Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.
Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo
Currently supported boards:
Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:
- Unmount resistor
R4 - Mount resistor
R7
Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!
This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).
Diff: source/libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_PktBasic.h
- Revision:
- 34:edda6a7238ec
- Child:
- 67:93bec0baf1de
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/source/libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_PktBasic.h Tue Nov 22 11:40:10 2016 +0100
@@ -0,0 +1,696 @@
+/**
+ ******************************************************************************
+ * @file SPIRIT_PktBasic.h
+ * @author VMA division - AMS
+ * @version 3.2.2
+ * @date 08-July-2015
+ * @brief Configuration and management of SPIRIT Basic packets.
+ *
+ * @details
+ *
+ * This module can be used to manage the configuration of Spirit Basic
+ * packets.
+ * The user can obtain a packet configuration filling the structure
+ * <i>@ref PktBasicInit</i>, defining in it some general parameters
+ * for the Spirit Basic packet format.
+ * Another structure the user can fill is <i>@ref PktBasicAddressesInit</i>
+ * to define the addresses which will be used during the communication.
+ * Moreover, functions to set the payload length and the destination address
+ * are provided.
+ *
+ * <b>Example:</b>
+ * @code
+ *
+ * PktBasicInit basicInit={
+ * PKT_PREAMBLE_LENGTH_08BYTES, // preamble length in bytes
+ * PKT_SYNC_LENGTH_4BYTES, // sync word length in bytes
+ * 0x1A2635A8, // sync word
+ * PKT_LENGTH_VAR, // variable or fixed payload length
+ * 7, // length field width in bits (used only for variable length)
+ * PKT_NO_CRC, // CRC mode
+ * PKT_CONTROL_LENGTH_0BYTES, // control field length
+ * S_ENABLE, // address field
+ * S_DISABLE, // FEC
+ * S_ENABLE // whitening
+ * };
+ *
+ * PktBasicAddressesInit addressInit={
+ * S_ENABLE, // enable/disable filtering on my address
+ * 0x34, // my address (address of the current node)
+ * S_DISABLE, // enable/disable filtering on multicast address
+ * 0xEE, // multicast address
+ * S_DISABLE, // enable/disable filtering on broadcast address
+ * 0xFF // broadcast address
+ * };
+ *
+ * ...
+ *
+ * SpiritPktBasicInit(&basicInit);
+ * SpiritPktBasicAddressesInit(&addressInit);
+ *
+ * ...
+ *
+ * SpiritPktBasicSetPayloadLength(20);
+ * SpiritPktBasicSetDestinationAddress(0x44);
+ *
+ * ...
+ *
+ * @endcode
+ *
+ * The module provides some other functions that can be used to modify
+ * or read only some configuration parameters.
+ *
+ *
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __SPIRIT_PKT_BASIC_H
+#define __SPIRIT_PKT_BASIC_H
+
+/* Includes ------------------------------------------------------------------*/
+
+#include "SPIRIT_Regs.h"
+#include "SPIRIT_Types.h"
+#include "SPIRIT_PktCommon.h"
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+
+
+/**
+ * @addtogroup SPIRIT_Libraries
+ * @{
+ */
+
+
+/**
+ * @defgroup SPIRIT_PktBasic Pkt Basic
+ * @brief Configuration and management of SPIRIT Basic packets.
+ * @details See the file <i>@ref SPIRIT_PktBasic.h</i> for more details.
+ * @{
+ */
+
+/**
+ * @defgroup PktBasic_Exported_Types Pkt Basic Exported Types
+ * @{
+ */
+
+
+/**
+ * @brief Preamble length in bytes enumeration.
+ */
+typedef PktPreambleLength BasicPreambleLength;
+
+#define IS_BASIC_PREAMBLE_LENGTH IS_PKT_PREAMBLE_LENGTH
+
+/**
+ * @brief Sync length in bytes enumeration.
