Diff: source/libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_Irq.h

Revision:

67:93bec0baf1de

Parent:

49:d017830c0c67

--- a/source/libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_Irq.h	Wed Jul 05 14:02:16 2017 +0200
+++ b/source/libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_Irq.h	Thu Jul 06 11:13:31 2017 +0200
@@ -1,357 +1,357 @@
-/**
-  ******************************************************************************
- * @file    SPIRIT_Irq.h
-  * @author  VMA division - AMS
-  * @version 3.2.2
-  * @date    08-July-2015
- * @brief   Configuration and management of SPIRIT IRQs.
-  * 
- * @details
- *
- * On the Spirit side specific IRQs can be enabled by setting a specific bitmask.
- * The Spirit libraries allow the user to do this in two different ways:
- * <ul>
- *
- * <li>The first enables the IRQs one by one, i.e. using an SPI transaction for each
- * IRQ to enable.
- *
- * <b>Example:</b>
- * @code
- *
- *  SpiritIrqDeInit(NULL);                // this call is used to reset the IRQ mask registers
- *  SpiritIrq(RX_DATA_READY , S_ENABLE);
- *  SpiritIrq(VALID_SYNC , S_ENABLE);
- *  SpiritIrq(RX_TIMEOUT , S_ENABLE);
- *
- * @endcode
- *
- * </li>
- *
- * <li>The second strategy is to set the IRQ bitfields structure. So, during the initialization the user
- * has to fill the @ref SpiritIrqs structure setting to one the single field related to the IRQ he
- * wants to enable, and to zero the single field related to all the IRQs he wants to disable.
- *
- * <b>Example:</b>
- * @code
- *
- *  SpiritIrqs irqMask;
- *
- *  ...
- *
- *  SpiritIrqDeInit(&irqMask);                // this call is used to reset the IRQ mask registers
- *                                            // and to set to 0x00000000 the irq mask in order to disable
- *                                            // all IRQs (disabled by default on startup)
- *  irqMask.IRQ_RX_DATA_READY = 1;
- *  irqMask.IRQ_VALID_SYNC = 1;
- *  irqMask.IRQ_RX_TIMEOUT = 1;
- *
- *  ...
- * @endcode
- * </li>
- * </ul>
- *
- * The most applications will require a Spirit IRQ notification on an microcontroller EXTI line.
- * Then, the user can check which IRQ has been raised using two different ways.
- *
- * On the ISR of the EXTI line phisically linked to the Spirit pin configured for IRQ:
- *
- * <ul>
- * <li> Check <b>only one</b> Spirit IRQ (because the Spirit IRQ status register automatically blanks itself
- * after an SPI reading) into the ISR.
- *
- * <b>Example:</b>
- * @code
- *
- *  if(SpiritIrqCheckFlag(RX_DATA_READY))
- *  {
- *          // do something...
- *  }
- *
- * @endcode
- * </li>
- *
- * <li> Check more than one Spirit IRQ status by storing the entire IRQ status registers into a bitfields <i>@ref SpiritIrqs</i> structure
- * and then check the interested bits.
- *
- * <b>Example:</b>
- * @code
- *
- *  SpiritIrqGetStatus(&irqStatus);
- *
- *  if(irqStatus.IRQ_RX_DATA_READY)
- *  {
- *          // do something...
- *  }
- *  if(irqStatus.IRQ_VALID_SYNC)
- *  {
- *         // do something...
- *  }
- *  if(irqStatus.RX_TIMEOUT)
- *  {
- *         // do something...
- *  }
- *
- * @endcode
- * </li>
- * </ul>
- *
-
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __SPIRIT1_IRQ_H
-#define __SPIRIT1_IRQ_H
-
-
-/* Includes ------------------------------------------------------------------*/
-
-#include "SPIRIT_Regs.h"
-#include "SPIRIT_Types.h"
-
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-
-/**
- * @addtogroup SPIRIT_Libraries
- * @{
- */
-
-
-/**
- * @defgroup SPIRIT_Irq IRQ
- * @brief Configuration and management of SPIRIT IRQs.
- * @details See the file <i>@ref SPIRIT_Irq.h</i> for more details.
- * @{
- */
-
-/**
- * @defgroup Irq_Exported_Types IRQ Exported Types
- * @{
- */
-
-
-/**
- * @brief IRQ bitfield structure for SPIRIT. This structure is used to read or write the single IRQ bit.
