Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.

Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo

Currently supported boards:

Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:

  • Unmount resistor R4
  • Mount resistor R7

Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!

This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).

Revision:
67:93bec0baf1de
Parent:
34:edda6a7238ec
--- a/source/libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_PktMbus.h	Wed Jul 05 14:02:16 2017 +0200
+++ b/source/libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_PktMbus.h	Thu Jul 06 11:13:31 2017 +0200
@@ -1,206 +1,206 @@
-/**
-  ******************************************************************************
- * @file    SPIRIT_PktMbus.h
-  * @author  VMA division - AMS
-  * @version 3.2.2
-  * @date    08-July-2015
- * @brief   Configuration and management of SPIRIT MBUS packets.
-  * 
- * @details
- *
- * This module can be used to manage the configuration of Spirit MBUS
- * packets.
- * The user can obtain a packet configuration filling the structure
- * <i>@ref PktMbusInit</i>, defining in it some general parameters
- * for the Spirit MBUS packet format.
- * Since the MBUS protocol is a standard, the configuration of a MBUS
- * packet is very simple to do.
- *
- * <b>Example:</b>
- * @code
- *
- * PktMbusInit mbusInit={
- *   MBUS_SUBMODE_S1_S2_LONG_HEADER,    // MBUS submode selection
- *   36,                                // added "01" chips on preamble
- *   16                                 // postamble length in "01" chips
- * };
- *
- * ...
- *
- * SpiritPktMbusInit(&mbusInit);
- *
- * ...
- *
- * @endcode
- *
- * The module provides some other functions that can be used to modify
- * or read only some configuration parameters.
- *
- *
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __SPIRIT_PACKET_MBUS_H
-#define __SPIRIT_PACKET_MBUS_H
-
-
-
-/* Includes ------------------------------------------------------------------*/
-
-#include "SPIRIT_Regs.h"
-#include "SPIRIT_Types.h"
-#include "SPIRIT_PktCommon.h"
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-
-
-/**
- * @addtogroup SPIRIT_Libraries
- * @{
- */
-
-
-/**
- * @defgroup SPIRIT_PktMbus     Pkt MBUS
- * @brief Configuration and management of SPIRIT MBUS packets.
- * @details See the file <i>@ref SPIRIT_PktMbus.h</i> for more details.
- * @{
- */
-
-/**
- * @defgroup PktMbus_Exported_Types     Pkt MBUS Exported Types
- * @{
- */
-
-
-
-/**
- * @brief  MBUS submode enumeration.
- */
-
-typedef enum
-{
-  MBUS_SUBMODE_S1_S2_LONG_HEADER            = MBUS_CTRL_MBUS_SUBMODE_S1_S2L,                /*!< MBUS submode S1, S2 (long header) - Header length = mbus_prmbl_ctrl + 279 (in "01" bit pairs) , Sync word = 0x7696 (length 18 bits) */
-  MBUS_SUBMODE_S1_M_S2_T2_OTHER_TO_METER    = MBUS_CTRL_MBUS_SUBMODE_S2_S1M_T2_OTHER,       /*!< MBUS submode S1-m, S2, T2 (other to meter) - Header length = mbus_prmbl_ctrl + 15 (in "01" bit pairs) , Sync word = 0x7696 (length 18 bits)*/
-  MBUS_SUBMODE_T1_T2_METER_TO_OTHER         = MBUS_CTRL_MBUS_SUBMODE_T1_T2_METER,           /*!< MBUS submode T1, T2 (meter to other) - Header length = mbus_prmbl_ctrl + 19 (in "01" bit pairs) ,  Sync word = 0x3D (length 10 bits)*/
-  MBUS_SUBMODE_R2_SHORT_HEADER              = MBUS_CTRL_MBUS_SUBMODE_R2,                    /*!< MBUS submode R2, short header - Header length = mbus_prmbl_ctrl + 39 (in "01" bit pairs) , Sync word = 0x7696 (length 18 bits)*/
-
-}MbusSubmode;
-
-#define IS_MBUS_SUBMODE(MODE)   (((MODE) == MBUS_SUBMODE_S1_S2_LONG_HEADER) || \
