Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.
Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo
Currently supported boards:
Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:
- Unmount resistor
R4 - Mount resistor
R7
Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!
This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).
Diff: libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_DirectRF.h
- Revision:
- 34:edda6a7238ec
- Parent:
- 33:c226804be492
- Child:
- 35:f3f444c379d0
--- a/libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_DirectRF.h Mon Nov 21 13:26:17 2016 +0100
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,165 +0,0 @@
-/**
- ******************************************************************************
- * @file SPIRIT_DirectRF.h
- * @author VMA division - AMS
- * @version 3.2.2
- * @date 08-July-2015
- * @brief Configuration and management of SPIRIT direct transmission / receive modes.
- * @details
- *
- * This module contains functions to manage the direct Tx/Rx mode.
- * The user can choose the way to send data to Spirit through the
- * enumerative types <i>@ref DirectTx</i>/<i>@ref DirectRx</i>.
- *
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __SPIRIT1_DIRECT_RF_H
-#define __SPIRIT1_DIRECT_RF_H
-
-/* Includes ------------------------------------------------------------------*/
-
-#include "SPIRIT_Regs.h"
-#include "SPIRIT_Types.h"
-
-
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-
-/**
- * @addtogroup SPIRIT_Libraries
- * @{
- */
-
-
-/**
- * @defgroup SPIRIT_DirectRf Direct RF
- * @brief Configuration and management of SPIRIT direct transmission / receive modes.
- * @details See the file <i>@ref SPIRIT_DirectRF.h</i> for more details.
- * @{
- */
-
-/**
- * @defgroup DirectRf_Exported_Types Direct RF Exported Types
- * @{
- */
-
-/**
- * @brief Direct transmission mode enumeration for SPIRIT.
- */
-typedef enum
-{
- NORMAL_TX_MODE = 0x00, /*!< Normal mode, no direct transmission is used */
- DIRECT_TX_FIFO_MODE = 0x04, /*!< Source is FIFO: payload bits are continuously read from the TX FIFO */
- DIRECT_TX_GPIO_MODE = 0x08, /*!< Source is GPIO: payload bits are continuously read from one of the GPIO ports and transmitted without any processing */
- PN9_TX_MODE = 0x0C /*!< A pseudorandom binary sequence is generated internally */
-}DirectTx;
-
-#define IS_DIRECT_TX(MODE) (((MODE) == NORMAL_TX_MODE) || \
- ((MODE) == DIRECT_TX_FIFO_MODE) || \
- ((MODE) == DIRECT_TX_GPIO_MODE) || \
- ((MODE) == PN9_TX_MODE))
-
-/**
- * @brief Direct receive mode enumeration for SPIRIT.
- */
-typedef enum
-{
- NORMAL_RX_MODE = 0x00, /*!< Normal mode, no direct reception is used */
- DIRECT_RX_FIFO_MODE = 0x10, /*!< Destination is FIFO: payload bits are continuously written to the RX FIFO and not subjected to any processing*/
- DIRECT_RX_GPIO_MODE = 0x20 /*!< Destination is GPIO: payload bits are continuously written to one of the GPIO ports and not subjected to any processing*/
-}DirectRx;
-
-#define IS_DIRECT_RX(MODE) (((MODE) == NORMAL_RX_MODE) || \
- ((MODE) == DIRECT_RX_FIFO_MODE) || \
- ((MODE) == DIRECT_RX_GPIO_MODE))
-
-
-/**
- *@}
- */
-
-
-/**
- * @defgroup DirectRf_Exported_Constants Direct RF Exported Constants
- * @{
- */
-
-
-/**
- *@}
- */
-
-
-/**
- * @defgroup DirectRf_Exported_Macros Direct RF Exported Macros
- * @{
- */
-
-
-/**
- *@}
- */
-
-
-/**
- * @defgroup DirectRf_Exported_Functions Direct RF Exported Functions
- * @{
- */
-
-void SpiritDirectRfSetRxMode(DirectRx xDirectRx);
-DirectRx SpiritDirectRfGetRxMode(void);
-void SpiritDirectRfSetTxMode(DirectTx xDirectTx);
-DirectTx SpiritDirectRfGetTxMode(void);
-
-/**
- *@}
- */
-
-/**
- *@}
- */
-
-
-/**
- *@}
- */
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
-
-/******************* (C) COPYRIGHT 2015 STMicroelectronics *****END OF FILE****/
X-NUCLEO-IDS01A4 Sub-1GHz RF Expansion Board