- *        During the initialization the user has to fill this structure setting to one the single field related
- *        to the IRQ he wants to enable, and to zero the single field related to all the IRQs he wants to disable.
- *        The same structure can be used to retrieve all the IRQ events from the IRQ registers IRQ_STATUS[3:0],
- *        and read if one or more specific IRQ raised.
- * @note  The fields order in the structure depends on used endianness (little or big
- *        endian). The actual definition is valid ONLY for LITTLE ENDIAN mode. Be sure to
- *        change opportunely the fields order when use a different endianness.
- */
-typedef struct
-{
-	  SpiritFlagStatus  IRQ_SYNTH_LOCK_TIMEOUT:1;       /*!< IRQ: only for debug; LOCK state timeout */
-	  SpiritFlagStatus  IRQ_SYNTH_LOCK_STARTUP:1;       /*!< IRQ: only for debug; see CALIBR_START_COUNTER */
-	  SpiritFlagStatus  IRQ_SYNTH_CAL_TIMEOUT:1;        /*!< IRQ: only for debug; SYNTH calibration timeout */
-	  SpiritFlagStatus  IRQ_TX_START_TIME:1;            /*!< IRQ: only for debug; TX circuitry startup time; see TX_START_COUNTER */
-	  SpiritFlagStatus  IRQ_RX_START_TIME:1;            /*!< IRQ: only for debug; RX circuitry startup time; see TX_START_COUNTER */
-	  SpiritFlagStatus  IRQ_RX_TIMEOUT:1;               /*!< IRQ: RX operation timeout */
-	  SpiritFlagStatus  IRQ_AES_END:1;                  /*!< IRQ: AES End of operation */
-	  SpiritFlagStatus  reserved:1;                     /*!< Reserved bit */
-
-	  SpiritFlagStatus  IRQ_READY:1;                    /*!< IRQ: READY state */
-	  SpiritFlagStatus  IRQ_STANDBY_DELAYED:1;          /*!< IRQ: STANDBY state after MCU_CK_CONF_CLOCK_TAIL_X clock cycles */
-	  SpiritFlagStatus  IRQ_LOW_BATT_LVL:1;             /*!< IRQ: Battery level below threshold*/
-	  SpiritFlagStatus  IRQ_POR:1;                      /*!< IRQ: Power On Reset */
-	  SpiritFlagStatus  IRQ_BOR:1;                      /*!< IRQ: Brown out event (both accurate and inaccurate)*/
-	  SpiritFlagStatus  IRQ_LOCK:1;                     /*!< IRQ: LOCK state */
-	  SpiritFlagStatus  IRQ_PM_COUNT_EXPIRED:1;         /*!< IRQ: only for debug; Power Management startup timer expiration (see reg PM_START_COUNTER, 0xB5) */
-	  SpiritFlagStatus  IRQ_XO_COUNT_EXPIRED:1;         /*!< IRQ: only for debug; Crystal oscillator settling time counter expired */
-
-	  SpiritFlagStatus  IRQ_TX_FIFO_ALMOST_EMPTY:1;     /*!< IRQ: TX FIFO almost empty */
-	  SpiritFlagStatus  IRQ_RX_FIFO_ALMOST_FULL:1;      /*!< IRQ: RX FIFO almost full */
-	  SpiritFlagStatus  IRQ_RX_FIFO_ALMOST_EMPTY:1;     /*!< IRQ: RX FIFO almost empty  */
-	  SpiritFlagStatus  IRQ_MAX_BO_CCA_REACH:1;         /*!< IRQ: Max number of back-off during CCA */
-	  SpiritFlagStatus  IRQ_VALID_PREAMBLE:1;           /*!< IRQ: Valid preamble detected */
-	  SpiritFlagStatus  IRQ_VALID_SYNC:1;               /*!< IRQ: Sync word detected */
-	  SpiritFlagStatus  IRQ_RSSI_ABOVE_TH:1;            /*!< IRQ: RSSI above threshold */
-	  SpiritFlagStatus  IRQ_WKUP_TOUT_LDC:1;            /*!< IRQ: Wake-up timeout in LDC mode */
-
-	  SpiritFlagStatus  IRQ_RX_DATA_READY:1;            /*!< IRQ: RX data ready */
-	  SpiritFlagStatus  IRQ_RX_DATA_DISC:1;             /*!< IRQ: RX data discarded (upon filtering) */
-	  SpiritFlagStatus  IRQ_TX_DATA_SENT:1;             /*!< IRQ: TX data sent */
-	  SpiritFlagStatus  IRQ_MAX_RE_TX_REACH:1;          /*!< IRQ: Max re-TX reached */
-	  SpiritFlagStatus  IRQ_CRC_ERROR:1;                /*!< IRQ: CRC error */
