Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.
Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo
Currently supported boards:
Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:
- Unmount resistor
R4 - Mount resistor
R7
Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!
This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).
Diff: libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_Types.h
- Revision:
- 34:edda6a7238ec
- Parent:
- 33:c226804be492
- Child:
- 35:f3f444c379d0
--- a/libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_Types.h Mon Nov 21 13:26:17 2016 +0100
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,276 +0,0 @@
-/**
- ******************************************************************************
- * @file SPIRIT_Types.h
- * @author VMA division - AMS
- * @version 3.2.2
- * @date 08-July-2015
- * @brief Header file for SPIRIT types.
- * @details
- *
- * This module provide some types definitions which will be used in
- * all the modules of this library. Here is defined also the global
- * variable @ref g_xStatus which contains the status of Spirit and
- * is updated every time an SPI transaction occurs.
- *
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __SPIRIT_GENERICTYPES_H
-#define __SPIRIT_GENERICTYPES_H
-
-
-/* Includes ------------------------------------------------------------------*/
-
-/* Include all integer types definitions */
-#include <stdint.h>
-#include <stdio.h>
-#include "SPIRIT_Regs.h"
-
-
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-
-/**
- * @addtogroup SPIRIT_Libraries
- * @{
- */
-
-
-/**
- * @defgroup SPIRIT_Types Types
- * @brief Module for SPIRIT types definition.
- * * @details See the file <i>@ref SPIRIT_Types.h</i> for more details.
- * @{
- */
-
-/**
- * @defgroup Types_Exported_Types Types Exported Types
- * @{
- */
-
-/**
- * @brief Spirit Functional state. Used to enable or disable a specific option.
- */
-typedef enum
-{
- S_DISABLE = 0,
- S_ENABLE = !S_DISABLE
-
-} SpiritFunctionalState;
-
-#define IS_SPIRIT_FUNCTIONAL_STATE(STATE) (STATE == S_DISABLE || STATE == S_ENABLE)
-
-/**
- * @brief Spirit Flag status. Used to control the state of a flag.
- */
-typedef enum
-{
- S_RESET = 0,
- S_SET = !S_RESET
-
-} SpiritFlagStatus;
-
-#define IS_SPIRIT_FLAG_STATUS(STATUS) (STATUS == S_RESET || STATUS == S_SET)
-
-
-/**
- * @brief boolean type enumeration.
- */
-typedef enum
-{
- S_FALSE = 0,
- S_TRUE = !S_FALSE
-
-} SpiritBool;
-
-
-/**
- * @brief SPIRIT States enumeration.
- */
-typedef enum
-{
- MC_STATE_STANDBY =0x40, /*!< STANDBY */
- MC_STATE_SLEEP =0x36, /*!< SLEEP */
- MC_STATE_READY =0x03, /*!< READY */
- MC_STATE_PM_SETUP =0x3D, /*!< PM_SETUP */
- MC_STATE_XO_SETTLING =0x23, /*!< XO_SETTLING */
- MC_STATE_SYNTH_SETUP =0x53, /*!< SYNT_SETUP */
- MC_STATE_PROTOCOL =0x1F, /*!< PROTOCOL */
- MC_STATE_SYNTH_CALIBRATION =0x4F, /*!< SYNTH */
- MC_STATE_LOCK =0x0F, /*!< LOCK */
- MC_STATE_RX =0x33, /*!< RX */
- MC_STATE_TX =0x5F /*!< TX */
-
-} SpiritState;
-
-
-
-/**
- * @brief SPIRIT Status. This definition represents the single field of the SPIRIT
- * status returned on each SPI transaction, equal also to the MC_STATE registers.
- * This field-oriented structure allows user to address in simple way the single
- * field of the SPIRIT status.
- * The user shall define a variable of SpiritStatus type to access on SPIRIT status fields.
- * @note The fields order in the structure depends on used endianness (little or big
- * endian). The actual definition is valid ONLY for LITTLE ENDIAN mode. Be sure to
- * change opportunely the fields order when use a different endianness.
