Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.
Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo
Currently supported boards:
Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:
- Unmount resistor
R4 - Mount resistor
R7
Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!
This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).
Diff: libs/Contiki_STM32_Library/ip64-conf.h
- Revision:
- 34:edda6a7238ec
- Parent:
- 33:c226804be492
- Child:
- 35:f3f444c379d0
--- a/libs/Contiki_STM32_Library/ip64-conf.h Mon Nov 21 13:26:17 2016 +0100 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,97 +0,0 @@ -/* - * Copyright (c) 2012, Thingsquare, http://www.thingsquare.com/. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * 3. Neither the name of the copyright holder nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - * - */ -#ifndef IP64_CONF_H -#define IP64_CONF_H - -/* -#include "ip64-tap-driver.h" -#include "ip64-eth-interface.h" - -#define IP64_CONF_UIP_FALLBACK_INTERFACE ip64_eth_interface -#define IP64_CONF_INPUT ip64_eth_interface_input - -#define IP64_CONF_ETH_DRIVER ip64_tap_driver - - -#undef UIP_FALLBACK_INTERFACE -#define UIP_FALLBACK_INTERFACE ip64_uip_fallback_interface -*/ -#ifdef MY_DRIVERS -#include <my_wifi_interface.h> -#include <my_wifi_driver.h> - -#define IP64_CONF_UIP_FALLBACK_INTERFACE_SLIP 0 -#define IP64_CONF_UIP_FALLBACK_INTERFACE my_wifi_interface -#define IP64_CONF_INPUT my_wifi_interface_input -#define IP64_CONF_ETH_DRIVER my_wifi_driver - -#undef UIP_CONF_ND6_RA_RDNSS -#define UIP_CONF_ND6_RA_RDNSS 1 - -#undef UIP_CONF_ND6_SEND_RA -#define UIP_CONF_ND6_SEND_RA 1 - -#undef UIP_CONF_ROUTER -#define UIP_CONF_ROUTER 1 - -#ifndef QUEUEBUF_CONF_NUM -#define QUEUEBUF_CONF_NUM 16 -#endif - - -#else - - -#include "net/ip64/ip64-slip-interface.h" -#include "net/ip64/ip64-null-driver.h" - -#define IP64_CONF_UIP_FALLBACK_INTERFACE_SLIP 1 -#define IP64_CONF_UIP_FALLBACK_INTERFACE ip64_slip_interface -#define IP64_CONF_INPUT ip64_slip_interface_input -#define IP64_CONF_ETH_DRIVER ip64_null_driver - -#undef UIP_CONF_ND6_RA_RDNSS -#define UIP_CONF_ND6_RA_RDNSS 1 - -#undef UIP_CONF_ND6_SEND_RA -#define UIP_CONF_ND6_SEND_RA 1 - -#undef UIP_CONF_ROUTER -#define UIP_CONF_ROUTER 1 - -#ifndef QUEUEBUF_CONF_NUM -#define QUEUEBUF_CONF_NUM 16 -#endif - -#endif//MY_DRIVERS - -#endif /* IP64_CONF_H */
X-NUCLEO-IDS01A4 Sub-1GHz RF Expansion Board