-	  SpiritFlagStatus  IRQ_TX_FIFO_ERROR:1;            /*!< IRQ: TX FIFO underflow/overflow error */
-	  SpiritFlagStatus  IRQ_RX_FIFO_ERROR:1;            /*!< IRQ: RX FIFO underflow/overflow error */
-	  SpiritFlagStatus  IRQ_TX_FIFO_ALMOST_FULL:1;      /*!< IRQ: TX FIFO almost full */
-} SpiritIrqs;
-
-// betzw: uint32_t masks
-#define IRQ_TX_FIFO_ALMOST_EMPTY_MASK	(0x00010000) /* (1<<16) */
-#define IRQ_RX_FIFO_ALMOST_FULL_MASK	(0x00020000) /* (1<<17) */
-#define IRQ_VALID_SYNC_MASK				(0x00200000) /* (1<<21) */
-#define IRQ_RX_DATA_READY_MASK			(0x01000000) /* (1<<24) */
-#define IRQ_RX_DATA_DISC_MASK			(0x02000000) /* (1<<25) */
-#define IRQ_TX_DATA_SENT_MASK			(0x04000000) /* (1<<26) */
-#define IRQ_TX_FIFO_ERROR_MASK			(0x20000000) /* (1<<29) */
-#define IRQ_RX_FIFO_ERROR_MASK			(0x40000000) /* (1<<30) */
-
-/**
- * @brief  IRQ list enumeration for SPIRIT. This enumeration type can be used to address a
- *         specific IRQ.
- */
-typedef enum
-{
-  RX_DATA_READY = 0x00000001,           /*!< IRQ: RX data ready */
-  RX_DATA_DISC = 0x00000002,            /*!< IRQ: RX data discarded (upon filtering) */
-  TX_DATA_SENT = 0x00000004,            /*!< IRQ: TX data sent */
-  MAX_RE_TX_REACH = 0x00000008,         /*!< IRQ: Max re-TX reached */
-  CRC_ERROR = 0x00000010,               /*!< IRQ: CRC error */
-  TX_FIFO_ERROR = 0x00000020,           /*!< IRQ: TX FIFO underflow/overflow error */
-  RX_FIFO_ERROR = 0x00000040,           /*!< IRQ: RX FIFO underflow/overflow error */
-  TX_FIFO_ALMOST_FULL = 0x00000080,     /*!< IRQ: TX FIFO almost full */
-  TX_FIFO_ALMOST_EMPTY = 0x00000100,    /*!< IRQ: TX FIFO almost empty */
-  RX_FIFO_ALMOST_FULL = 0x00000200,     /*!< IRQ: RX FIFO almost full */
-  RX_FIFO_ALMOST_EMPTY = 0x00000400,    /*!< IRQ: RX FIFO almost empty  */
-  MAX_BO_CCA_REACH = 0x00000800,        /*!< IRQ: Max number of back-off during CCA */
-  VALID_PREAMBLE = 0x00001000,          /*!< IRQ: Valid preamble detected */
-  VALID_SYNC = 0x00002000,              /*!< IRQ: Sync word detected */
-  RSSI_ABOVE_TH = 0x00004000,           /*!< IRQ: RSSI above threshold */
-  WKUP_TOUT_LDC = 0x00008000,           /*!< IRQ: Wake-up timeout in LDC mode */
-  READY = 0x00010000,                   /*!< IRQ: READY state */
-  STANDBY_DELAYED = 0x00020000,         /*!< IRQ: STANDBY state after MCU_CK_CONF_CLOCK_TAIL_X clock cycles */
-  LOW_BATT_LVL = 0x00040000,            /*!< IRQ: Battery level below threshold*/
-  POR = 0x00080000,                     /*!< IRQ: Power On Reset */
-  BOR = 0x00100000,                     /*!< IRQ: Brown out event (both accurate and inaccurate)*/
-  LOCK = 0x00200000,                    /*!< IRQ: LOCK state */
-  PM_COUNT_EXPIRED = 0x00400000,        /*!< IRQ: only for debug; Power Management startup timer expiration (see reg PM_START_COUNTER, 0xB5) */
-  XO_COUNT_EXPIRED = 0x00800000,        /*!< IRQ: only for debug; Crystal oscillator settling time counter expired */
-  SYNTH_LOCK_TIMEOUT = 0x01000000,      /*!< IRQ: only for debug; LOCK state timeout */
-  SYNTH_LOCK_STARTUP = 0x02000000,      /*!< IRQ: only for debug; see CALIBR_START_COUNTER */
-  SYNTH_CAL_TIMEOUT = 0x04000000,       /*!< IRQ: only for debug; SYNTH calibration timeout */
-  TX_START_TIME = 0x08000000,	        /*!< IRQ: only for debug; TX circuitry startup time; see TX_START_COUNTER */
-  RX_START_TIME = 0x10000000,	        /*!< IRQ: only for debug; RX circuitry startup time; see TX_START_COUNTER */
