ST / stm-spirit1-rf-driver

Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.

Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo

Currently supported boards:

Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:

  • Unmount resistor R4
  • Mount resistor R7

Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!

This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).

Diff: source/libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_Management.h

Revision:
34:edda6a7238ec
Child:
67:93bec0baf1de
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/source/libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_Management.h	Tue Nov 22 11:40:10 2016 +0100
@@ -0,0 +1,100 @@
+/**
+  ******************************************************************************
+ * @file    SPIRIT_Management.h
+  * @author  VMA division - AMS
+  * @version 3.2.2
+  * @date    08-July-2015
+ * @brief   The management layer for SPIRIT1 library.
+ * @details
+ *
+  * @attention
+ *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef SPIRIT_MANAGEMENT_H_
+#define SPIRIT_MANAGEMENT_H_
+
+/* Includes ------------------------------------------------------------------*/
+#include "SPIRIT_Config.h"
+
+#ifdef __cplusplus
+  extern "C" {
+#endif
+
+
+/**
+ * @addtogroup SPIRIT_Libraries
+ * @{
+ */
+
+
+/**
+ * @defgroup SPIRIT_MANAGEMENT          Management
+ * @brief Workarounds for Spirit1.
+ * @details See the file <i>@ref SPIRIT_Management.h</i> for more details.
+ * @{
+ */
+
+
+/**
+ * @addgroup SPIRIT_MANAGEMENT_FUNCTIONS
+ * @{
+ */
+
+   
+
+
+uint8_t SpiritManagementWaVcoCalibration(void);
+void SpiritManagementWaCmdStrobeTx(void);
+void SpiritManagementWaCmdStrobeRx(void);
+void SpiritManagementWaTRxFcMem(uint32_t nDesiredFreq);
+void SpiritManagementWaExtraCurrent(void);
+
+/**
+* @}
+*/
+
+/**
+* @}
+*/
+
+/**
+* @}
+*/
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif
+
+
+ /******************* (C) COPYRIGHT 2015 STMicroelectronics *****END OF FILE****/
+