ST
Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.
Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo
Currently supported boards:
Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:
- Unmount resistor
R4 - Mount resistor
R7
Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!
This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).
Diff: source/libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_Gpio.h
- Revision:
- 67:93bec0baf1de
- Parent:
- 34:edda6a7238ec
--- a/source/libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_Gpio.h Wed Jul 05 14:02:16 2017 +0200
+++ b/source/libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_Gpio.h Thu Jul 06 11:13:31 2017 +0200
@@ -1,405 +1,405 @@
-/**
- ******************************************************************************
- * @file SPIRIT_Gpio.h
- * @author VMA division - AMS
- * @version 3.2.2
- * @date 08-July-2015
- * @brief This file provides all the low level API to manage SPIRIT GPIO.
- *
- * @details
- *
- * This module can be used to configure the Spirit GPIO pins to perform
- * specific functions.
- * The structure <i>@ref gpioIRQ</i> can be used to specify these features for
- * one of the four Spirit Gpio pin.
- * The following example shows how to configure a pin (GPIO 3) to be used as an IRQ source
- * for a microcontroller using the <i>@ref SpiritGpioInit()</i> function.
- *
- * <b>Example:</b>
- * @code
- *
- * SGpioInit gpioIRQ={
- * SPIRIT_GPIO_3,
- * SPIRIT_GPIO_MODE_DIGITAL_OUTPUT_LP,
- * SPIRIT_GPIO_DIG_OUT_IRQ
- * };
- *
- * ...
- *
- * SpiritGpioInit(&gpioIRQ);
- *
- * @endcode
- *
- * @note Please read the functions documentation for the other GPIO features.
- *
- *
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __SPIRIT_GPIO_H
-#define __SPIRIT_GPIO_H
-
-
-/* Includes ------------------------------------------------------------------*/
-
-#include "SPIRIT_Regs.h"
-#include "SPIRIT_Types.h"
-
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-/** @addtogroup SPIRIT_Libraries
- * @{
- */
-
-
-/** @defgroup SPIRIT_Gpio GPIO
- * @brief Configuration and management of SPIRIT GPIO.
- * @details See the file <i>@ref SPIRIT_Gpio.h</i> for more details.
- * @{
- */
-
-
-
-/** @defgroup Gpio_Exported_Types GPIO Exported Types
- * @{
- */
-
-/**
- * @brief SPIRIT GPIO pin enumeration.
- */
-typedef enum
-{
- SPIRIT_GPIO_0 = GPIO0_CONF_BASE, /*!< GPIO_0 selected */
- SPIRIT_GPIO_1 = GPIO1_CONF_BASE, /*!< GPIO_1 selected */
- SPIRIT_GPIO_2 = GPIO2_CONF_BASE, /*!< GPIO_2 selected */
- SPIRIT_GPIO_3 = GPIO3_CONF_BASE /*!< GPIO_3 selected */
-}SpiritGpioPin;
-
-
-#define IS_SPIRIT_GPIO(PIN) ((PIN == SPIRIT_GPIO_0) || \
- (PIN == SPIRIT_GPIO_1) || \
- (PIN == SPIRIT_GPIO_2) || \
- (PIN == SPIRIT_GPIO_3))
-
-
-/**
- * @brief SPIRIT GPIO mode enumeration.
- */
-typedef enum
-{
- SPIRIT_GPIO_MODE_DIGITAL_INPUT = 0x01, /*!< Digital Input on GPIO */
- SPIRIT_GPIO_MODE_DIGITAL_OUTPUT_LP = 0x02, /*!< Digital Output on GPIO (low current) */
- SPIRIT_GPIO_MODE_DIGITAL_OUTPUT_HP = 0x03 /*!< Digital Output on GPIO (high current) */
-}SpiritGpioMode;
-
-#define IS_SPIRIT_GPIO_MODE(MODE) ((MODE == SPIRIT_GPIO_MODE_DIGITAL_INPUT) || \
- (MODE == SPIRIT_GPIO_MODE_DIGITAL_OUTPUT_LP) || \
- (MODE == SPIRIT_GPIO_MODE_DIGITAL_OUTPUT_HP))
-
-
-
-/**
- * @brief SPIRIT I/O selection enumeration.