-  RX_TIMEOUT = 0x20000000,	        /*!< IRQ: RX operation timeout */
-  AES_END = 0x40000000,                 /*!< IRQ: AES End of operation */
-  ALL_IRQ = 0x7FFFFFFF			/*!< All the above mentioned IRQs */
-
-} IrqList;
-
-#define IS_SPIRIT_IRQ_LIST(VALUE)   ((VALUE == RX_DATA_READY) || \
-                                     (VALUE == RX_DATA_DISC)  || \
-                                     (VALUE == TX_DATA_SENT)  || \
-                                     (VALUE == MAX_RE_TX_REACH)  || \
-                                     (VALUE == CRC_ERROR)  || \
-                                     (VALUE == TX_FIFO_ERROR)  || \
-                                     (VALUE == RX_FIFO_ERROR)  || \
-                                     (VALUE == TX_FIFO_ALMOST_FULL)  || \
-                                     (VALUE == TX_FIFO_ALMOST_EMPTY)  || \
-                                     (VALUE == RX_FIFO_ALMOST_FULL)  || \
-                                     (VALUE == RX_FIFO_ALMOST_EMPTY)  || \
-                                     (VALUE == MAX_BO_CCA_REACH)  || \
-                                     (VALUE == VALID_PREAMBLE)  || \
-                                     (VALUE == VALID_SYNC)  || \
-                                     (VALUE == RSSI_ABOVE_TH)  || \
-                                     (VALUE == WKUP_TOUT_LDC)  || \
-                                     (VALUE == READY)  || \
-                                     (VALUE == STANDBY_DELAYED)  || \
-                                     (VALUE == LOW_BATT_LVL)  || \
-                                     (VALUE == POR)  || \
-                                     (VALUE == BOR)  || \
-                                     (VALUE == LOCK)  || \
-                                     (VALUE == PM_COUNT_EXPIRED)  || \
-                                     (VALUE == XO_COUNT_EXPIRED)  || \
-                                     (VALUE == SYNTH_LOCK_TIMEOUT)  || \
-                                     (VALUE == SYNTH_LOCK_STARTUP)  || \
-                                     (VALUE == SYNTH_CAL_TIMEOUT)  || \
-                                     (VALUE == TX_START_TIME)  || \
-                                     (VALUE == RX_START_TIME)  || \
-                                     (VALUE == RX_TIMEOUT)  || \
-                                     (VALUE == AES_END)   || \
-				     (VALUE == ALL_IRQ ))
-
-
-/**
- * @}
- */
-
-
-/**
- * @defgroup Irq_Exported_Constants     IRQ Exported Constants
- * @{
- */
-
-
-/**
- * @}
- */
-
-
-/**
- * @defgroup Irq_Exported_Macros        IRQ Exported Macros
- * @{
- */
-
-
-/**
- * @}
- */
-
-
-/**
- * @defgroup Irq_Exported_Functions     IRQ Exported Functions
- * @{
- */
-
-void SpiritIrqDeInit(SpiritIrqs* pxIrqInit);
-void SpiritIrqInit(SpiritIrqs* pxIrqInit);
-void SpiritIrq(IrqList xIrq, SpiritFunctionalState xNewState);
-void SpiritIrqGetMask(SpiritIrqs* pxIrqMask);
-void SpiritIrqGetStatus(SpiritIrqs* pxIrqStatus);
-void SpiritIrqClearStatus(void);
-SpiritBool SpiritIrqCheckFlag(IrqList xFlag);
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-
-/**
- * @}
- */
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
-
-/******************* (C) COPYRIGHT 2015 STMicroelectronics *****END OF FILE****/
+/**
+  ******************************************************************************
+ * @file    SPIRIT_Irq.h
+  * @author  VMA division - AMS
+  * @version 3.2.2
+  * @date    08-July-2015
+ * @brief   Configuration and management of SPIRIT IRQs.
