKTCTRL4_ADDRESS_LEN_MASK;
+  tempRegValue |= ((uint8_t)0x10);
+
+  /* Writes the value on the PCKTCTRL4 register */
+  g_xStatus = SpiritSpiWriteRegisters(PCKTCTRL4_BASE, 1, &tempRegValue);
+
+}
+
+
+/**
+ * @brief  Sets the payload length for SPIRIT STack packets. Since the packet length
+ *         depends from the address (always 2 for this packet format)
+ *         and the control field size, this function reads the control length register
+ *         content in order to determine the correct packet length to be written.
+ * @param  nPayloadLength payload length in bytes.
+ *         This parameter can be any value of uint16_t.
+ * @retval None.
+ */
+void SpiritPktStackSetPayloadLength(uint16_t nPayloadLength)
+{
+  uint8_t tempRegValue[2];
+
+  /* Computes the oversize (address + control) size */
+  uint16_t overSize = 2 + (uint16_t) SpiritPktStackGetControlLength();
+
+  /* Computes PCKTLEN0 value from lPayloadLength */
+  tempRegValue[1]=STACK_BUILD_PCKTLEN0(nPayloadLength+overSize);
+  /* Computes PCKTLEN1 value from lPayloadLength */
+  tempRegValue[0]=STACK_BUILD_PCKTLEN1(nPayloadLength+overSize);
+
+  /* Writes the value on the PCKTLENx registers */
+  g_xStatus = SpiritSpiWriteRegisters(PCKTLEN1_BASE, 2, tempRegValue);
+
+}
+
+
+/**
+ * @brief  Returns the payload length for SPIRIT STack packets. Since the
+ *         packet length depends from the address and the control
+ *         field size, this function reads the correspondent
+ *         registers in order to determine the correct payload length
+ *         to be returned.
+ * @param  None.
+ * @retval uint16_t Payload length.
+ */
+uint16_t SpiritPktStackGetPayloadLength(void)
+{
+  uint8_t tempRegValue[2];
+  /* Computes the oversize (address + control) size */
+  uint16_t overSize = 2 + (uint16_t) SpiritPktStackGetControlLength();
+
+  /* Reads the PCKTLEN1 registers value */
+  g_xStatus = SpiritSpiReadRegisters(PCKTLEN1_BASE, 2, tempRegValue);
+
+  /* Rebuild and return the payload length value */
+  return ((((uint16_t) tempRegValue[1])<<8) + (uint16_t) tempRegValue[0] - overSize);
+
+}
+
+
+/**
+ * @brief  Computes and sets the variable payload length for SPIRIT STack packets.
+ * @param  nMaxPayloadLength payload length in bytes.
+ *         This parameter is an uint16_t.
+ * @param  xControlLength control length in bytes.
+ *         This parameter can be any value of @ref StackControlLength.
+ * @retval None.
+ */
+void SpiritPktStackSetVarLengthWidth(uint16_t nMaxPayloadLength, StackControlLength xControlLength)
+{
+  uint8_t tempRegValue,
+          i;
+  uint32_t packetLength;
+
+
+  /* packet length = payload length + address length (2) + control length */
+  packetLength=nMaxPayloadLength+2+xControlLength;
+
+  /* Computes the number of bits */
+  for(i=0;i<16;i++)
+  {
+    if(packetLength == 0) 
+    {
+      break;
+    }
+    packetLength >>= 1;
+  }
+  i==0 ? i=1 : i;
+
+  /* Reads the PCKTCTRL3 register value */
+  g_xStatus = SpiritSpiReadRegisters(PCKTCTRL3_BASE, 1, &tempRegValue);
+
+  /* Build the register value */
+  tempRegValue &= ~PCKTCTRL3_LEN_WID_MASK;
+  tempRegValue |= ((uint8_t)(i-1));
+
+  /* Writes the PCKTCTRL3 register value */
+  g_xStatus = SpiritSpiWriteRegisters(PCKTCTRL3_BASE, 1, &tempRegValue);
+
+}
+
+
+/**
+ * @brief  Rx packet source mask. Used to mask the address of the accepted packets. If 0 -> no filtering.
