ST / stm-spirit1-rf-driver

Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.

Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo

Currently supported boards:

Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:

  • Unmount resistor R4
  • Mount resistor R7

Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!

This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).

Diff: mbed_driver_api.cpp

Revision:
32:e5272bafeeea
Parent:
30:9c6dcfc47619
Child:
33:c226804be492
--- a/mbed_driver_api.cpp	Mon Nov 21 09:41:37 2016 +0100
+++ b/mbed_driver_api.cpp	Mon Nov 21 10:04:43 2016 +0100
@@ -1,6 +1,7 @@
 #include "SimpleSpirit1.h"
 #include "nanostack/platform/arm_hal_phy.h"
 #include "platform/arm_hal_interrupt.h"
+#include "driverRFPhy.h"
 
 #include "mbed_trace.h"
 #define TRACE_GROUP  "SPIRIT"
@@ -11,16 +12,6 @@
 /* Define beyond macro if you want to use acknowledgment frames with only 3 bytes */
 #define SHORT_ACK_FRAMES
 
-/*Atmel RF Part Type*/
-// betzw - TODO
-typedef enum
-{
-    ATMEL_UNKNOW_DEV = 0,
-    ATMEL_AT86RF212,
-    ATMEL_AT86RF231,
-    ATMEL_AT86RF233
-}rf_trx_part_e;
-
 static uint8_t mac_address[8] = {
 		MBED_CONF_SPIRIT1_MAC_ADDRESS_0,
 		MBED_CONF_SPIRIT1_MAC_ADDRESS_1,