+  * 
+ * @details
+ *
+ * On the Spirit side specific IRQs can be enabled by setting a specific bitmask.
+ * The Spirit libraries allow the user to do this in two different ways:
+ * <ul>
+ *
+ * <li>The first enables the IRQs one by one, i.e. using an SPI transaction for each
+ * IRQ to enable.
+ *
+ * <b>Example:</b>
+ * @code
+ *
+ *  SpiritIrqDeInit(NULL);                // this call is used to reset the IRQ mask registers
+ *  SpiritIrq(RX_DATA_READY , S_ENABLE);
+ *  SpiritIrq(VALID_SYNC , S_ENABLE);
+ *  SpiritIrq(RX_TIMEOUT , S_ENABLE);
+ *
+ * @endcode
+ *
+ * </li>
+ *
+ * <li>The second strategy is to set the IRQ bitfields structure. So, during the initialization the user
+ * has to fill the @ref SpiritIrqs structure setting to one the single field related to the IRQ he
+ * wants to enable, and to zero the single field related to all the IRQs he wants to disable.
+ *
+ * <b>Example:</b>
+ * @code
+ *
+ *  SpiritIrqs irqMask;
+ *
+ *  ...
+ *
+ *  SpiritIrqDeInit(&irqMask);                // this call is used to reset the IRQ mask registers
+ *                                            // and to set to 0x00000000 the irq mask in order to disable
+ *                                            // all IRQs (disabled by default on startup)
+ *  irqMask.IRQ_RX_DATA_READY = 1;
+ *  irqMask.IRQ_VALID_SYNC = 1;
+ *  irqMask.IRQ_RX_TIMEOUT = 1;
+ *
+ *  ...
+ * @endcode
+ * </li>
+ * </ul>
+ *
+ * The most applications will require a Spirit IRQ notification on an microcontroller EXTI line.
+ * Then, the user can check which IRQ has been raised using two different ways.
+ *
+ * On the ISR of the EXTI line phisically linked to the Spirit pin configured for IRQ:
+ *
+ * <ul>
+ * <li> Check <b>only one</b> Spirit IRQ (because the Spirit IRQ status register automatically blanks itself
+ * after an SPI reading) into the ISR.
+ *
+ * <b>Example:</b>
+ * @code
+ *
+ *  if(SpiritIrqCheckFlag(RX_DATA_READY))
+ *  {
+ *          // do something...
+ *  }
+ *
+ * @endcode
+ * </li>
+ *
+ * <li> Check more than one Spirit IRQ status by storing the entire IRQ status registers into a bitfields <i>@ref SpiritIrqs</i> structure
+ * and then check the interested bits.
+ *
+ * <b>Example:</b>
+ * @code
+ *
+ *  SpiritIrqGetStatus(&irqStatus);
+ *
+ *  if(irqStatus.IRQ_RX_DATA_READY)
+ *  {
+ *          // do something...
+ *  }
+ *  if(irqStatus.IRQ_VALID_SYNC)
+ *  {
+ *         // do something...
+ *  }
+ *  if(irqStatus.RX_TIMEOUT)
+ *  {
+ *         // do something...
+ *  }
+ *
+ * @endcode
+ * </li>
+ * </ul>
+ *
+
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __SPIRIT1_IRQ_H
+#define __SPIRIT1_IRQ_H
+
+
+/* Includes ------------------------------------------------------------------*/
+
+#include "SPIRIT_Regs.h"
+#include "SPIRIT_Types.h"
+
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+
+/**
+ * @addtogroup SPIRIT_Libraries
+ * @{
+ */
+
+
+/**
+ * @defgroup SPIRIT_Irq IRQ
+ * @brief Configuration and management of SPIRIT IRQs.
+ * @details See the file <i>@ref SPIRIT_Irq.h</i> for more details.
+ * @{
+ */
+
+/**
+ * @defgroup Irq_Exported_Types IRQ Exported Types
+ * @{
+ */
+
+
+/**
+ * @brief IRQ bitfield structure for SPIRIT. This structure is used to read or write the single IRQ bit.