- */
-typedef enum
-{
- SPIRIT_GPIO_DIG_OUT_IRQ = 0x00, /*!< nIRQ (Interrupt Request, active low) , default configuration after POR */
- SPIRIT_GPIO_DIG_OUT_POR_INV = 0x08, /*!< POR inverted (active low) */
- SPIRIT_GPIO_DIG_OUT_WUT_EXP = 0x10, /*!< Wake-Up Timer expiration: "1" when WUT has expired */
- SPIRIT_GPIO_DIG_OUT_LBD = 0x18, /*!< Low battery detection: "1" when battery is below threshold setting */
- SPIRIT_GPIO_DIG_OUT_TX_DATA = 0x20, /*!< TX data internal clock output (TX data are sampled on the rising edge of it) */
- SPIRIT_GPIO_DIG_OUT_TX_STATE = 0x28, /*!< TX state indication: "1" when Spirit1 is passing in the TX state */
- SPIRIT_GPIO_DIG_OUT_TX_FIFO_ALMOST_EMPTY = 0x30, /*!< TX FIFO Almost Empty Flag */
- SPIRIT_GPIO_DIG_OUT_TX_FIFO_ALMOST_FULL = 0x38, /*!< TX FIFO Almost Full Flag */
- SPIRIT_GPIO_DIG_OUT_RX_DATA = 0x40, /*!< RX data output */
- SPIRIT_GPIO_DIG_OUT_RX_CLOCK = 0x48, /*!< RX clock output (recovered from received data) */
- SPIRIT_GPIO_DIG_OUT_RX_STATE = 0x50, /*!< RX state indication: "1" when Spirit1 is passing in the RX state */
- SPIRIT_GPIO_DIG_OUT_RX_FIFO_ALMOST_FULL = 0x58, /*!< RX FIFO Almost Full Flag */
- SPIRIT_GPIO_DIG_OUT_RX_FIFO_ALMOST_EMPTY = 0x60, /*!< RX FIFO Almost Empty Flag */
- SPIRIT_GPIO_DIG_OUT_ANTENNA_SWITCH = 0x68, /*!< Antenna switch used for antenna diversity */
- SPIRIT_GPIO_DIG_OUT_VALID_PREAMBLE = 0x70, /*!< Valid Preamble Detected Flag */
- SPIRIT_GPIO_DIG_OUT_SYNC_DETECTED = 0x78, /*!< Sync WordSync Word Detected Flag */
- SPIRIT_GPIO_DIG_OUT_RSSI_THRESHOLD = 0x80, /*!< RSSI above threshold */
- SPIRIT_GPIO_DIG_OUT_MCU_CLOCK = 0x88, /*!< MCU Clock */
- SPIRIT_GPIO_DIG_OUT_TX_RX_MODE = 0x90, /*!< TX or RX mode indicator (to enable an external range extender) */
- SPIRIT_GPIO_DIG_OUT_VDD = 0x98, /*!< VDD (to emulate an additional GPIO of the MCU, programmable by SPI) */
- SPIRIT_GPIO_DIG_OUT_GND = 0xA0, /*!< GND (to emulate an additional GPIO of the MCU, programmable by SPI) */
- SPIRIT_GPIO_DIG_OUT_SMPS_EXT = 0xA8, /*!< External SMPS enable signal (active high) */
- SPIRIT_GPIO_DIG_OUT_SLEEP_OR_STANDBY = 0xB0,
- SPIRIT_GPIO_DIG_OUT_READY = 0xB8,
- SPIRIT_GPIO_DIG_OUT_LOCK = 0xC0,
- SPIRIT_GPIO_DIG_OUT_WAIT_FOR_LOCK_SIG = 0xC8,
- SPIRIT_GPIO_DIG_OUT_WAIT_FOR_TIMER_FOR_LOCK = 0xD0,
- SPIRIT_GPIO_DIG_OUT_WAIT_FOR_READY2_SIG = 0xD8,
- SPIRIT_GPIO_DIG_OUT_WAIT_FOR_TIMER_FOR_PM_SET = 0xE0,
- SPIRIT_GPIO_DIG_OUT_WAIT_VCO_CALIBRATION = 0xE8,
- SPIRIT_GPIO_DIG_OUT_ENABLE_SYNTH_FULL_CIRCUIT = 0xF0,
