ST / stm-spirit1-rf-driver

Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.

Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo

Currently supported boards:

Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:

  • Unmount resistor R4
  • Mount resistor R7

Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!

This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).

Diff: source/libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_Irq.h

Revision:
49:d017830c0c67
Parent:
45:2d01cc9bc761
Child:
67:93bec0baf1de
--- a/source/libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_Irq.h	Thu Jan 12 08:20:43 2017 +0100
+++ b/source/libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_Irq.h	Mon Feb 06 08:53:03 2017 +0100
@@ -207,7 +207,6 @@
 	  SpiritFlagStatus  IRQ_TX_FIFO_ERROR:1;            /*!< IRQ: TX FIFO underflow/overflow error */
 	  SpiritFlagStatus  IRQ_RX_FIFO_ERROR:1;            /*!< IRQ: RX FIFO underflow/overflow error */
 	  SpiritFlagStatus  IRQ_TX_FIFO_ALMOST_FULL:1;      /*!< IRQ: TX FIFO almost full */
-
 } SpiritIrqs;
 
 // betzw: uint32_t masks