Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.
Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo
Currently supported boards:
Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:
- Unmount resistor
R4 - Mount resistor
R7
Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!
This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).
Diff: libs/Contiki_STM32_Library/spirit1-const.h
- Revision:
- 34:edda6a7238ec
- Parent:
- 33:c226804be492
- Child:
- 35:f3f444c379d0
--- a/libs/Contiki_STM32_Library/spirit1-const.h Mon Nov 21 13:26:17 2016 +0100 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,75 +0,0 @@ -/* - * Copyright (c) 2012, STMicroelectronics. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the copyright holder nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - * - */ -/*---------------------------------------------------------------------------*/ -#ifndef __SPIRIT1_CONST_H__ -#define __SPIRIT1_CONST_H__ -/*---------------------------------------------------------------------------*/ - -/*---------------------------------------------------------------------------*/ - -/* The state bitfield and values for different states, as read from MC_STATE[1:0] registers, -which are returned on any SPI read or write operation. */ -#define SPIRIT1_STATE_STATEBITS (0x00FE) -/*---------------------------------------------------------------------------*/ - -#define SPIRIT1_STATE_STANDBY ((0x0040)<<1) -#define SPIRIT1_STATE_SLEEP ((0x0036)<<1) -#define SPIRIT1_STATE_READY ((0x0003)<<1) -#define SPIRIT1_STATE_LOCK ((0x000F)<<1) -#define SPIRIT1_STATE_RX ((0x0033)<<1) -#define SPIRIT1_STATE_TX ((0x005F)<<1) -/* NB the below states were extracted from ST drivers, but are not specified in the datasheet */ -#define SPIRIT1_STATE_PM_SETUP ((0x003D)<<1) -#define SPIRIT1_STATE_XO_SETTLING ((0x0023)<<1) -#define SPIRIT1_STATE_SYNTH_SETUP ((0x0053)<<1) -#define SPIRIT1_STATE_PROTOCOL ((0x001F)<<1) -#define SPIRIT1_STATE_SYNTH_CALIBRATION ((0x004F)<<1) -/*---------------------------------------------------------------------------*/ -/* strobe commands */ -#define SPIRIT1_STROBE_TX 0x60 -#define SPIRIT1_STROBE_RX 0x61 -#define SPIRIT1_STROBE_READY 0x62 -#define SPIRIT1_STROBE_STANDBY 0x63 -#define SPIRIT1_STROBE_SLEEP 0x64 -#define SPIRIT1_STROBE_SABORT 0x67 -#define SPIRIT1_STROBE_SRES 0x70 -#define SPIRIT1_STROBE_FRX 0x71 -#define SPIRIT1_STROBE_FTX 0x72 -/*---------------------------------------------------------------------------*/ - - - -/* Exported types ------------------------------------------------------------*/ -/*------------------------------------------------------------------*/ - - -#endif /* __SPIRIT1_CONST_H__ */ -/*---------------------------------------------------------------------------*/
X-NUCLEO-IDS01A4 Sub-1GHz RF Expansion Board