- SPIRIT_GPIO_DIG_OUT_WAIT_FOR_RCCAL_OK_SIG = 0xFF,
-
- SPIRIT_GPIO_DIG_IN_TX_COMMAND = 0x00,
- SPIRIT_GPIO_DIG_IN_RX_COMMAND = 0x08,
- SPIRIT_GPIO_DIG_IN_TX_DATA_INPUT_FOR_DIRECTRF = 0x10,
- SPIRIT_GPIO_DIG_IN_DATA_WAKEUP = 0x18,
- SPIRIT_GPIO_DIG_IN_EXT_CLOCK_AT_34_7KHZ = 0x20
-
-}SpiritGpioIO;
-
-#define IS_SPIRIT_GPIO_IO(IO_SEL) ((IO_SEL == SPIRIT_GPIO_DIG_OUT_IRQ) || \
- (IO_SEL == SPIRIT_GPIO_DIG_OUT_POR_INV) || \
- (IO_SEL == SPIRIT_GPIO_DIG_OUT_WUT_EXP) || \
- (IO_SEL == SPIRIT_GPIO_DIG_OUT_LBD) || \
- (IO_SEL == SPIRIT_GPIO_DIG_OUT_TX_DATA) || \
- (IO_SEL == SPIRIT_GPIO_DIG_OUT_TX_STATE) || \
- (IO_SEL == SPIRIT_GPIO_DIG_OUT_TX_FIFO_ALMOST_EMPTY) || \
- (IO_SEL == SPIRIT_GPIO_DIG_OUT_TX_FIFO_ALMOST_FULL) || \
- (IO_SEL == SPIRIT_GPIO_DIG_OUT_RX_DATA) || \
- (IO_SEL == SPIRIT_GPIO_DIG_OUT_RX_CLOCK) || \
- (IO_SEL == SPIRIT_GPIO_DIG_OUT_RX_STATE) || \
- (IO_SEL == SPIRIT_GPIO_DIG_OUT_RX_FIFO_ALMOST_FULL) || \
- (IO_SEL == SPIRIT_GPIO_DIG_OUT_RX_FIFO_ALMOST_EMPTY) || \
- (IO_SEL == SPIRIT_GPIO_DIG_OUT_ANTENNA_SWITCH) || \
- (IO_SEL == SPIRIT_GPIO_DIG_OUT_VALID_PREAMBLE) || \
- (IO_SEL == SPIRIT_GPIO_DIG_OUT_SYNC_DETECTED) || \
- (IO_SEL == SPIRIT_GPIO_DIG_OUT_RSSI_THRESHOLD) || \
- (IO_SEL == SPIRIT_GPIO_DIG_OUT_MCU_CLOCK) || \
- (IO_SEL == SPIRIT_GPIO_DIG_OUT_TX_RX_MODE) || \
- (IO_SEL == SPIRIT_GPIO_DIG_OUT_VDD) || \
- (IO_SEL == SPIRIT_GPIO_DIG_OUT_GND) || \
- (IO_SEL == SPIRIT_GPIO_DIG_OUT_SMPS_EXT) ||\
- (IO_SEL == SPIRIT_GPIO_DIG_OUT_SLEEP_OR_STANDBY) ||\
- (IO_SEL == SPIRIT_GPIO_DIG_OUT_READY) ||\
- (IO_SEL == SPIRIT_GPIO_DIG_OUT_LOCK) ||\
- (IO_SEL == SPIRIT_GPIO_DIG_OUT_WAIT_FOR_LOCK_SIG) ||\
- (IO_SEL == SPIRIT_GPIO_DIG_OUT_WAIT_FOR_TIMER_FOR_LOCK) ||\
- (IO_SEL == SPIRIT_GPIO_DIG_OUT_WAIT_FOR_READY2_SIG) ||\
- (IO_SEL == SPIRIT_GPIO_DIG_OUT_WAIT_FOR_TIMER_FOR_PM_SET) ||\
- (IO_SEL == SPIRIT_GPIO_DIG_OUT_WAIT_VCO_CALIBRATION) ||\
- (IO_SEL == SPIRIT_GPIO_DIG_OUT_ENABLE_SYNTH_FULL_CIRCUIT) ||\
- (IO_SEL == SPIRIT_GPIO_DIG_OUT_WAIT_FOR_RCCAL_OK_SIG) ||\
- (IO_SEL == SPIRIT_GPIO_DIG_IN_TX_COMMAND) ||\
- (IO_SEL == SPIRIT_GPIO_DIG_IN_RX_COMMAND) ||\
- (IO_SEL == SPIRIT_GPIO_DIG_IN_TX_DATA_INPUT_FOR_DIRECTRF) ||\
- (IO_SEL == SPIRIT_GPIO_DIG_IN_DATA_WAKEUP) ||\
- (IO_SEL == SPIRIT_GPIO_DIG_IN_EXT_CLOCK_AT_34_7KHZ))
-
-/**
- * @brief SPIRIT OutputLevel enumeration.
- */
-
-typedef enum
-{
- LOW = 0,
- HIGH = !LOW
-}OutputLevel;
-
-#define IS_SPIRIT_GPIO_LEVEL(LEVEL) ((LEVEL == LOW) || \
- (LEVEL == HIGH))
-
-
-/**
- * @brief SPIRIT GPIO Init structure definition.