+ *        During the initialization the user has to fill this structure setting to one the single field related
+ *        to the IRQ he wants to enable, and to zero the single field related to all the IRQs he wants to disable.
+ *        The same structure can be used to retrieve all the IRQ events from the IRQ registers IRQ_STATUS[3:0],
+ *        and read if one or more specific IRQ raised.
+ * @note  The fields order in the structure depends on used endianness (little or big
+ *        endian). The actual definition is valid ONLY for LITTLE ENDIAN mode. Be sure to
+ *        change opportunely the fields order when use a different endianness.
+ */
+typedef struct
+{
+	  SpiritFlagStatus  IRQ_SYNTH_LOCK_TIMEOUT:1;       /*!< IRQ: only for debug; LOCK state timeout */
+	  SpiritFlagStatus  IRQ_SYNTH_LOCK_STARTUP:1;       /*!< IRQ: only for debug; see CALIBR_START_COUNTER */
+	  SpiritFlagStatus  IRQ_SYNTH_CAL_TIMEOUT:1;        /*!< IRQ: only for debug; SYNTH calibration timeout */
+	  SpiritFlagStatus  IRQ_TX_START_TIME:1;            /*!< IRQ: only for debug; TX circuitry startup time; see TX_START_COUNTER */
+	  SpiritFlagStatus  IRQ_RX_START_TIME:1;            /*!< IRQ: only for debug; RX circuitry startup time; see TX_START_COUNTER */
+	  SpiritFlagStatus  IRQ_RX_TIMEOUT:1;               /*!< IRQ: RX operation timeout */
+	  SpiritFlagStatus  IRQ_AES_END:1;                  /*!< IRQ: AES End of operation */
+	  SpiritFlagStatus  reserved:1;                     /*!< Reserved bit */
+
+	  SpiritFlagStatus  IRQ_READY:1;                    /*!< IRQ: READY state */
+	  SpiritFlagStatus  IRQ_STANDBY_DELAYED:1;          /*!< IRQ: STANDBY state after MCU_CK_CONF_CLOCK_TAIL_X clock cycles */
+	  SpiritFlagStatus  IRQ_LOW_BATT_LVL:1;             /*!< IRQ: Battery level below threshold*/
+	  SpiritFlagStatus  IRQ_POR:1;                      /*!< IRQ: Power On Reset */
+	  SpiritFlagStatus  IRQ_BOR:1;                      /*!< IRQ: Brown out event (both accurate and inaccurate)*/
+	  SpiritFlagStatus  IRQ_LOCK:1;                     /*!< IRQ: LOCK state */
+	  SpiritFlagStatus  IRQ_PM_COUNT_EXPIRED:1;         /*!< IRQ: only for debug; Power Management startup timer expiration (see reg PM_START_COUNTER, 0xB5) */
+	  SpiritFlagStatus  IRQ_XO_COUNT_EXPIRED:1;         /*!< IRQ: only for debug; Crystal oscillator settling time counter expired */
+
+	  SpiritFlagStatus  IRQ_TX_FIFO_ALMOST_EMPTY:1;     /*!< IRQ: TX FIFO almost empty */
+	  SpiritFlagStatus  IRQ_RX_FIFO_ALMOST_FULL:1;      /*!< IRQ: RX FIFO almost full */
+	  SpiritFlagStatus  IRQ_RX_FIFO_ALMOST_EMPTY:1;     /*!< IRQ: RX FIFO almost empty  */
+	  SpiritFlagStatus  IRQ_MAX_BO_CCA_REACH:1;         /*!< IRQ: Max number of back-off during CCA */
+	  SpiritFlagStatus  IRQ_VALID_PREAMBLE:1;           /*!< IRQ: Valid preamble detected */
+	  SpiritFlagStatus  IRQ_VALID_SYNC:1;               /*!< IRQ: Sync word detected */
+	  SpiritFlagStatus  IRQ_RSSI_ABOVE_TH:1;            /*!< IRQ: RSSI above threshold */
+	  SpiritFlagStatus  IRQ_WKUP_TOUT_LDC:1;            /*!< IRQ: Wake-up timeout in LDC mode */
+
+	  SpiritFlagStatus  IRQ_RX_DATA_READY:1;            /*!< IRQ: RX data ready */
+	  SpiritFlagStatus  IRQ_RX_DATA_DISC:1;             /*!< IRQ: RX data discarded (upon filtering) */
+	  SpiritFlagStatus  IRQ_TX_DATA_SENT:1;             /*!< IRQ: TX data sent */