-                                 ((MODE) == MBUS_SUBMODE_S1_M_S2_T2_OTHER_TO_METER) || \
-                                 ((MODE) == MBUS_SUBMODE_T1_T2_METER_TO_OTHER) || \
-                                 ((MODE) == MBUS_SUBMODE_R2_SHORT_HEADER))
-
-
-/**
- * @brief  SPIRIT MBUS Packet Init structure definition
- */
-typedef struct
-{
-  MbusSubmode  	    xMbusSubmode;              /*!< Specifies the SUBMODE to be configured.
-                                                    This parameter can be a value of @ref MbusSubmode */
-
-  uint8_t           cPreambleLength;           /*!< Specifies the PREAMBLE length.
-                                                    This parameter can be any value between 0 and 255 chip sequence '01' */
-
-  uint8_t           cPostambleLength;          /*!< Specifies the POSTAMBLE length.
-                                                    This parameter can be any value between 0 and 255 chip sequence '01' */
-
-}PktMbusInit;
-
-/**
- *@}
- */
-
-
-/**
- * @defgroup PktMbus_Exported_Constants         Pkt MBUS Exported Constants
- * @{
- */
-
-
-/**
- *@}
- */
-
-
-/**
- * @defgroup PktMbus_Exported_Macros            Pkt MBUS Exported Macros
- * @{
- */
-
-
-/**
- *@}
- */
-
-
-/**
- * @defgroup PktMbus_Exported_Functions                 Pkt MBUS Exported Functions
- * @{
- */
-void SpiritPktMbusInit(PktMbusInit* pxPktMbusInit);
-void SpiritPktMbusGetInfo(PktMbusInit* pxPktMbusInit);
-void SpiritPktMbusSetFormat(void);
-void SpiritPktMbusSetPreamble(uint8_t cPreamble);
-uint8_t SpiritPktMbusGetPreamble(void);
-void SpiritPktMbusSetPostamble(uint8_t cPostamble);
-uint8_t SpiritPktMbusGetPostamble(void);
-void SpiritPktMbusSetSubmode(MbusSubmode xMbusSubmode);
-MbusSubmode SpiritPktMbusGetSubmode(void);
-void SpiritPktMbusSetPayloadLength(uint16_t nPayloadLength);
-uint16_t SpiritPktMbusGetPayloadLength(void);
-
-
-/**
- *@}
- */
-
-/**
- *@}
- */
-
-
-/**
- *@}
- */
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
-
-/******************* (C) COPYRIGHT 2015 STMicroelectronics *****END OF FILE****/
+/**
+  ******************************************************************************
+ * @file    SPIRIT_PktMbus.h
+  * @author  VMA division - AMS
+  * @version 3.2.2
+  * @date    08-July-2015
+ * @brief   Configuration and management of SPIRIT MBUS packets.
+  * 
+ * @details
+ *
+ * This module can be used to manage the configuration of Spirit MBUS
+ * packets.
+ * The user can obtain a packet configuration filling the structure
+ * <i>@ref PktMbusInit</i>, defining in it some general parameters
+ * for the Spirit MBUS packet format.
+ * Since the MBUS protocol is a standard, the configuration of a MBUS
+ * packet is very simple to do.
+ *
+ * <b>Example:</b>
+ * @code
+ *
+ * PktMbusInit mbusInit={
+ *   MBUS_SUBMODE_S1_S2_LONG_HEADER,    // MBUS submode selection
+ *   36,                                // added "01" chips on preamble
+ *   16                                 // postamble length in "01" chips
+ * };
+ *
+ * ...
+ *
+ * SpiritPktMbusInit(&mbusInit);
+ *
+ * ...
+ *
+ * @endcode
+ *
+ * The module provides some other functions that can be used to modify
+ * or read only some configuration parameters.
+ *
+ *
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __SPIRIT_PACKET_MBUS_H
+#define __SPIRIT_PACKET_MBUS_H
+
+
+
+/* Includes ------------------------------------------------------------------*/
+
+#include "SPIRIT_Regs.h"
+#include "SPIRIT_Types.h"
+#include "SPIRIT_PktCommon.h"