- */
-typedef struct
-{
- SpiritGpioPin xSpiritGpioPin; /*!< Specifies the GPIO pins to be configured.
- This parameter can be any value of @ref SpiritGpioPin */
-
- SpiritGpioMode xSpiritGpioMode; /*!< Specifies the operating mode for the selected pins.
- This parameter can be a value of @ref SpiritGpioMode */
-
- SpiritGpioIO xSpiritGpioIO; /*!< Specifies the I/O selection for the selected pins.
- This parameter can be a value of @ref SpiritGpioIO */
-
-}SGpioInit;
-
-
-
-/**
- * @brief SPIRIT clock output XO prescaler enumeration.
- */
-
-typedef enum
-{
- XO_RATIO_1 = 0x00, /*!< XO Clock signal available on the GPIO divided by 1 */
- XO_RATIO_2_3 = 0x02, /*!< XO Clock signal available on the GPIO divided by 2/3 */
- XO_RATIO_1_2 = 0x04, /*!< XO Clock signal available on the GPIO divided by 1/2 */
- XO_RATIO_1_3 = 0x06, /*!< XO Clock signal available on the GPIO divided by 1/3 */
- XO_RATIO_1_4 = 0x08, /*!< XO Clock signal available on the GPIO divided by 1/4 */
- XO_RATIO_1_6 = 0x0A, /*!< XO Clock signal available on the GPIO divided by 1/6 */
- XO_RATIO_1_8 = 0x0C, /*!< XO Clock signal available on the GPIO divided by 1/8 */
- XO_RATIO_1_12 = 0x0E, /*!< XO Clock signal available on the GPIO divided by 1/12 */
- XO_RATIO_1_16 = 0x10, /*!< XO Clock signal available on the GPIO divided by 1/16 */
- XO_RATIO_1_24 = 0x12, /*!< XO Clock signal available on the GPIO divided by 1/24 */
- XO_RATIO_1_36 = 0x14, /*!< XO Clock signal available on the GPIO divided by 1/36 */
- XO_RATIO_1_48 = 0x16, /*!< XO Clock signal available on the GPIO divided by 1/48 */
- XO_RATIO_1_64 = 0x18, /*!< XO Clock signal available on the GPIO divided by 1/64 */
- XO_RATIO_1_96 = 0x1A, /*!< XO Clock signal available on the GPIO divided by 1/96 */
- XO_RATIO_1_128 = 0x1C, /*!< XO Clock signal available on the GPIO divided by 1/128 */
- XO_RATIO_1_192 = 0x1E /*!< XO Clock signal available on the GPIO divided by 1/196 */
-}ClockOutputXOPrescaler;
-
-#define IS_SPIRIT_CLOCK_OUTPUT_XO(RATIO) ((RATIO == XO_RATIO_1) || \
- (RATIO == XO_RATIO_2_3) || \
- (RATIO == XO_RATIO_1_2) || \
- (RATIO == XO_RATIO_1_3) || \
- (RATIO == XO_RATIO_1_4) || \
- (RATIO == XO_RATIO_1_6) || \
- (RATIO == XO_RATIO_1_8) || \
- (RATIO == XO_RATIO_1_12) || \
- (RATIO == XO_RATIO_1_16) || \
- (RATIO == XO_RATIO_1_24) || \
- (RATIO == XO_RATIO_1_36) || \
- (RATIO == XO_RATIO_1_48) || \
- (RATIO == XO_RATIO_1_64) || \
- (RATIO == XO_RATIO_1_96) || \
- (RATIO == XO_RATIO_1_128) || \
- (RATIO == XO_RATIO_1_192))
-
-/**
- * @brief SPIRIT Clock Output RCO prescaler enumeration.
- */
-
-typedef enum
-{
- RCO_RATIO_1 = 0x00, /*!< RCO Clock signal available on the GPIO divided by 1 */
- RCO_RATIO_1_128 = 0x01 /*!< RCO Clock signal available on the GPIO divided by 1/128 */
-}ClockOutputRCOPrescaler;
-
-#define IS_SPIRIT_CLOCK_OUTPUT_RCO(RATIO) ((RATIO == RCO_RATIO_1) || \
- (RATIO == RCO_RATIO_1_128))
-
-/**
- * @brief SPIRIT ExtraClockCycles enumeration.
