Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.

Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo

Currently supported boards:

Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:

  • Unmount resistor R4
  • Mount resistor R7

Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!

This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).

Revision:
34:edda6a7238ec
Child:
67:93bec0baf1de
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/source/libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_Timer.h	Tue Nov 22 11:40:10 2016 +0100
@@ -0,0 +1,239 @@
+/**
+  ******************************************************************************
+ * @file    SPIRIT_Timer.h
+  * @author  VMA division - AMS
+  * @version 3.2.2
+  * @date    08-July-2015
+  * @brief   Configuration and management of SPIRIT timers.
+ * @details
+ *
+ * This module provides API to configure the Spirit timing mechanisms.
+ * They allow the user to set the timer registers using raw values or
+ * compute them since the desired timer value is expressed in ms.
+ * Moreover the management of the Spirit LDCR mode can be done using
+ * these API.
+ *
+ * <b>Example:</b>
+ * @code
+ *   ...
+ *
+ *   SpiritTimerSetRxTimeoutMs(50.0);
+ *   SpiritTimerSetWakeUpTimerMs(150.0);
+ *
+ *   // IRQ configuration for RX_TIMEOUT and WAKEUP_TIMEOUT
+ *   ...
+ *
+ *   SpiritTimerLdcrMode(S_ENABLE);
+ *
+ *   ...
+ *
+ * @endcode
+ *
+ *
+  * @attention
+ *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __SPIRIT1_TIMER_H
+#define __SPIRIT1_TIMER_H
+
+
+/* Includes ------------------------------------------------------------------*/
+
+#include "SPIRIT_Regs.h"
+#include "SPIRIT_Types.h"
+
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+
+/**
+ * @addtogroup SPIRIT_Libraries
+ * @{
+ */
+
+
+/**
+ * @defgroup SPIRIT_Timer               Timer
+ * @brief Configuration and management of SPIRIT Timers.
+ * @details See the file <i>@ref SPIRIT_Timer.h</i> for more details.
+ * @{
+ */
+
+
+/**
+ * @defgroup Timer_Exported_Types       Timer Exported Types
+ * @{
+ */
+
+/**
+ * @brief  All the possible RX timeout stop conditions enumeration.
+ */
+typedef enum{
+
+     NO_TIMEOUT_STOP = 0x00,                /*!< Timeout never stopped */
+     TIMEOUT_ALWAYS_STOPPED = 0x08,         /*!< Timeout always stopped (default) */
+     RSSI_ABOVE_THRESHOLD = 0x04,           /*!< Timeout stopped on RSSI above threshold */
+     SQI_ABOVE_THRESHOLD = 0x02,            /*!< Timeout stopped on SQI above threshold */
+     PQI_ABOVE_THRESHOLD = 0x01,            /*!< Timeout stopped on PQI above threshold */
+     RSSI_AND_SQI_ABOVE_THRESHOLD = 0x06,   /*!< Timeout stopped on both RSSI and SQI above threshold */
+     RSSI_AND_PQI_ABOVE_THRESHOLD = 0x05,   /*!< Timeout stopped on both RSSI and PQI above threshold */
+     SQI_AND_PQI_ABOVE_THRESHOLD = 0x03,    /*!< Timeout stopped on both SQI and PQI above threshold */
+     ALL_ABOVE_THRESHOLD = 0x07,            /*!< Timeout stopped only if RSSI, SQI and PQI are above threshold */
+     RSSI_OR_SQI_ABOVE_THRESHOLD = 0x0E,    /*!< Timeout stopped if one between RSSI or SQI are above threshold */
+     RSSI_OR_PQI_ABOVE_THRESHOLD = 0x0D,    /*!< Timeout stopped if one between RSSI or PQI are above threshold */
+     SQI_OR_PQI_ABOVE_THRESHOLD = 0x0B,     /*!< Timeout stopped if one between SQI or PQI are above threshold */
+     ANY_ABOVE_THRESHOLD = 0x0F             /*!< Timeout stopped if one among RSSI, SQI or SQI are above threshold */
+
+} RxTimeoutStopCondition;
+
+
+#define IS_RX_TIMEOUT_STOP_CONDITION(COND)  ( COND == NO_TIMEOUT_STOP || \
+                                                COND == TIMEOUT_ALWAYS_STOPPED || \
+                                                COND == RSSI_ABOVE_THRESHOLD || \
+                                                COND == SQI_ABOVE_THRESHOLD || \
+                                                COND == PQI_ABOVE_THRESHOLD || \
+                                                COND == RSSI_AND_SQI_ABOVE_THRESHOLD || \
+                                                COND == RSSI_AND_PQI_ABOVE_THRESHOLD || \
+                                                COND == SQI_AND_PQI_ABOVE_THRESHOLD || \
