ST / stm-spirit1-rf-driver

Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.

Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo

Currently supported boards:

Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:

  • Unmount resistor R4
  • Mount resistor R7

Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!

This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).

Diff: atmel-rf-driver/driverRFPhy.h

Revision:
32:e5272bafeeea
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/atmel-rf-driver/driverRFPhy.h	Mon Nov 21 10:04:43 2016 +0100
@@ -0,0 +1,41 @@
+/*
+ * Copyright (c) 2014-2015 ARM Limited. All rights reserved.
+ * SPDX-License-Identifier: Apache-2.0
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef DRIVERRFPHY_H_
+#define DRIVERRFPHY_H_
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "nanostack/platform/arm_hal_phy.h"
+	
+/*Atmel RF Part Type*/
+typedef enum {
+	ATMEL_UNKNOW_DEV = 0,
+	ATMEL_AT86RF212,
+	ATMEL_AT86RF231,
+	ATMEL_AT86RF233
+}rf_trx_part_e;
+	
+extern int8_t rf_device_register(void);
+extern rf_trx_part_e rf_radio_type_read(void);
+extern void rf_read_mac_address(uint8_t *ptr);
+extern int8_t rf_read_random(void);
+	
+#ifdef __cplusplus
+}
+#endif
+#endif /* DRIVERRFPHY_H_ */