+ */
+typedef PktSyncLength BasicSyncLength;
+
+#define IS_BASIC_SYNC_LENGTH IS_PKT_SYNC_LENGTH
+
+
+
+/**
+ * @brief CRC length in bytes enumeration.
+ */
+typedef PktCrcMode BasicCrcMode;
+
+#define IS_BASIC_CRC_MODE IS_PKT_CRC_MODE
+
+
+/**
+ * @brief Fixed or variable payload length enumeration.
+ */
+typedef PktFixVarLength BasicFixVarLength;
+
+#define IS_BASIC_FIX_VAR_LENGTH IS_PKT_FIX_VAR_LENGTH
+
+/**
+ * @brief Control length in bytes enumeration.
+ */
+typedef PktControlLength BasicControlLength;
+
+#define IS_BASIC_CONTROL_LENGTH IS_PKT_CONTROL_LENGTH
+
+/**
+ * @brief Sync words enumeration.
+ */
+typedef PktSyncX BasicSyncX;
+
+#define IS_BASIC_SYNCx IS_PKT_SYNCx
+
+
+/**
+ * @brief SPIRIT Basic Packet Init structure definition. This structure allows users to set the main options
+ * for the Basic packet.
+ */
+typedef struct
+{
+
+ BasicPreambleLength xPreambleLength; /*!< Specifies the preamble length.
+ This parameter can be any value of @ref BasicPreambleLength */
+ BasicSyncLength xSyncLength; /*!< Specifies the sync word length. The 32bit word passed (lSyncWords) will be stored in the SYNCx registers from the MSb
+ until the number of bytes in xSyncLength has been stored.
+ This parameter can be any value of @ref BasicSyncLength */
+ uint32_t lSyncWords; /*!< Specifies the sync words.
+ This parameter is a uint32_t word with format: 0x|SYNC1|SYNC2|SYNC3|SYNC4| */
+ BasicFixVarLength xFixVarLength; /*!< Specifies if a fixed length of packet has to be used.
+ This parameter can be any value of @ref BasicFixVarLength */
+ uint8_t cPktLengthWidth; /*!< Specifies the size of the length of packet in bits. This field is useful only if
+ the field xFixVarLength is set to BASIC_LENGTH_VAR. For Basic packets the length width
+ is log2( max payload length + control length (0 to 4) + address length (0 or 1)).
+ This parameter is an uint8_t */
+ BasicCrcMode xCrcMode; /*!< Specifies the CRC word length of packet.
+ This parameter can be any value of @ref BasicCrcMode */
+ BasicControlLength xControlLength; /*!< Specifies the length of a control field to be sent.
+ This parameter can be any value of @ref BasicControlLength */
+ SpiritFunctionalState xAddressField; /*!< Specifies if the destination address has to be sent.
+ This parameter can be S_ENABLE or S_DISABLE */
+ SpiritFunctionalState xFec; /*!< Specifies if FEC has to be enabled.
+ This parameter can be S_ENABLE or S_DISABLE */
+ SpiritFunctionalState xDataWhitening; /*!< Specifies if data whitening has to be enabled.
+ This parameter can be S_ENABLE or S_DISABLE */
+}PktBasicInit;
+
+
+/**
+ * @brief SPIRIT Basic Packet address structure definition. This structure allows users to specify
+ * the node/multicast/broadcast addresses and the correspondent filtering options.
+ */
+typedef struct
+{
+
+ SpiritFunctionalState xFilterOnMyAddress; /*!< If set RX packet is accepted if its destination address matches with cMyAddress.
+ This parameter can be S_ENABLE or S_DISABLE */
+ uint8_t cMyAddress; /*!< Specifies the TX packet source address (address of this node).
+ This parameter is an uint8_t */
+ SpiritFunctionalState xFilterOnMulticastAddress; /*!< If set RX packet is accepted if its destination address matches with cMulticastAddress.
