Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.

Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo

Currently supported boards:

Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:

  • Unmount resistor R4
  • Mount resistor R7

Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!

This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).

Revision:
34:edda6a7238ec
Parent:
33:c226804be492
Child:
35:f3f444c379d0
--- a/libs/spirit1/SPIRIT1_Library/Src/SPIRIT_General.c	Mon Nov 21 13:26:17 2016 +0100
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,449 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    SPIRIT_General.c
-  * @author  VMA division - AMS
-  * @version 3.2.2
-  * @date    08-July-2015
-  * @brief   Configuration and management of SPIRIT General functionalities.
-  * @details
-  *
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "SPIRIT_General.h"
-#include "MCU_Interface.h"
-
-
-/**
- * @addtogroup SPIRIT_Libraries
- * @{
- */
-
-
-/**
- * @addtogroup SPIRIT_General
- * @{
- */
-
-
-/**
- * @defgroup General_Private_TypesDefinitions   General Private Types Definitions
- * @{
- */
-
-/**
- *@}
- */
-
-
-/**
- * @defgroup General_Private_Defines            General Private Defines
- * @{
- */
-
-/**
- *@}
- */
-
-
-/**
- * @defgroup General_Private_Macros             General Private Macros
- * @{
- */
-
-/**
- *@}
- */
-
-
-/**
- * @defgroup General_Private_Variables          General Private Variables
- * @{
- */
-
-
-/**
- *@}
- */
-
-
-/**
- * @defgroup General_Private_FunctionPrototypes         General Private Function Prototypes
- * @{
- */
-
-/**
- *@}
- */
-
-
-/**
- * @defgroup General_Private_Functions                          General Private Functions
- * @{
- */
-
-/**
- * @brief  Enables or Disables the output of battery level detector.
- * @param  xNewState new state for battery level detector.
- *         This parameter can be: S_ENABLE or S_DISABLE.
- * @retval None
- */
-void SpiritGeneralBatteryLevel(SpiritFunctionalState xNewState)
-{
-  uint8_t tempRegValue;
-
-  /* Check the parameters */
-  s_assert_param(IS_SPIRIT_FUNCTIONAL_STATE(xNewState));
-
-  /* Reads the ANA_FUNC_CONF0_BASE register value */
-  g_xStatus = SpiritSpiReadRegisters(ANA_FUNC_CONF0_BASE, 1, &tempRegValue);
-
-  /* Build the value to be stored */
-  if(xNewState == S_ENABLE)
-  {
-    tempRegValue |= BATTERY_LEVEL_MASK;
-  }
-  else
-  {
-    tempRegValue &= ~BATTERY_LEVEL_MASK;
-  }
-
-  /* Writes the new value */
-  g_xStatus = SpiritSpiWriteRegisters(ANA_FUNC_CONF0_BASE, 1, &tempRegValue);
-
-}
-
-
-/**
- * @brief  Sets the battery level.
- * @param  xBatteryLevel new state for battery level.
- *         This parameter can be a value of @ref BatteryLevel.
- * @retval None.
- */
-void SpiritGeneralSetBatteryLevel(BatteryLevel xBatteryLevel)
-{
-  uint8_t tempRegValue;
-
-  /* Check the parameters */
-  s_assert_param(IS_BLD_LVL(xBatteryLevel));
-
-  /* Reads the ANA_FUNC_CONF1_BASE register value */
-  g_xStatus = SpiritSpiReadRegisters(ANA_FUNC_CONF1_BASE, 1, &tempRegValue);
-
-  /* Build the value to be stored */
-  tempRegValue &= ~ANA_FUNC_CONF1_SET_BLD_LVL_MASK;
-  switch(xBatteryLevel)
-  {
-    case BLD_LVL_2_7_V:
-      tempRegValue |= BLD_LVL_2_7;
-      break;
-    case BLD_LVL_2_5_V:
-      tempRegValue |= BLD_LVL_2_5;
-      break;
-    case BLD_LVL_2_3_V:
-      tempRegValue |= BLD_LVL_2_3;
-      break;
-    case BLD_LVL_2_1_V:
-      tempRegValue |= BLD_LVL_2_1;
-      break;
-  }
-
-  /* Writes the new value */
-  g_xStatus = SpiritSpiWriteRegisters(ANA_FUNC_CONF1_BASE, 1, &tempRegValue);
-
-}
-
-
-/**
- * @brief  Returns the settled battery level.
- * @param  None.
- * @retval BatteryLevel Settled battery level. This parameter can be a value of @ref BatteryLevel.
- */
-BatteryLevel SpiritGeneralGetBatteryLevel(void)
-{
-  uint8_t tempRegValue;
-
-  /* Reads the ANA_FUNC_CONF1_BASE register value */
-  g_xStatus = SpiritSpiReadRegisters(ANA_FUNC_CONF1_BASE, 1, &tempRegValue);
-
-  /* Mask the battery level field and returns the settled battery level */
-  return ((BatteryLevel)(tempRegValue & ANA_FUNC_CONF1_SET_BLD_LVL_MASK));
-
-}
-
-
-/**
- * @brief  Enables or Disables the output of brown out detector.
- * @param  xNewState new state for brown out detector.
- *         This parameter can be: S_ENABLE or S_DISABLE.
- * @retval None.
- */
-void SpiritGeneralBrownOut(SpiritFunctionalState xNewState)
-{
-  uint8_t tempRegValue;
-
-  /* Check the parameters */
-  s_assert_param(IS_SPIRIT_FUNCTIONAL_STATE(xNewState));
-
-  /* Reads the ANA_FUNC_CONF0_BASE register value */
-  g_xStatus = SpiritSpiReadRegisters(ANA_FUNC_CONF0_BASE, 1, &tempRegValue);
-
-  /* Build the value to be stored */
-  if(xNewState == S_ENABLE)
-  {
-    tempRegValue |= BROWN_OUT_MASK;
-  }
-  else
-  {
-    tempRegValue &= ~BROWN_OUT_MASK;
-  }
-
-  /* Writes value on register */
-  g_xStatus = SpiritSpiWriteRegisters(ANA_FUNC_CONF0_BASE, 1, &tempRegValue);
-
-}
-
-
-/**
- * @brief  Sets High Power Mode.
- * @param  xNewState new state for High Power Mode.
- *         This parameter can be: S_ENABLE or S_DISABLE.
- * @retval None.
- */
-void SpiritGeneralHighPwr(SpiritFunctionalState xNewState)
-{
-  uint8_t tempRegValue;
-
-  /* Check the parameters */
-  s_assert_param(IS_SPIRIT_FUNCTIONAL_STATE(xNewState));
-
-  /* Reads the ANA_FUNC_CONF0_BASE register value */
-  g_xStatus = SpiritSpiReadRegisters(ANA_FUNC_CONF0_BASE, 1, &tempRegValue);
-
-  /* Build the value to write */
-  if(xNewState == S_ENABLE)
-  {
-    tempRegValue |= HIGH_POWER_MODE_MASK;
-  }
-  else
-  {
-    tempRegValue &= ~HIGH_POWER_MODE_MASK;
-  }
-
-  /* Writes the new value on register */
-  g_xStatus = SpiritSpiWriteRegisters(ANA_FUNC_CONF0_BASE, 1, &tempRegValue);
-
-}
-
-
-/**
- * @brief  Sets External Reference.
- * @param  xExtMode new state for the external reference.
- *         This parameter can be: MODE_EXT_XO or MODE_EXT_XIN.
- * @retval None.
- */
-void SpiritGeneralSetExtRef(ModeExtRef xExtMode)
-{
-  uint8_t tempRegValue;
-
-  /* Check the parameters */
-  s_assert_param(IS_MODE_EXT(xExtMode));
-
-  /* Reads the ANA_FUNC_CONF0_BASE register value */
-  SpiritSpiReadRegisters(ANA_FUNC_CONF0_BASE, 1, &tempRegValue);
-
-  /* Build the value to write */
-  if(xExtMode == MODE_EXT_XO)
-  {
-    tempRegValue &= ~EXT_REF_MASK;
-  }
-  else
-  {
-    tempRegValue |= EXT_REF_MASK;
-  }
-
-  /* Writes value on register */
-  g_xStatus = SpiritSpiWriteRegisters(ANA_FUNC_CONF0_BASE, 1, &tempRegValue);
-
-}
-
-
-/**
- * @brief  Returns External Reference.
- * @param  None.
- * @retval ModeExtRef Settled external reference.
- *         This parameter can be: MODE_EXT_XO or MODE_EXT_XIN.
- */
-ModeExtRef SpiritGeneralGetExtRef(void)