+ * @param  cMask Rx source mask.
+ *         This parameter is an uint8_t.
+ * @retval None.
+ */
+void SpiritPktStackSetRxSourceMask(uint8_t cMask)
+{
+  /* Writes value on the register PCKT_FLT_GOALS_SOURCE_MASK */
+  g_xStatus = SpiritSpiWriteRegisters(PCKT_FLT_GOALS_SOURCE_MASK_BASE, 1, &cMask);
+
+}
+
+
+/**
+ * @brief  Returns the Rx packet source mask. Used to mask the address of the accepted packets. If 0 -> no filtering.
+ * @param  None.
+ * @retval uint8_t Rx source mask.
+ */
+uint8_t SpiritPktStackGetRxSourceMask(void)
+{
+  uint8_t tempRegValue;
+
+  /* Writes value on the PCKT_FLT_GOALS_SOURCE_MASK register */
+  g_xStatus = SpiritSpiReadRegisters(PCKT_FLT_GOALS_SOURCE_MASK_BASE, 1, &tempRegValue);
+
+  /* Return the read value */
+  return tempRegValue;
+
+}
+
+/**
+ * @brief  Returns the packet length field of the received packet.
+ * @param  None.
+ * @retval uint16_t Packet length.
+ */
+uint16_t SpiritPktStackGetReceivedPktLength(void)
+{
+  uint8_t tempRegValue[2];
+  uint16_t tempLength;
+  
+  /* Reads the RX_PCKT_LENx registers value */
+  g_xStatus = SpiritSpiReadRegisters(RX_PCKT_LEN1_BASE, 2, tempRegValue);
+
+  /* Rebuild and return the the length field */
+  tempLength = ((((uint16_t) tempRegValue[0]) << 8) + (uint16_t) tempRegValue[1]);
+  
+  /* Computes the oversize (address + control) size */
+  tempLength -= 2 + (uint16_t) SpiritPktStackGetControlLength();
+  
+  return tempLength;
+
+}
+
+
+/**
+ * @brief  If enabled RX packet is accepted only if the masked source address field matches the
+ *         masked source address field reference (SOURCE_MASK & SOURCE_FIELD_REF == SOURCE_MASK & RX_SOURCE_FIELD).
+ * @param  xNewState new state for Source address filtering enable bit.
+ *         This parameter can be S_ENABLE or S_DISABLE.
+ * @retval None.
+ * @note   This filtering control is enabled by default but the source address mask is by default set to 0.
+ *         As a matter of fact the user has to enable the source filtering bit after the packet initialization
+ *         because the PktInit routine disables it.
+ */
+void SpiritPktStackFilterOnSourceAddress(SpiritFunctionalState xNewState)
+{
+  uint8_t tempRegValue;
+
+   /* Check the parameters */
+  s_assert_param(IS_SPIRIT_FUNCTIONAL_STATE(xNewState));
+
+
+  /* Modify the register value: set or reset the source bit filtering */
+  g_xStatus = SpiritSpiReadRegisters(PCKT_FLT_OPTIONS_BASE, 1, &tempRegValue);
+
+  /* Set or reset the SOURCE ADDRESS filtering enabling bit */
+  if(xNewState == S_ENABLE)
+  {
+    tempRegValue |= PCKT_FLT_OPTIONS_SOURCE_FILTERING_MASK;
+  }
+  else
+  {
+    tempRegValue &= ~PCKT_FLT_OPTIONS_SOURCE_FILTERING_MASK;
+  }
+
+  /* Writes the new value on the PCKT_FLT_OPTIONS register */
+  g_xStatus = SpiritSpiWriteRegisters(PCKT_FLT_OPTIONS_BASE, 1, &tempRegValue);
+
+}
+
+/**
+ *@}
+ */
+
+/**
+ *@}
+ */
+
+
+/**
+ *@}
+ */
+
+
+
+/******************* (C) COPYRIGHT 2015 STMicroelectronics *****END OF FILE****/