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+
+
+/**
+ * @addtogroup SPIRIT_Libraries
+ * @{
+ */
+
+
+/**
+ * @defgroup SPIRIT_PktMbus     Pkt MBUS
+ * @brief Configuration and management of SPIRIT MBUS packets.
+ * @details See the file <i>@ref SPIRIT_PktMbus.h</i> for more details.
+ * @{
+ */
+
+/**
+ * @defgroup PktMbus_Exported_Types     Pkt MBUS Exported Types
+ * @{
+ */
+
+
+
+/**
+ * @brief  MBUS submode enumeration.
+ */
+
+typedef enum
+{
+  MBUS_SUBMODE_S1_S2_LONG_HEADER            = MBUS_CTRL_MBUS_SUBMODE_S1_S2L,                /*!< MBUS submode S1, S2 (long header) - Header length = mbus_prmbl_ctrl + 279 (in "01" bit pairs) , Sync word = 0x7696 (length 18 bits) */
+  MBUS_SUBMODE_S1_M_S2_T2_OTHER_TO_METER    = MBUS_CTRL_MBUS_SUBMODE_S2_S1M_T2_OTHER,       /*!< MBUS submode S1-m, S2, T2 (other to meter) - Header length = mbus_prmbl_ctrl + 15 (in "01" bit pairs) , Sync word = 0x7696 (length 18 bits)*/
+  MBUS_SUBMODE_T1_T2_METER_TO_OTHER         = MBUS_CTRL_MBUS_SUBMODE_T1_T2_METER,           /*!< MBUS submode T1, T2 (meter to other) - Header length = mbus_prmbl_ctrl + 19 (in "01" bit pairs) ,  Sync word = 0x3D (length 10 bits)*/
+  MBUS_SUBMODE_R2_SHORT_HEADER              = MBUS_CTRL_MBUS_SUBMODE_R2,                    /*!< MBUS submode R2, short header - Header length = mbus_prmbl_ctrl + 39 (in "01" bit pairs) , Sync word = 0x7696 (length 18 bits)*/
+
+}MbusSubmode;
+
+#define IS_MBUS_SUBMODE(MODE)   (((MODE) == MBUS_SUBMODE_S1_S2_LONG_HEADER) || \
+                                 ((MODE) == MBUS_SUBMODE_S1_M_S2_T2_OTHER_TO_METER) || \
+                                 ((MODE) == MBUS_SUBMODE_T1_T2_METER_TO_OTHER) || \
+                                 ((MODE) == MBUS_SUBMODE_R2_SHORT_HEADER))
+
+
+/**
+ * @brief  SPIRIT MBUS Packet Init structure definition
+ */
+typedef struct
+{
+  MbusSubmode  	    xMbusSubmode;              /*!< Specifies the SUBMODE to be configured.
+                                                    This parameter can be a value of @ref MbusSubmode */
+
+  uint8_t           cPreambleLength;           /*!< Specifies the PREAMBLE length.
+                                                    This parameter can be any value between 0 and 255 chip sequence '01' */
+
+  uint8_t           cPostambleLength;          /*!< Specifies the POSTAMBLE length.
+                                                    This parameter can be any value between 0 and 255 chip sequence '01' */
+
+}PktMbusInit;
+
+/**
+ *@}
+ */
+
+
+/**
+ * @defgroup PktMbus_Exported_Constants         Pkt MBUS Exported Constants
+ * @{
+ */
+
+
+/**
+ *@}
+ */
+
+
+/**
+ * @defgroup PktMbus_Exported_Macros            Pkt MBUS Exported Macros
+ * @{
+ */
+
+
+/**
+ *@}
+ */
+
+
+/**
+ * @defgroup PktMbus_Exported_Functions                 Pkt MBUS Exported Functions
+ * @{
+ */
+void SpiritPktMbusInit(PktMbusInit* pxPktMbusInit);
+void SpiritPktMbusGetInfo(PktMbusInit* pxPktMbusInit);
+void SpiritPktMbusSetFormat(void);
+void SpiritPktMbusSetPreamble(uint8_t cPreamble);
+uint8_t SpiritPktMbusGetPreamble(void);
+void SpiritPktMbusSetPostamble(uint8_t cPostamble);
+uint8_t SpiritPktMbusGetPostamble(void);
+void SpiritPktMbusSetSubmode(MbusSubmode xMbusSubmode);
+MbusSubmode SpiritPktMbusGetSubmode(void);
+void SpiritPktMbusSetPayloadLength(uint16_t nPayloadLength);
+uint16_t SpiritPktMbusGetPayloadLength(void);
+
+
+/**
+ *@}
+ */
+
+/**
+ *@}
+ */
+
+
+/**
+ *@}
+ */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+/******************* (C) COPYRIGHT 2015 STMicroelectronics *****END OF FILE****/