+ This parameter can be S_ENABLE or S_DISABLE */
+ uint8_t cMulticastAddress; /*!< Specifies the Multicast group address for this node.
+ This parameter is an uint8_t */
+ SpiritFunctionalState xFilterOnBroadcastAddress; /*!< If set RX packet is accepted if its destination address matches with cBroadcastAddress.
+ This parameter can be S_ENABLE or S_DISABLE */
+ uint8_t cBroadcastAddress; /*!< Specifies the Broadcast address for this node.
+ This parameter is an uint8_t */
+}PktBasicAddressesInit;
+
+/**
+ *@}
+ */
+
+
+/**
+ * @defgroup PktBasic_Exported_Constants Pkt Basic Exported Constants
+ * @{
+ */
+
+#define IS_BASIC_LENGTH_WIDTH_BITS IS_PKT_LENGTH_WIDTH_BITS
+
+
+/**
+ *@}
+ */
+
+
+/**
+ * @defgroup PktBasic_Exported_Macros Pkt Basic Exported Macros
+ * @{
+ */
+
+/**
+ * @brief Macro used to compute per lower part of the packet length
+ * for Spirit Basic packets, to write in the PCKTLEN0 register.
+ * @param nLength Length of the packet payload.
+ * This parameter is an uint16_t.
+ * @retval None.
+ */
+#define BASIC_BUILD_PCKTLEN0(nLength) BUILD_PCKTLEN0(nLength)
+
+
+/**
+ * @brief Macro used to compute per upper part of the packet length
+ * for Spirit Basic packets, to write the PCKTLEN1 register.
+ * @param nLengthLength of the packet payload.
+ * This parameter is an uint16_t.
+ * @retval None.
+ */
+#define BASIC_BUILD_PCKTLEN1(nLength) BUILD_PCKTLEN1(nLength)
+
+/**
+ * @brief Sets the CONTROL field length for SPIRIT Basic packets.
+ * @param xControlLength length of CONTROL field in bytes.
+ * This parameter can be any value of @ref PktControlLength.
+ * @retval None.
+ */
+#define SpiritPktBasicSetControlLength(xControlLength) SpiritPktCommonSetControlLength(xControlLength)
+
+
+/**
+ * @brief Returns the CONTROL field length for SPIRIT Basic packets.
+ * @param None.
+ * @retval uint8_t Control field length.
+ */
+#define SpiritPktBasicGetControlLength() SpiritPktCommonGetControlLength()
+
+
+/**
+ * @brief Sets the PREAMBLE field length for SPIRIT Basic packets.
+ * @param xPreambleLength length of PREAMBLE field in bytes.
+ * This parameter can be any value of @ref BasicPreambleLength.
+ * @retval None.
+ */
+#define SpiritPktBasicSetPreambleLength(xPreambleLength) SpiritPktCommonSetPreambleLength((PktPreambleLength)xPreambleLength)
+
+
+/**
+ * @brief Returns the PREAMBLE field length mode for SPIRIT Basic packets.
+ * @param None.
+ * @retval uint8_t Preamble field length in bytes.
+ */
+#define SpiritPktBasicGetPreambleLength() SpiritPktCommonGetPreambleLength()
+
+
+/**
+ * @brief Sets the SYNC field length for SPIRIT Basic packets.
+ * @param xSyncLength length of SYNC field in bytes.
+ * This parameter can be any value of @ref BasicSyncLength.
+ * @retval None.
+ */
+#define SpiritPktBasicSetSyncLength(xSyncLength) SpiritPktCommonSetSyncLength((PktSyncLength)xSyncLength)
+
+
+/**
+ * @brief Returns the SYNC field length for SPIRIT Basic packets.
+ * @param None.
+ * @retval uint8_t SYNC field length in bytes.
+ */
+#define SpiritPktBasicGetSyncLength() SpiritPktCommonGetSyncLength()
+
+
+/**
+ * @brief Sets fixed or variable payload length mode for SPIRIT packets.