+                                                COND == ALL_ABOVE_THRESHOLD || \
+                                                COND == RSSI_OR_SQI_ABOVE_THRESHOLD || \
+                                                COND == RSSI_OR_PQI_ABOVE_THRESHOLD || \
+                                                COND == SQI_OR_PQI_ABOVE_THRESHOLD || \
+                                                COND == ANY_ABOVE_THRESHOLD )
+
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @defgroup Timer_Exported_Constants   Timer Exported Constants
+ * @{
+ */
+
+/**
+ * @brief  It represents the Time Step for RX_Timeout timer in case of 24 MHz Crystal, expressed in us.
+ *         It is equal to 1210/(24*10^6). With this time step it is possible to fix the RX_Timeout to
+ *         a minimum value of 50.417us to a maximum value of about 3.278 s.
+ *         Remember that it is possible to have infinite RX_Timeout writing 0 in the RX_Timeout_Counter and/or RX_Timeout_Prescaler registers.
+ */
+#define      RX_TCLK_24MHz           50.417f
+#define      IS_RX_TIMEOUT_24MHz(TIMEOUT)        (TIMEOUT*1000)>=RX_TCLK_24MHz
+
+/**
+ * @brief  It represents the Time Step for RX_Timeout timer in case of 26 MHz Crystal, expressed in us.
+ *         It is equal to 1210/(26*10^6). With this time step it is possible to fix the RX_Timeout to
+ *         a minimum value of 46.538us to a maximum value of about 3.026 s.
+ *         Remember that it is possible to have infinite RX_Timeout writing 0 in the RX_Timeout_Counter register.
+ */
+#define      RX_TCLK_26MHz           46.538f
+#define      IS_RX_TIMEOUT_26MHz(TIMEOUT)        (TIMEOUT*1000)>=RX_TCLK_26MHz
+
+/**
+ * @brief  It represents the Time Step for RX_Wakeup timer expressed in us. This timer is based on RCO (about 34.7 kHZ).
+ *         With this time step it is possible to fix the Wakeup_Timeout to a minimum value of 28.818us to a maximum
+ *         value of about 1.888 s.
+ */
+#define      WAKEUP_TCLK            28.818f
+#define      IS_WKUP_TIMEOUT(TIMEOUT)        (TIMEOUT*1000)>=WAKEUP_TCLK
+
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @defgroup Timer_Exported_Macros              Timer Exported Macros
+ * @{
+ */
+
+#define SET_INFINITE_RX_TIMEOUT()     SpiritTimerSetRxTimeoutCounter(0)
+
+/**
+ * @}
+ */
+
+
+/**
+ * @defgroup Timer_Exported_Functions           Timer Exported Functions
+ * @{
+ */
+
+void SpiritTimerLdcrMode(SpiritFunctionalState xNewState);
+void SpiritTimerLdcrAutoReload(SpiritFunctionalState xNewState);
+SpiritFunctionalState SpiritTimerLdcrGetAutoReload(void);
+void SpiritTimerSetRxTimeout(uint8_t cCounter , uint8_t cPrescaler);
+void SpiritTimerSetRxTimeoutMs(float fDesiredMsec);
+void SpiritTimerSetRxTimeoutCounter(uint8_t cCounter);
+void SpiritTimerSetRxTimeoutPrescaler(uint8_t cPrescaler);
+void SpiritTimerGetRxTimeout(float* pfTimeoutMsec, uint8_t* pcCounter , uint8_t* pcPrescaler);
+void SpiritTimerSetWakeUpTimer(uint8_t cCounter , uint8_t cPrescaler);
+void SpiritTimerSetWakeUpTimerMs(float fDesiredMsec);
+void SpiritTimerSetWakeUpTimerCounter(uint8_t cCounter);
+void SpiritTimerSetWakeUpTimerPrescaler(uint8_t cPrescaler);
+void SpiritTimerSetWakeUpTimerReloadMs(float fDesiredMsec);
+void SpiritTimerGetWakeUpTimer(float* pfWakeUpMsec, uint8_t* pcCounter , uint8_t* pcPrescaler);
+void SpiritTimerSetWakeUpTimerReload(uint8_t cCounter , uint8_t cPrescaler);
+void SpiritTimerSetWakeUpTimerReloadCounter(uint8_t cCounter);
+void SpiritTimerSetWakeUpTimerReloadPrescaler(uint8_t cPrescaler);
+void SpiritTimerGetWakeUpTimerReload(float* pfWakeUpReloadMsec, uint8_t* pcCounter , uint8_t* pcPrescaler);
+void SpiritTimerComputeWakeUpValues(float fDesiredMsec , uint8_t* pcCounter , uint8_t* pcPrescaler);
+void SpiritTimerComputeRxTimeoutValues(float fDesiredMsec , uint8_t* pcCounter , uint8_t* pcPrescaler);
+void SpiritTimerSetRxTimeoutStopCondition(RxTimeoutStopCondition xStopCondition);
+void SpiritTimerReloadStrobe(void);
+uint16_t SpiritTimerGetRcoFrequency(void);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+/******************* (C) COPYRIGHT 2015 STMicroelectronics *****END OF FILE****/
+