Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.
Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo
Currently supported boards:
Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:
- Unmount resistor
R4 - Mount resistor
R7
Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!
This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).
Diff: libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_Timer.h
- Revision:
- 34:edda6a7238ec
- Parent:
- 33:c226804be492
- Child:
- 35:f3f444c379d0
--- a/libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_Timer.h Mon Nov 21 13:26:17 2016 +0100
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,239 +0,0 @@
-/**
- ******************************************************************************
- * @file SPIRIT_Timer.h
- * @author VMA division - AMS
- * @version 3.2.2
- * @date 08-July-2015
- * @brief Configuration and management of SPIRIT timers.
- * @details
- *
- * This module provides API to configure the Spirit timing mechanisms.
- * They allow the user to set the timer registers using raw values or
- * compute them since the desired timer value is expressed in ms.
- * Moreover the management of the Spirit LDCR mode can be done using
- * these API.
- *
- * <b>Example:</b>
- * @code
- * ...
- *
- * SpiritTimerSetRxTimeoutMs(50.0);
- * SpiritTimerSetWakeUpTimerMs(150.0);
- *
- * // IRQ configuration for RX_TIMEOUT and WAKEUP_TIMEOUT
- * ...
- *
- * SpiritTimerLdcrMode(S_ENABLE);
- *
- * ...
- *
- * @endcode
- *
- *
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __SPIRIT1_TIMER_H
-#define __SPIRIT1_TIMER_H
-
-
-/* Includes ------------------------------------------------------------------*/
-
-#include "SPIRIT_Regs.h"
-#include "SPIRIT_Types.h"
-
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-
-/**
- * @addtogroup SPIRIT_Libraries
- * @{
- */
-
-
-/**
- * @defgroup SPIRIT_Timer Timer
- * @brief Configuration and management of SPIRIT Timers.
- * @details See the file <i>@ref SPIRIT_Timer.h</i> for more details.
- * @{
- */
-
-
-/**
- * @defgroup Timer_Exported_Types Timer Exported Types
- * @{
- */
-
-/**
- * @brief All the possible RX timeout stop conditions enumeration.
- */
-typedef enum{
-
- NO_TIMEOUT_STOP = 0x00, /*!< Timeout never stopped */
- TIMEOUT_ALWAYS_STOPPED = 0x08, /*!< Timeout always stopped (default) */
- RSSI_ABOVE_THRESHOLD = 0x04, /*!< Timeout stopped on RSSI above threshold */
- SQI_ABOVE_THRESHOLD = 0x02, /*!< Timeout stopped on SQI above threshold */
- PQI_ABOVE_THRESHOLD = 0x01, /*!< Timeout stopped on PQI above threshold */
- RSSI_AND_SQI_ABOVE_THRESHOLD = 0x06, /*!< Timeout stopped on both RSSI and SQI above threshold */
- RSSI_AND_PQI_ABOVE_THRESHOLD = 0x05, /*!< Timeout stopped on both RSSI and PQI above threshold */
- SQI_AND_PQI_ABOVE_THRESHOLD = 0x03, /*!< Timeout stopped on both SQI and PQI above threshold */
- ALL_ABOVE_THRESHOLD = 0x07, /*!< Timeout stopped only if RSSI, SQI and PQI are above threshold */
- RSSI_OR_SQI_ABOVE_THRESHOLD = 0x0E, /*!< Timeout stopped if one between RSSI or SQI are above threshold */
- RSSI_OR_PQI_ABOVE_THRESHOLD = 0x0D, /*!< Timeout stopped if one between RSSI or PQI are above threshold */
- SQI_OR_PQI_ABOVE_THRESHOLD = 0x0B, /*!< Timeout stopped if one between SQI or PQI are above threshold */
- ANY_ABOVE_THRESHOLD = 0x0F /*!< Timeout stopped if one among RSSI, SQI or SQI are above threshold */
-
-} RxTimeoutStopCondition;
-
-
-#define IS_RX_TIMEOUT_STOP_CONDITION(COND) ( COND == NO_TIMEOUT_STOP || \
- COND == TIMEOUT_ALWAYS_STOPPED || \
- COND == RSSI_ABOVE_THRESHOLD || \
- COND == SQI_ABOVE_THRESHOLD || \
- COND == PQI_ABOVE_THRESHOLD || \
- COND == RSSI_AND_SQI_ABOVE_THRESHOLD || \
- COND == RSSI_AND_PQI_ABOVE_THRESHOLD || \
- COND == SQI_AND_PQI_ABOVE_THRESHOLD || \
- COND == ALL_ABOVE_THRESHOLD || \
- COND == RSSI_OR_SQI_ABOVE_THRESHOLD || \
- COND == RSSI_OR_PQI_ABOVE_THRESHOLD || \
- COND == SQI_OR_PQI_ABOVE_THRESHOLD || \
- COND == ANY_ABOVE_THRESHOLD )
-
-
-
-/**
- * @}
- */
-
-
-/**
- * @defgroup Timer_Exported_Constants Timer Exported Constants
- * @{
- */
-
-/**
- * @brief It represents the Time Step for RX_Timeout timer in case of 24 MHz Crystal, expressed in us.
