Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.

Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo

Currently supported boards:

Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:

  • Unmount resistor R4
  • Mount resistor R7

Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!

This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).

Revision:
67:93bec0baf1de
Parent:
34:edda6a7238ec
--- a/source/libs/spirit1/SPIRIT1_Library/Src/SPIRIT_DirectRF.c	Wed Jul 05 14:02:16 2017 +0200
+++ b/source/libs/spirit1/SPIRIT1_Library/Src/SPIRIT_DirectRF.c	Thu Jul 06 11:13:31 2017 +0200
@@ -1,215 +1,215 @@
-/**
-  ******************************************************************************
-  * @file    SPIRIT_DirectRF.c
-  * @author  VMA division - AMS
-  * @version 3.2.2
-  * @date    08-July-2015
-  * @brief   Configuration and management of SPIRIT direct transmission / receive modes.
-  * @details
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "SPIRIT_DirectRF.h"
-#include "MCU_Interface.h"
-
-
-
-/**
- * @addtogroup SPIRIT_Libraries
- * @{
- */
-
-
-/**
- * @addtogroup SPIRIT_DirectRf
- * @{
- */
-
-
-/**
- * @defgroup DirectRf_Private_TypesDefinitions          Direct RF Private Types Definitions
- * @{
- */
-
-/**
- *@}
- */
-
-
-/**
- * @defgroup DirectRf_Private_Defines                   Direct RF Private Defines
- * @{
- */
-
-/**
- *@}
- */
-
-
-/**
- * @defgroup DirectRf_Private_Macros                    Direct RF Private Macros
- * @{
- */
-
-/**
- *@}
- */
-
-
-/**
- * @defgroup DirectRf_Private_Variables                 Direct RF Private Variables
- * @{
- */
-
-/**
- *@}
- */
-
-
-
-/**
- * @defgroup DirectRf_Private_FunctionPrototypes        Direct RF Private Function Prototypes
- * @{
- */
-
-/**
- *@}
- */
-
-
-/**
- * @defgroup DirectRf_Private_Functions                 Direct RF Private Functions
- * @{
- */
-
-/**
- * @brief  Sets the DirectRF RX mode of SPIRIT.
- * @param  xDirectRx code of the desired mode.
- *         This parameter can be any value of @ref DirectRx.
- * @retval None.
- */
-void SpiritDirectRfSetRxMode(DirectRx xDirectRx)
-{
-  uint8_t tempRegValue;
-
-  /* Check the parameters */
-  s_assert_param(IS_DIRECT_RX(xDirectRx));
-
-  /* Reads the register value */
-  SpiritSpiReadRegisters(PCKTCTRL3_BASE, 1, &tempRegValue);
-
-  /* Build the value to be stored */
-  tempRegValue &= ~PCKTCTRL3_RX_MODE_MASK;
-  tempRegValue |= (uint8_t)xDirectRx;
-
-  /* Writes value on register */
-  g_xStatus = SpiritSpiWriteRegisters(PCKTCTRL3_BASE, 1, &tempRegValue);
-
-}
-
-
-/**
- * @brief  Returns the DirectRF RX mode of SPIRIT.
- * @param  None.
- * @retval DirectRx Direct Rx mode.
- */
-DirectRx SpiritDirectRfGetRxMode(void)
-{
-  uint8_t tempRegValue;
-
-  /* Reads the register value and mask the RX_Mode field */
-  g_xStatus = SpiritSpiReadRegisters(PCKTCTRL3_BASE, 1, &tempRegValue);
-
-  /* Rebuild and return value */
-  return (DirectRx)(tempRegValue & 0x30);
-
-}
-
-
-/**
- * @brief  Sets the TX mode of SPIRIT.
- * @param  xDirectTx code of the desired source.
- *         This parameter can be any value of @ref DirectTx.
- * @retval None.
- */
-void SpiritDirectRfSetTxMode(DirectTx xDirectTx)
-{
-  uint8_t tempRegValue;
-
-  /* Check the parameters */
-  s_assert_param(IS_DIRECT_TX(xDirectTx));
-
-  /* Reads the register value */
-  SpiritSpiReadRegisters(PCKTCTRL1_BASE, 1, &tempRegValue);
-
-  /* Build the value to be stored */
-  tempRegValue &= ~PCKTCTRL1_TX_SOURCE_MASK;
-  tempRegValue |= (uint8_t)xDirectTx;
-
-  /* Writes value on register */
-  g_xStatus = SpiritSpiWriteRegisters(PCKTCTRL1_BASE, 1, &tempRegValue);
-
-}
-
-
-/**
- * @brief  Returns the DirectRF TX mode of SPIRIT.
- * @param  None.
- * @retval DirectTx Direct Tx mode.
- */
-DirectTx SpiritDirectRfGetTxMode(void)
-{
-  uint8_t tempRegValue;
-
-  /* Reads the register value and mask the RX_Mode field */
