ST / stm-spirit1-rf-driver

Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.

Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo

Currently supported boards:

Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:

  • Unmount resistor R4
  • Mount resistor R7

Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!

This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).

Diff: libs/spirit1/X-NUCLEO-IDS01Ax/radio_shield_config.h

Revision:
34:edda6a7238ec
Parent:
33:c226804be492
Child:
35:f3f444c379d0
--- a/libs/spirit1/X-NUCLEO-IDS01Ax/radio_shield_config.h	Mon Nov 21 13:26:17 2016 +0100
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,120 +0,0 @@
-/**
-******************************************************************************
-* @file    radio_shield_config.h
-* @author  System Lab - NOIDA
-* @version V1.0.0
-* @date    15-May-2014
-* @brief   This file contains definitions for:
-*          - LEDs and push-button available on RF shields
-******************************************************************************
-* @attention
-*
-* <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
-*
-* Redistribution and use in source and binary forms, with or without modification,
-* are permitted provided that the following conditions are met:
-*   1. Redistributions of source code must retain the above copyright notice,
-*      this list of conditions and the following disclaimer.
-*   2. Redistributions in binary form must reproduce the above copyright notice,
-*      this list of conditions and the following disclaimer in the documentation
-*      and/or other materials provided with the distribution.
-*   3. Neither the name of STMicroelectronics nor the names of its contributors
-*      may be used to endorse or promote products derived from this software
-*       without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*
-******************************************************************************
-*/ 
-  
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __RADIO_SHIELD_CONFIG_H
-#define __RADIO_SHIELD_CONFIG_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#ifdef USE_STM32L1XX_NUCLEO
-// #include "stm32l1xx_hal.h"
-#endif
-
-#ifdef USE_STM32F4XX_NUCLEO
-// #include "stm32f4xx_hal.h"
-#endif
-
-/** @addtogroup BSP
-  * @{
-  */
-
-/** @addtogroup X-NUCLEO-IDS02Ax
-  * @{
-  */
-
-/** @addtogroup RADIO_SHILED_LOW_LEVEL
-  * @{
-  */   
-   
-/* Exported types ------------------------------------------------------------*/
-typedef enum 
-{
-  RADIO_SHIELD_LED = 0
-} Led_t;
- 
-
-
-/* Exported constants --------------------------------------------------------*/
-
-
-/* Exported macro ------------------------------------------------------------*/
- /** @addtogroup RF_SHIELD_CONFIG_LOW_LEVEL_LED
- * @{
- */
-#define RADIO_SHIELD_LEDn                               ((uint8_t)1)
-
-#define RADIO_SHIELD_LED_GPIO_PIN                      GPIO_PIN_4                         /*Rx Indicator LED*/
-#define RADIO_SHIELD_LED_GPIO_PORT                     GPIOB
-#define RADIO_SHIELD_LED_GPIO_CLK_ENABLE()           __GPIOB_CLK_ENABLE()  
-#define RADIO_SHIELD_LED_GPIO_CLK_DISABLE()          __GPIOB_CLK_DISABLE()
-
-
-/* Exported Variables ------------------------------------------------------------*/
-
-
-/* Exported functions ------------------------------------------------------- */
-void RadioShieldLedInit(Led_t Led);
-void RadioShieldLedOn(Led_t Led);
-void RadioShieldLedOff(Led_t Led);
-void RadioShieldLedToggle(Led_t Led);                 
-                
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __RADIO_SHIELD_CONFIG_H */
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */ 
-    
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-