+ * @param xFixVarLength variable or fixed length.
+ * BASIC_FIXED_LENGTH_VAR -> variable (the length is extracted from the received packet).
+ * BASIC_FIXED_LENGTH_FIX -> fix (the length is set by PCKTLEN0 and PCKTLEN1).
+ * @retval None.
+ */
+#define SpiritPktBasicSetFixVarLength(xFixVarLength) SpiritPktCommonSetFixVarLength((PktFixVarLength)xFixVarLength)
+
+
+/**
+ * @brief Enables or Disables the CRC filtering.
+ * @param xNewState new state for CRC_CHECK.
+ * This parameter can be S_ENABLE or S_DISABLE.
+ * @retval None.
+ */
+#define SpiritPktBasicFilterOnCrc(xNewState) SpiritPktCommonFilterOnCrc(xNewState)
+
+
+/**
+ * @brief Returns the CRC filtering bit.
+ * @param None.
+ * @retval SpiritFunctionalState This parameter can be S_ENABLE or S_DISABLE.
+ */
+#define SpiritPktBasicGetFilterOnCrc() SpiritPktCommonGetFilterOnCrc()
+
+
+/**
+ * @brief Sets the CRC mode for SPIRIT Basic packets.
+ * @param xCrcMode CRC mode.
+ * This parameter can be any value of @ref BasicCrcMode.
+ * @retval None.
+ */
+#define SpiritPktBasicSetCrcMode(xCrcMode) SpiritPktCommonSetCrcMode((PktCrcMode)xCrcMode)
+
+
+/**
+ * @brief Returns the CRC mode for SPIRIT Basic packets.
+ * @param None.
+ * @retval BasicCrcMode Crc mode.
+ */
+#define SpiritPktBasicGetCrcMode() (BasicCrcMode)SpiritPktCommonGetCrcMode()
+
+
+/**
+ * @brief Enables or Disables WHITENING for SPIRIT packets.
+ * @param xNewState new state for WHITENING mode.
+ * This parameter can be S_ENABLE or S_DISABLE.
+ * @retval None.
+ */
+#define SpiritPktBasicWhitening(xNewState) SpiritPktCommonWhitening(xNewState)
+
+
+/**
+ * @brief Enables or Disables FEC for SPIRIT Basic packets.
+ * @param xNewState new state for FEC mode.
+ * This parameter can be S_ENABLE or S_DISABLE.
+ * @retval None.
+ */
+#define SpiritPktBasicFec(xNewState) SpiritPktCommonFec(xNewState)
+
+
+/**
+ * @brief Sets a specific SYNC word for SPIRIT Basic packets.
+ * @param xSyncX SYNC word number to be set.
+ * This parameter can be any value of @ref BasicSyncX.
+ * @param cSyncWord SYNC word.
+ * This parameter is an uint8_t.
+ * @retval None.
+ */
+#define SpiritPktBasicSetSyncxWord(xSyncX, cSyncWord) SpiritPktCommonSetSyncxWord((PktSyncX)xSyncX, cSyncWord)
+
+
+/**
+ * @brief Returns a specific SYNC words for SPIRIT Basic packets.
+ * @param xSyncX SYNC word number to be get.
+ * This parameter can be any value of @ref BasicSyncX.
+ * @retval uint8_t Sync word x.
+ */
+#define SpiritPktBasicGetSyncxWord(xSyncX) SpiritPktCommonGetSyncxWord(xSyncX)
+
+
+/**
+ * @brief Sets multiple SYNC words for SPIRIT Basic packets.
+ * @param lSyncWords SYNC words to be set with format: 0x|SYNC1|SYNC2|SYNC3|SYNC4|.
+ * This parameter is a uint32_t.
+ * @param xSyncLength SYNC length in bytes. The 32bit word passed will be stored in the SYNCx registers from the MSb
+ * until the number of bytes in xSyncLength has been stored.