+	  SpiritFlagStatus  IRQ_MAX_RE_TX_REACH:1;          /*!< IRQ: Max re-TX reached */
+	  SpiritFlagStatus  IRQ_CRC_ERROR:1;                /*!< IRQ: CRC error */
+	  SpiritFlagStatus  IRQ_TX_FIFO_ERROR:1;            /*!< IRQ: TX FIFO underflow/overflow error */
+	  SpiritFlagStatus  IRQ_RX_FIFO_ERROR:1;            /*!< IRQ: RX FIFO underflow/overflow error */
+	  SpiritFlagStatus  IRQ_TX_FIFO_ALMOST_FULL:1;      /*!< IRQ: TX FIFO almost full */
+} SpiritIrqs;
+
+// betzw: uint32_t masks
+#define IRQ_TX_FIFO_ALMOST_EMPTY_MASK	(0x00010000) /* (1<<16) */
+#define IRQ_RX_FIFO_ALMOST_FULL_MASK	(0x00020000) /* (1<<17) */
+#define IRQ_VALID_SYNC_MASK				(0x00200000) /* (1<<21) */
+#define IRQ_RX_DATA_READY_MASK			(0x01000000) /* (1<<24) */
+#define IRQ_RX_DATA_DISC_MASK			(0x02000000) /* (1<<25) */
+#define IRQ_TX_DATA_SENT_MASK			(0x04000000) /* (1<<26) */
+#define IRQ_TX_FIFO_ERROR_MASK			(0x20000000) /* (1<<29) */
+#define IRQ_RX_FIFO_ERROR_MASK			(0x40000000) /* (1<<30) */
+
+/**
+ * @brief  IRQ list enumeration for SPIRIT. This enumeration type can be used to address a
+ *         specific IRQ.
+ */
+typedef enum
+{
+  RX_DATA_READY = 0x00000001,           /*!< IRQ: RX data ready */
+  RX_DATA_DISC = 0x00000002,            /*!< IRQ: RX data discarded (upon filtering) */
+  TX_DATA_SENT = 0x00000004,            /*!< IRQ: TX data sent */
+  MAX_RE_TX_REACH = 0x00000008,         /*!< IRQ: Max re-TX reached */
+  CRC_ERROR = 0x00000010,               /*!< IRQ: CRC error */
+  TX_FIFO_ERROR = 0x00000020,           /*!< IRQ: TX FIFO underflow/overflow error */
+  RX_FIFO_ERROR = 0x00000040,           /*!< IRQ: RX FIFO underflow/overflow error */
+  TX_FIFO_ALMOST_FULL = 0x00000080,     /*!< IRQ: TX FIFO almost full */
+  TX_FIFO_ALMOST_EMPTY = 0x00000100,    /*!< IRQ: TX FIFO almost empty */
+  RX_FIFO_ALMOST_FULL = 0x00000200,     /*!< IRQ: RX FIFO almost full */
+  RX_FIFO_ALMOST_EMPTY = 0x00000400,    /*!< IRQ: RX FIFO almost empty  */
+  MAX_BO_CCA_REACH = 0x00000800,        /*!< IRQ: Max number of back-off during CCA */
+  VALID_PREAMBLE = 0x00001000,          /*!< IRQ: Valid preamble detected */
+  VALID_SYNC = 0x00002000,              /*!< IRQ: Sync word detected */
+  RSSI_ABOVE_TH = 0x00004000,           /*!< IRQ: RSSI above threshold */
+  WKUP_TOUT_LDC = 0x00008000,           /*!< IRQ: Wake-up timeout in LDC mode */
+  READY = 0x00010000,                   /*!< IRQ: READY state */
+  STANDBY_DELAYED = 0x00020000,         /*!< IRQ: STANDBY state after MCU_CK_CONF_CLOCK_TAIL_X clock cycles */
+  LOW_BATT_LVL = 0x00040000,            /*!< IRQ: Battery level below threshold*/
+  POR = 0x00080000,                     /*!< IRQ: Power On Reset */
+  BOR = 0x00100000,                     /*!< IRQ: Brown out event (both accurate and inaccurate)*/
+  LOCK = 0x00200000,                    /*!< IRQ: LOCK state */
+  PM_COUNT_EXPIRED = 0x00400000,        /*!< IRQ: only for debug; Power Management startup timer expiration (see reg PM_START_COUNTER, 0xB5) */
+  XO_COUNT_EXPIRED = 0x00800000,        /*!< IRQ: only for debug; Crystal oscillator settling time counter expired */
+  SYNTH_LOCK_TIMEOUT = 0x01000000,      /*!< IRQ: only for debug; LOCK state timeout */
+  SYNTH_LOCK_STARTUP = 0x02000000,      /*!< IRQ: only for debug; see CALIBR_START_COUNTER */
+  SYNTH_CAL_TIMEOUT = 0x04000000,       /*!< IRQ: only for debug; SYNTH calibration timeout */