- * It is equal to 1210/(24*10^6). With this time step it is possible to fix the RX_Timeout to
- * a minimum value of 50.417us to a maximum value of about 3.278 s.
- * Remember that it is possible to have infinite RX_Timeout writing 0 in the RX_Timeout_Counter and/or RX_Timeout_Prescaler registers.
- */
-#define RX_TCLK_24MHz 50.417f
-#define IS_RX_TIMEOUT_24MHz(TIMEOUT) (TIMEOUT*1000)>=RX_TCLK_24MHz
-
-/**
- * @brief It represents the Time Step for RX_Timeout timer in case of 26 MHz Crystal, expressed in us.
- * It is equal to 1210/(26*10^6). With this time step it is possible to fix the RX_Timeout to
- * a minimum value of 46.538us to a maximum value of about 3.026 s.
- * Remember that it is possible to have infinite RX_Timeout writing 0 in the RX_Timeout_Counter register.
- */
-#define RX_TCLK_26MHz 46.538f
-#define IS_RX_TIMEOUT_26MHz(TIMEOUT) (TIMEOUT*1000)>=RX_TCLK_26MHz
-
-/**
- * @brief It represents the Time Step for RX_Wakeup timer expressed in us. This timer is based on RCO (about 34.7 kHZ).
- * With this time step it is possible to fix the Wakeup_Timeout to a minimum value of 28.818us to a maximum
- * value of about 1.888 s.
- */
-#define WAKEUP_TCLK 28.818f
-#define IS_WKUP_TIMEOUT(TIMEOUT) (TIMEOUT*1000)>=WAKEUP_TCLK
-
-
-
-/**
- * @}
- */
-
-
-/**
- * @defgroup Timer_Exported_Macros Timer Exported Macros
- * @{
- */
-
-#define SET_INFINITE_RX_TIMEOUT() SpiritTimerSetRxTimeoutCounter(0)
-
-/**
- * @}
- */
-
-
-/**
- * @defgroup Timer_Exported_Functions Timer Exported Functions
- * @{
- */
-
-void SpiritTimerLdcrMode(SpiritFunctionalState xNewState);
-void SpiritTimerLdcrAutoReload(SpiritFunctionalState xNewState);
-SpiritFunctionalState SpiritTimerLdcrGetAutoReload(void);
-void SpiritTimerSetRxTimeout(uint8_t cCounter , uint8_t cPrescaler);
-void SpiritTimerSetRxTimeoutMs(float fDesiredMsec);
-void SpiritTimerSetRxTimeoutCounter(uint8_t cCounter);
-void SpiritTimerSetRxTimeoutPrescaler(uint8_t cPrescaler);
-void SpiritTimerGetRxTimeout(float* pfTimeoutMsec, uint8_t* pcCounter , uint8_t* pcPrescaler);
-void SpiritTimerSetWakeUpTimer(uint8_t cCounter , uint8_t cPrescaler);
-void SpiritTimerSetWakeUpTimerMs(float fDesiredMsec);
-void SpiritTimerSetWakeUpTimerCounter(uint8_t cCounter);
-void SpiritTimerSetWakeUpTimerPrescaler(uint8_t cPrescaler);
-void SpiritTimerSetWakeUpTimerReloadMs(float fDesiredMsec);
-void SpiritTimerGetWakeUpTimer(float* pfWakeUpMsec, uint8_t* pcCounter , uint8_t* pcPrescaler);
-void SpiritTimerSetWakeUpTimerReload(uint8_t cCounter , uint8_t cPrescaler);
-void SpiritTimerSetWakeUpTimerReloadCounter(uint8_t cCounter);
-void SpiritTimerSetWakeUpTimerReloadPrescaler(uint8_t cPrescaler);
-void SpiritTimerGetWakeUpTimerReload(float* pfWakeUpReloadMsec, uint8_t* pcCounter , uint8_t* pcPrescaler);
-void SpiritTimerComputeWakeUpValues(float fDesiredMsec , uint8_t* pcCounter , uint8_t* pcPrescaler);
-void SpiritTimerComputeRxTimeoutValues(float fDesiredMsec , uint8_t* pcCounter , uint8_t* pcPrescaler);
-void SpiritTimerSetRxTimeoutStopCondition(RxTimeoutStopCondition xStopCondition);
-void SpiritTimerReloadStrobe(void);
-uint16_t SpiritTimerGetRcoFrequency(void);
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
-
-/******************* (C) COPYRIGHT 2015 STMicroelectronics *****END OF FILE****/
-
X-NUCLEO-IDS01A4 Sub-1GHz RF Expansion Board