+ * This parameter is a @ref BasicSyncLength.
+ * @retval None.
+ */
+#define SpiritPktBasicSetSyncWords(lSyncWords, xSyncLength) SpiritPktCommonSetSyncWords(lSyncWords, (PktSyncLength)xSyncLength)
+
+
+/**
+ * @brief Returns multiple SYNC words for SPIRIT Basic packets.
+ * @param xSyncLength SYNC length in bytes. The 32bit word passed will be stored in the SYNCx registers from the MSb
+ * until the number of bytes in xSyncLength has been stored.
+ * This parameter is a pointer to @ref BasicSyncLength.
+ * @retval uint32_t Sync words. The format of the read 32 bit word is 0x|SYNC1|SYNC2|SYNC3|SYNC4|.
+ */
+#define SpiritPktBasicGetSyncWords(xSyncLength) SpiritPktCommonGetSyncWords((PktSyncLength)xSyncLength)
+
+
+/**
+ * @brief Returns the SPIRIT variable length width (in number of bits).
+ * @param None.
+ * @retval Variable length width in bits.
+ */
+#define SpiritPktBasicGetVarLengthWidth() SpiritPktCommonGetVarLengthWidth()
+
+
+/**
+ * @brief Sets the destination address for the Tx packet.
+ * @param cAddress destination address.
+ * This parameter is an uint8_t.
+ * @retval None.
+ */
+#define SpiritPktBasicSetDestinationAddress(cAddress) SpiritPktCommonSetDestinationAddress(cAddress)
+
+
+/**
+ * @brief Returns the settled destination address.
+ * @param None.
+ * @retval uint8_t Transmitted destination address.
+ */
+#define SpiritPktBasicGetTransmittedDestAddress() SpiritPktCommonGetTransmittedDestAddress()
+
+
+/**
+ * @brief Sets the node address. When the filtering on my address is on, if the destination address extracted from the received packet is equal to the content of the
+ * my address, then the packet is accepted (this is the address of the node).
+ * @param cAddress Address of the present node.
+ * This parameter is an uint8_t.
+ * @retval None.
+ */
+#define SpiritPktBasicSetMyAddress(cAddress) SpiritPktCommonSetMyAddress(cAddress)
+
+
+/**
+ * @brief Returns the address of the present node.
+ * @param None.
+ * @retval uint8_t My address (address of this node).
+ */
+#define SpiritPktBasicGetMyAddress() SpiritPktCommonGetMyAddress()
+
+
+/**
+ * @brief Sets the broadcast address. When the broadcast filtering is on, if the destination address extracted from the received packet is equal to the content of the
+ * BROADCAST_ADDR register, then the packet is accepted.
+ * @param cAddress Broadcast address.
+ * This parameter is an uint8_t.
+ * @retval None.
+ */
+#define SpiritPktBasicSetBroadcastAddress(cAddress) SpiritPktCommonSetBroadcastAddress(cAddress)
+
+
+/**
+ * @brief Returns the broadcast address.
+ * @param None.
+ * @retval uint8_t Broadcast address.
+ */
+#define SpiritPktBasicGetBroadcastAddress() SpiritPktCommonGetBroadcastAddress()
+
+
+/**
+ * @brief Sets the multicast address. When the multicast filtering is on, if the destination address extracted from the received packet is equal to the content of the
+ * MULTICAST_ADDR register, then the packet is accepted.
+ * @param cAddress Multicast address.
+ * This parameter is an uint8_t.
+ * @retval None.
+ */
+#define SpiritPktBasicSetMulticastAddress(cAddress) SpiritPktCommonSetMulticastAddress(cAddress)
+
+
+/**
+ * @brief Returns the multicast address.
+ * @param None.
+ * @retval uint8_t Multicast address.