+  TX_START_TIME = 0x08000000,	        /*!< IRQ: only for debug; TX circuitry startup time; see TX_START_COUNTER */
+  RX_START_TIME = 0x10000000,	        /*!< IRQ: only for debug; RX circuitry startup time; see TX_START_COUNTER */
+  RX_TIMEOUT = 0x20000000,	        /*!< IRQ: RX operation timeout */
+  AES_END = 0x40000000,                 /*!< IRQ: AES End of operation */
+  ALL_IRQ = 0x7FFFFFFF			/*!< All the above mentioned IRQs */
+
+} IrqList;
+
+#define IS_SPIRIT_IRQ_LIST(VALUE)   ((VALUE == RX_DATA_READY) || \
+                                     (VALUE == RX_DATA_DISC)  || \
+                                     (VALUE == TX_DATA_SENT)  || \
+                                     (VALUE == MAX_RE_TX_REACH)  || \
+                                     (VALUE == CRC_ERROR)  || \
+                                     (VALUE == TX_FIFO_ERROR)  || \
+                                     (VALUE == RX_FIFO_ERROR)  || \
+                                     (VALUE == TX_FIFO_ALMOST_FULL)  || \
+                                     (VALUE == TX_FIFO_ALMOST_EMPTY)  || \
+                                     (VALUE == RX_FIFO_ALMOST_FULL)  || \
+                                     (VALUE == RX_FIFO_ALMOST_EMPTY)  || \
+                                     (VALUE == MAX_BO_CCA_REACH)  || \
+                                     (VALUE == VALID_PREAMBLE)  || \
+                                     (VALUE == VALID_SYNC)  || \
+                                     (VALUE == RSSI_ABOVE_TH)  || \
+                                     (VALUE == WKUP_TOUT_LDC)  || \
+                                     (VALUE == READY)  || \
+                                     (VALUE == STANDBY_DELAYED)  || \
+                                     (VALUE == LOW_BATT_LVL)  || \
+                                     (VALUE == POR)  || \
+                                     (VALUE == BOR)  || \
+                                     (VALUE == LOCK)  || \
+                                     (VALUE == PM_COUNT_EXPIRED)  || \
+                                     (VALUE == XO_COUNT_EXPIRED)  || \
+                                     (VALUE == SYNTH_LOCK_TIMEOUT)  || \
+                                     (VALUE == SYNTH_LOCK_STARTUP)  || \
+                                     (VALUE == SYNTH_CAL_TIMEOUT)  || \
+                                     (VALUE == TX_START_TIME)  || \
+                                     (VALUE == RX_START_TIME)  || \
+                                     (VALUE == RX_TIMEOUT)  || \
+                                     (VALUE == AES_END)   || \
+				     (VALUE == ALL_IRQ ))
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @defgroup Irq_Exported_Constants     IRQ Exported Constants
+ * @{
+ */
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @defgroup Irq_Exported_Macros        IRQ Exported Macros
+ * @{
+ */
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @defgroup Irq_Exported_Functions     IRQ Exported Functions
+ * @{
+ */
+
+void SpiritIrqDeInit(SpiritIrqs* pxIrqInit);
+void SpiritIrqInit(SpiritIrqs* pxIrqInit);
+void SpiritIrq(IrqList xIrq, SpiritFunctionalState xNewState);
+void SpiritIrqGetMask(SpiritIrqs* pxIrqMask);
+void SpiritIrqGetStatus(SpiritIrqs* pxIrqStatus);
+void SpiritIrqClearStatus(void);
+SpiritBool SpiritIrqCheckFlag(IrqList xFlag);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+/******************* (C) COPYRIGHT 2015 STMicroelectronics *****END OF FILE****/