- */
-
-typedef struct
-{
- uint8_t XO_ON:1; /*!< This one bit field notifies if XO is operating
- (XO_ON is 1) or not (XO_On is 0) */
- SpiritState MC_STATE: 7; /*!< This 7 bits field indicates the state of the
- Main Controller of SPIRIT. The possible states
- and their corresponding values are defined in
- @ref SpiritState */
- uint8_t ERROR_LOCK: 1; /*!< This one bit field notifies if there is an
- error on RCO calibration (ERROR_LOCK is 1) or
- not (ERROR_LOCK is 0) */
- uint8_t RX_FIFO_EMPTY: 1; /*!< This one bit field notifies if RX FIFO is empty
- (RX_FIFO_EMPTY is 1) or not (RX_FIFO_EMPTY is 0) */
- uint8_t TX_FIFO_FULL: 1; /*!< This one bit field notifies if TX FIFO is full
- (TX_FIFO_FULL is 1) or not (TX_FIFO_FULL is 0) */
- uint8_t ANT_SELECT: 1; /*!< This one bit field notifies the currently selected
- antenna */
- uint8_t : 4; /*!< This 4 bits field are reserved and equal to 5 */
-
-}SpiritStatus;
-
-
-
-/**
- * @}
- */
-
-
-/**
- * @defgroup Types_Exported_Constants Types Exported Constants
- * @{
- */
-
-
-/**
- * @}
- */
-
-/**
- * @defgroup Types_Exported_Variables Types Exported Variables
- * @{
- */
-
-extern volatile SpiritStatus g_xStatus;
-
-/**
- * @}
- */
-
-/**
- * @defgroup Types_Exported_Macros Types Exported Macros
- * @{
- */
-
-#ifdef SPIRIT_USE_FULL_ASSERT
- /**
- * @brief The s_assert_param macro is used for function's parameters check.
- * @param expr If expr is false, it calls assert_failed function which reports
- * the name of the source file and the source line number of the call
- * that failed. If expr is true, it returns no value.
- * @retval None
- */
- #define s_assert_param(expr) ((expr) ? (void)0 : s_assert_failed((uint8_t *)__FILE__, __LINE__))
- void s_assert_failed(uint8_t* file, uint32_t line);
-#elif SPIRIT_USE_VCOM_ASSERT
- /**
- * @brief The s_assert_param macro is used for function's parameters check.
- * @param expr If expr is false, it calls assert_failed function which reports
- * the name of the source file and the source line number of the call
- * that failed. If expr is true, it returns no value.
- * @retval None
- */
- #define s_assert_param(expr) ((expr) ? (void)0 : s_assert_failed((uint8_t *)__FILE__, __LINE__,#expr))
- void s_assert_failed(uint8_t* file, uint32_t line, char* expression);
-
-#elif SPIRIT_USE_FRAME_ASSERT
- /**
- * @brief The s_assert_param macro is used for function's parameters check.
- * @param expr If expr is false, it calls assert_failed function which reports
- * the name of the source file and the source line number of the call
- * that failed. If expr is true, it returns no value.
- * @retval None
- */
-#define s_assert_param(expr) ((expr) ? (void)0 : s_assert_failed(#expr))
- void s_assert_failed(char* expression);
-#else
-#define s_assert_param(expr) {}
-#endif
-
-/**
- * @brief Returns the absolute value.
- */
-#define S_ABS(a) ((a)>0?(a):-(a))
-
-
-/**
- * @}
- */
-
-
-/**
- * @defgroup Types_Exported_Functions Types Exported Functions
- * @{
- */
-
-void SpiritRefreshStatus(void);
-
-/**
- *@}
- */
-
-/**
- * @}
- */
-
-
-/**
- * @}
- */
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
-
-/******************* (C) COPYRIGHT 2015 STMicroelectronics *****END OF FILE****/
X-NUCLEO-IDS01A4 Sub-1GHz RF Expansion Board