+ */
+#define SpiritPktBasicGetMulticastAddress() SpiritPktCommonGetMulticastAddress()
+
+
+/**
+ * @brief Sets the control mask. The 1 bits of the CONTROL_MASK indicate the
+ * bits to be used in filtering. (All 0s no filtering)
+ * @param lMask Control mask.
+ * This parameter is an uint32_t.
+ * @retval None.
+ */
+#define SpiritPktBasicSetCtrlMask(lMask) SpiritPktCommonSetCtrlMask(lMask)
+
+
+/**
+ * @brief Returns the control mask. The 1 bits of the CONTROL_MASK indicate the
+ * bits to be used in filtering. (All 0s no filtering)
+ * @param None.
+ * @retval uint32_t Control mask.
+ */
+#define SpiritPktBasicGetCtrlMask() SpiritPktCommonGetCtrlMask()
+
+
+/**
+ * @brief Sets the control field reference. If the bits enabled by the
+ * CONTROL_MASK match the ones of the control fields extracted from the received packet
+ * then the packet is accepted.
+ * @param lReference Control reference.
+ * This parameter is an uint32_t.
+ * @retval None.
+ */
+#define SpiritPktBasicSetCtrlReference(lReference) SpiritPktCommonSetCtrlReference(lReference)
+
+
+/**
+ * @brief Returns the control field reference.
+ * @param None.
+ * @retval uint32_t Control reference.
+ */
+#define SpiritPktBasicGetCtrlReference() SpiritPktCommonGetCtrlReference()
+
+
+/**
+ * @brief Sets the TX control field.
+ * @param lField Tx control field.
+ * This parameter is an uint32_t.
+ * @retval None.
+ */
+#define SpiritPktBasicSetTransmittedCtrlField(lField) SpiritPktCommonSetTransmittedCtrlField(lField)
+
+
+/**
+ * @brief Returns the TX control field.
+ * @param None.
+ * @retval uint32_t Control field of the transmitted packet.
+ */
+#define SpiritPktBasicGetTransmittedCtrlField() SpiritPktCommonGetTransmittedCtrlField()
+
+
+/**
+ * @brief If enabled RX packet is accepted if its destination address matches with My address.
+ * @param xNewState new state for DEST_VS_SOURCE_ADDRESS.
+ * This parameter can be S_ENABLE or S_DISABLE.
+ * @retval None.
+ */
+#define SpiritPktBasicFilterOnMyAddress(xNewState) SpiritPktCommonFilterOnMyAddress(xNewState)
+
+
+/**
+ * @brief If enabled RX packet is accepted if its destination address matches with multicast address.
+ * @param xNewState new state for DEST_VS_MULTICAST_ADDRESS.
+ * This parameter can be S_ENABLE or S_DISABLE.
+ * @retval None.
+ */
+#define SpiritPktBasicFilterOnMulticastAddress(xNewState) SpiritPktCommonFilterOnMulticastAddress(xNewState)
+
+
+/**
+ * @brief If enabled RX packet is accepted if its destination address matches with broadcast address.
+ * @param xNewState new state for DEST_VS_BROADCAST_ADDRESS.
+ * This parameter can be S_ENABLE or S_DISABLE.
+ * @retval None.
+ */
+#define SpiritPktBasicFilterOnBroadcastAddress(xNewState) SpiritPktCommonFilterOnBroadcastAddress(xNewState)
+
+
+/**
+ * @brief Returns the enable bit of the my address filtering.
+ * @param None.
+ * @retval SpiritFunctionalState This parameter can be S_ENABLE or S_DISABLE.
+ */
+#define SpiritPktBasicGetFilterOnMyAddress() SpiritPktCommonGetFilterOnMyAddress();
+
+
+/**
+ * @brief Returns the enable bit of the multicast address filtering.
+ * @param None.
+ * @retval SpiritFunctionalState This parameter can be S_ENABLE or S_DISABLE.
