Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.

Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo

Currently supported boards:

Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:

  • Unmount resistor R4
  • Mount resistor R7

Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!

This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).

Revision:
34:edda6a7238ec
Parent:
33:c226804be492
Child:
35:f3f444c379d0
--- a/libs/spirit1/SPIRIT1_Library/Src/SPIRIT_Commands.c	Mon Nov 21 13:26:17 2016 +0100
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,144 +0,0 @@
-/**
-  ******************************************************************************
- * @file    SPIRIT_Commands.c
-  * @author  VMA division - AMS
-  * @version 3.2.2
-  * @date    08-July-2015
- * @brief   Management of SPIRIT Commands.
- *
-  * @attention
- *
-  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "SPIRIT_Commands.h"
-#include "MCU_Interface.h"
-
-
-
-
-/**
- * @addtogroup SPIRIT_Libraries
- * @{
- */
-
-
-/**
- * @addtogroup SPIRIT_Commands
- * @{
- */
-
-
-/**
- * @defgroup Commands_Private_TypesDefinitions  Commands Private TypesDefinitions
- * @{
- */
-
-/**
- *@}
- */
-
-
-/**
- * @defgroup Commands_Private_Defines           Commands Private Defines
- * @{
- */
-
-/**
- *@}
- */
-
-/**
- * @defgroup Commands_Private_Macros            Commands Private Macros
- * @{
- */
-
-/**
- *@}
- */
-
-
-/**
- * @defgroup Commands_Private_Variables         Commands Private Variables
- * @{
- */
-
-/**
- *@}
- */
-
-
-
-/**
- * @defgroup Commands_Private_FunctionPrototypes        Commands Private Function Prototypes
- * @{
- */
-
-/**
- *@}
- */
-
-
-/**
- * @defgroup Commands_Private_Functions                 Commands Private Functions
- * @{
- */
-
-/**
- * @brief  Sends a specific command to SPIRIT.
- * @param  xCommandCode code of the command to send.
-           This parameter can be any value of @ref SpiritCmd.
- * @retval None.
- */
-void SpiritCmdStrobeCommand(SpiritCmd xCommandCode)
-{
-  /* Check the parameters */
-  s_assert_param(IS_SPIRIT_CMD(xCommandCode));
-
-  g_xStatus = SpiritSpiCommandStrobes((uint8_t) xCommandCode);
-}
-
-
-/**
- *@}
- */
-
-
-/**
- *@}
- */
-
-
-/**
- *@}
- */
-
-
-
-
-/******************* (C) COPYRIGHT 2015 STMicroelectronics *****END OF FILE****/