-  g_xStatus = SpiritSpiReadRegisters(PCKTCTRL1_BASE, 1, &tempRegValue);
-
-  /* Returns value */
-  return (DirectTx)(tempRegValue & 0x0C);
-
-}
-
-
-/**
- *@}
- */
-
-/**
- *@}
- */
-
-
-/**
- *@}
- */
-
-
-
-/******************* (C) COPYRIGHT 2015 STMicroelectronics *****END OF FILE****/
+/**
+  ******************************************************************************
+  * @file    SPIRIT_DirectRF.c
+  * @author  VMA division - AMS
+  * @version 3.2.2
+  * @date    08-July-2015
+  * @brief   Configuration and management of SPIRIT direct transmission / receive modes.
+  * @details
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "SPIRIT_DirectRF.h"
+#include "MCU_Interface.h"
+
+
+
+/**
+ * @addtogroup SPIRIT_Libraries
+ * @{
+ */
+
+
+/**
+ * @addtogroup SPIRIT_DirectRf
+ * @{
+ */
+
+
+/**
+ * @defgroup DirectRf_Private_TypesDefinitions          Direct RF Private Types Definitions
+ * @{
+ */
+
+/**
+ *@}
+ */
+
+
+/**
+ * @defgroup DirectRf_Private_Defines                   Direct RF Private Defines
+ * @{
+ */
+
+/**
+ *@}
+ */
+
+
+/**
+ * @defgroup DirectRf_Private_Macros                    Direct RF Private Macros
+ * @{
+ */
+
+/**
+ *@}
+ */
+
+
+/**
+ * @defgroup DirectRf_Private_Variables                 Direct RF Private Variables
+ * @{
+ */
+
+/**
+ *@}
+ */
+
+
+
+/**
+ * @defgroup DirectRf_Private_FunctionPrototypes        Direct RF Private Function Prototypes
+ * @{
+ */
+
+/**
+ *@}
+ */
+
+
+/**
+ * @defgroup DirectRf_Private_Functions                 Direct RF Private Functions
+ * @{
+ */
+
+/**
+ * @brief  Sets the DirectRF RX mode of SPIRIT.
+ * @param  xDirectRx code of the desired mode.
+ *         This parameter can be any value of @ref DirectRx.
+ * @retval None.
+ */
+void SpiritDirectRfSetRxMode(DirectRx xDirectRx)
+{
+  uint8_t tempRegValue;
+
+  /* Check the parameters */
+  s_assert_param(IS_DIRECT_RX(xDirectRx));
+
+  /* Reads the register value */
+  SpiritSpiReadRegisters(PCKTCTRL3_BASE, 1, &tempRegValue);
+
+  /* Build the value to be stored */
+  tempRegValue &= ~PCKTCTRL3_RX_MODE_MASK;
+  tempRegValue |= (uint8_t)xDirectRx;
+
+  /* Writes value on register */
+  g_xStatus = SpiritSpiWriteRegisters(PCKTCTRL3_BASE, 1, &tempRegValue);
+
+}
+
+
+/**
+ * @brief  Returns the DirectRF RX mode of SPIRIT.
+ * @param  None.
+ * @retval DirectRx Direct Rx mode.
+ */
+DirectRx SpiritDirectRfGetRxMode(void)
+{
+  uint8_t tempRegValue;
+
+  /* Reads the register value and mask the RX_Mode field */
+  g_xStatus = SpiritSpiReadRegisters(PCKTCTRL3_BASE, 1, &tempRegValue);
+
+  /* Rebuild and return value */
+  return (DirectRx)(tempRegValue & 0x30);
+
+}
+
+
+/**
+ * @brief  Sets the TX mode of SPIRIT.
+ * @param  xDirectTx code of the desired source.
+ *         This parameter can be any value of @ref DirectTx.
+ * @retval None.
+ */
+void SpiritDirectRfSetTxMode(DirectTx xDirectTx)
+{
+  uint8_t tempRegValue;
+
+  /* Check the parameters */
+  s_assert_param(IS_DIRECT_TX(xDirectTx));
+
+  /* Reads the register value */
+  SpiritSpiReadRegisters(PCKTCTRL1_BASE, 1, &tempRegValue);
+
+  /* Build the value to be stored */
+  tempRegValue &= ~PCKTCTRL1_TX_SOURCE_MASK;
+  tempRegValue |= (uint8_t)xDirectTx;
+
+  /* Writes value on register */
+  g_xStatus = SpiritSpiWriteRegisters(PCKTCTRL1_BASE, 1, &tempRegValue);
+
+}
+
+
+/**
+ * @brief  Returns the DirectRF TX mode of SPIRIT.
+ * @param  None.
+ * @retval DirectTx Direct Tx mode.
+ */
+DirectTx SpiritDirectRfGetTxMode(void)
+{
+  uint8_t tempRegValue;
+
+  /* Reads the register value and mask the RX_Mode field */
+  g_xStatus = SpiritSpiReadRegisters(PCKTCTRL1_BASE, 1, &tempRegValue);
+
+  /* Returns value */
+  return (DirectTx)(tempRegValue & 0x0C);
+
+}
+
+
+/**
+ *@}
+ */
+
+/**
+ *@}
+ */
+
+
+/**
+ *@}
+ */
+
+
+
+/******************* (C) COPYRIGHT 2015 STMicroelectronics *****END OF FILE****/