-{
-  uint8_t tempRegValue;
-
-  /* Reads the ANA_FUNC_CONF0_BASE register value and return the result */
-  g_xStatus = SpiritSpiReadRegisters(ANA_FUNC_CONF0_BASE, 1, &tempRegValue);
-
-  /* Mask the EXT_REF field field and returns the settled reference signal */
-  return ((ModeExtRef)((tempRegValue & 0x10)>>4));
-
-}
-
-
-/**
- * @brief  Sets XO gm at startup.
- * @param  xGm transconductance value of XO at startup.
- *         This parameter can be a value of @ref GmConf.
- * @retval None.
- */
-void SpiritGeneralSetXoGm(GmConf xGm)
-{
-  uint8_t tempRegValue;
-
-  /* Check the parameters */
-  s_assert_param(IS_GM_CONF(xGm));
-
-  /* Reads the ANA_FUNC_CONF1_BASE register value */
-  g_xStatus = SpiritSpiReadRegisters(ANA_FUNC_CONF1_BASE, 1, &tempRegValue);
-
-  /* Build the value to write */
-  tempRegValue &= ~ANA_FUNC_CONF1_GMCONF_MASK;
-  switch(xGm)
-  {
-    case GM_SU_13_2:
-      tempRegValue |= GM_13_2;
-      break;
-    case GM_SU_18_2:
-      tempRegValue |= GM_18_2;
-      break;
-    case GM_SU_21_5:
-      tempRegValue |= GM_21_5;
-      break;
-    case GM_SU_25_6:
-      tempRegValue |= GM_25_6;
-      break;
-    case GM_SU_28_8:
-      tempRegValue |= GM_28_8;
-      break;
-    case GM_SU_33_9:
-      tempRegValue |= GM_33_9;
-      break;
-    case GM_SU_38_5:
-      tempRegValue |= GM_38_5;
-      break;
-    case GM_SU_43_0:
-      tempRegValue |= GM_43_0;
-      break;
-  }
-
-  /* Writes new value on register */
-  g_xStatus = SpiritSpiWriteRegisters(ANA_FUNC_CONF1_BASE, 1, &tempRegValue);
-
-}
-
-
-/**
- * @brief  Returns the configured XO gm at startup.
- * @param  None.
- * @retval GmConf Settled XO gm. This parameter can be a value of @ref GmConf.
- */
-GmConf SpiritGeneralGetXoGm(void)
-{
-  uint8_t tempRegValue;
-
-  /* Reads the ANA_FUNC_CONF1_BASE register value */
-  g_xStatus = SpiritSpiReadRegisters(ANA_FUNC_CONF1_BASE, 1, &tempRegValue);
-
-  /* Mask the GM_CONF field field and returns the settled transconductance of the XO at startup */
-  return ((GmConf)((tempRegValue & 0x1C)>>2));
-
-}
-
-
-/**
- * @brief  Returns the settled packet format.
- * @param  None.
- * @retval PacketType Settled packet type. This parameter can be a value of @ref PacketType.
- */
-PacketType SpiritGeneralGetPktType(void)
-{
-  uint8_t tempRegValue;
-
-  /* Reads the PROTOCOL1 register */
-  g_xStatus = SpiritSpiReadRegisters(PCKTCTRL3_BASE, 1, &tempRegValue);
-
-  /* cast and return value */
-  return (PacketType)(tempRegValue>>6);
-
-}
-
-
-
-/**
- * @brief  Returns device part number.
- * @param  None.
- * @retval uint16_t Device part number.
- */
-uint16_t SpiritGeneralGetDevicePartNumber(void)
-{
-  uint8_t tempRegValue[2];
-
-  /* Reads the register value containing the device part number */
-  g_xStatus = SpiritSpiReadRegisters(DEVICE_INFO1_PARTNUM, 2, tempRegValue);
-
-  return ((((uint16_t)tempRegValue[0])<<8) | ((uint16_t)tempRegValue[1]));
-
-}
-
-/**
- * @brief  Returns SPIRIT RF board version.
- * @param  None.
- * @retval SPIRIT RF board version: 0x30 is the only admitted value
- */
-uint8_t SpiritGeneralGetSpiritVersion(void)
-{
-  uint8_t ver; 
-  SpiritSpiReadRegisters(DEVICE_INFO0_VERSION, 1, &ver);
-  return ver;
-}
-
-/**
- *@}
- */
-
-
-/**
- *@}
- */
-
-
-/**
- *@}
- */
-
-
-/******************* (C) COPYRIGHT 2015 STMicroelectronics *****END OF FILE****/