+ */
+#define SpiritPktBasicGetFilterOnMulticastAddress() SpiritPktCommonGetFilterOnMulticastAddress();
+
+
+/**
+ * @brief Returns the enable bit of the broadcast address filtering.
+ * @param None.
+ * @retval SpiritFunctionalState This parameter can be S_ENABLE or S_DISABLE.
+ */
+#define SpiritPktBasicGetFilterOnBroadcastAddress() SpiritPktCommonGetFilterOnBroadcastAddress();
+
+
+/**
+ * @brief Returns the destination address of the received packet.
+ * @param None.
+ * @retval uint8_t Destination address of the received packet.
+ */
+#define SpiritPktBasicGetReceivedDestAddress() SpiritPktCommonGetReceivedDestAddress()
+
+
+/**
+ * @brief Returns the control field of the received packet.
+ * @param None.
+ * @retval uint32_t Received control field.
+ */
+#define SpiritPktBasicGetReceivedCtrlField() SpiritPktCommonGetReceivedCtrlField()
+
+
+/**
+ * @brief Returns the CRC field of the received packet.
+ * @param cCrcFieldVect array in which the CRC field has to be stored.
+ * This parameter is an uint8_t array of 3 elements.
+ * @retval None.
+ */
+#define SpiritPktBasicGetReceivedCrcField(cCrcFieldVect) SpiritPktCommonGetReceivedCrcField(cCrcFieldVect)
+
+
+/**
+ * @brief If enabled RX packet is accepted only if the masked control field matches the
+ * masked control field reference (CONTROL_MASK & CONTROL_FIELD_REF == CONTROL_MASK & RX_CONTROL_FIELD).
+ * @param xNewState new state for Control filtering enable bit.
+ * This parameter can be S_ENABLE or S_DISABLE.
+ * @retval None.
+ * @note This filtering control is enabled by default but the control mask is by default set to 0.
+ * As a matter of fact the user has to enable the control filtering bit after the packet initialization
+ * because the PktInit routine disables it.
+ */
+#define SpiritPktBasicFilterOnControlField(xNewState) SpiritPktCommonFilterOnControlField(xNewState)
+
+
+/**
+ * @brief Returns the enable bit of the control field filtering.
+ * @param None.
+ * @retval SpiritFunctionalState This parameter can be S_ENABLE or S_DISABLE.
+ */
+#define SpiritPktBasicGetFilterOnControlField() SpiritPktCommonGetFilterOnControlField();
+
+/**
+ *@}
+ */
+
+
+/**
+ * @defgroup PktBasic_Exported_Functions Pkt Basic Exported Functions
+ * @{
+ */
+
+void SpiritPktBasicInit(PktBasicInit* pxPktBasicInit);
+void SpiritPktBasicGetInfo(PktBasicInit* pxPktBasicInit);
+void SpiritPktBasicAddressesInit(PktBasicAddressesInit* pxPktBasicAddresses);
+void SpiritPktBasicGetAddressesInfo(PktBasicAddressesInit* pxPktBasicAddresses);
+void SpiritPktBasicSetFormat(void);
+void SpiritPktBasicAddressField(SpiritFunctionalState xAddressField);
+SpiritFunctionalState SpiritPktBasicGetAddressField(void);
+void SpiritPktBasicSetPayloadLength(uint16_t nPayloadLength);
+uint16_t SpiritPktBasicGetPayloadLength(void);
+uint16_t SpiritPktBasicGetReceivedPktLength(void);
+void SpiritPktBasicSetVarLengthWidth(uint16_t nMaxPayloadLength,SpiritFunctionalState xAddressField, BasicControlLength xControlLength);
+
+/**
+ *@}
+ */
+
+/**
+ *@}
+ */
+
+
+/**
+ *@}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+/******************* (C) COPYRIGHT 2015 STMicroelectronics *****END OF FILE****/
X-NUCLEO-IDS01A4 Sub-1GHz RF Expansion Board