- */
-
-typedef enum
-{
-EXTRA_CLOCK_CYCLES_0 = 0x00, /*!< 0 extra clock cycles provided to the MCU before switching to STANDBY state */
-EXTRA_CLOCK_CYCLES_64 = 0x20, /*!< 64 extra clock cycles provided to the MCU before switching to STANDBY state */
-EXTRA_CLOCK_CYCLES_256 = 0x40, /*!< 256 extra clock cycles provided to the MCU before switching to STANDBY state */
-EXTRA_CLOCK_CYCLES_512 = 0x60 /*!< 512 extra clock cycles provided to the MCU before switching to STANDBY state */
-}ExtraClockCycles;
-
-#define IS_SPIRIT_CLOCK_OUTPUT_EXTRA_CYCLES(CYCLES) ((CYCLES == EXTRA_CLOCK_CYCLES_0) || \
- (CYCLES == EXTRA_CLOCK_CYCLES_64) || \
- (CYCLES == EXTRA_CLOCK_CYCLES_256) || \
- (CYCLES == EXTRA_CLOCK_CYCLES_512))
-
-
-/**
- * @brief SPIRIT Clock Output initialization structure definition.
- */
-typedef struct
-{
- ClockOutputXOPrescaler xClockOutputXOPrescaler; /*!< Specifies the XO Ratio as clock output.
- This parameter can be any value of @ref ClockOutputXOPrescaler */
-
- ClockOutputRCOPrescaler xClockOutputRCOPrescaler; /*!< Specifies the RCO Ratio as clock output.
- This parameter can be a value of @ref ClockOutputRCOPrescaler */
-
- ExtraClockCycles xExtraClockCycles; /*!< Specifies the Extra Clock Cycles provided before entering in Standby State.
- This parameter can be a value of @ref ExtraClockCycles */
-
-}ClockOutputInit;
-
-
-
-/**
- * @}
- */
-
-
-
-/** @defgroup Gpio_Exported_Constants GPIO Exported Constants
- * @{
- */
-
-
-/**
- * @}
- */
-
-
-
-/** @defgroup Gpio_Exported_Macros GPIO Exported Macros
- * @{
- */
-
-
-/**
- * @}
- */
-
-
-
-/** @defgroup Gpio_Exported_Functions GPIO Exported Functions
- * @{
- */
-
-void SpiritGpioInit(SGpioInit* pxGpioInitStruct);
-void SpiritGpioTemperatureSensor(SpiritFunctionalState xNewState);
-void SpiritGpioSetLevel(SpiritGpioPin xGpioX, OutputLevel xLevel);
-OutputLevel SpiritGpioGetLevel(SpiritGpioPin xGpioX);
-void SpiritGpioClockOutput(SpiritFunctionalState xNewState);
-void SpiritGpioClockOutputInit(ClockOutputInit* pxClockOutputInitStruct);
-void SpiritGpioSetXOPrescaler(ClockOutputXOPrescaler xXOPrescaler);
-ClockOutputXOPrescaler SpiritGpioGetXOPrescaler(void);
-void SpiritGpioSetRCOPrescaler(ClockOutputRCOPrescaler xRCOPrescaler);
-ClockOutputRCOPrescaler SpiritGpioGetRCOPrescaler(void);
-void SpiritGpioSetExtraClockCycles(ExtraClockCycles xExtraCycles);
-ExtraClockCycles SpiritGpioGetExtraClockCycles(void);
-
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-
-/**
- * @}
- */
-
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
-
-/******************* (C) COPYRIGHT 2015 STMicroelectronics *****END OF FILE****/
+/**
+ ******************************************************************************
+ * @file SPIRIT_Gpio.h
+ * @author VMA division - AMS
+ * @version 3.2.2
+ * @date 08-July-2015
+ * @brief This file provides all the low level API to manage SPIRIT GPIO.
+ *
+ * @details
+ *
+ * This module can be used to configure the Spirit GPIO pins to perform
+ * specific functions.
+ * The structure <i>@ref gpioIRQ</i> can be used to specify these features for
+ * one of the four Spirit Gpio pin.
+ * The following example shows how to configure a pin (GPIO 3) to be used as an IRQ source
+ * for a microcontroller using the <i>@ref SpiritGpioInit()</i> function.
+ *
+ * <b>Example:</b>
+ * @code
+ *
+ * SGpioInit gpioIRQ={
+ * SPIRIT_GPIO_3,
+ * SPIRIT_GPIO_MODE_DIGITAL_OUTPUT_LP,
+ * SPIRIT_GPIO_DIG_OUT_IRQ
+ * };
+ *
+ * ...
+ *
+ * SpiritGpioInit(&gpioIRQ);
+ *
+ * @endcode
+ *
+ * @note Please read the functions documentation for the other GPIO features.
+ *
+ *
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __SPIRIT_GPIO_H
+#define __SPIRIT_GPIO_H
+
+
+/* Includes ------------------------------------------------------------------*/
+
+#include "SPIRIT_Regs.h"
+#include "SPIRIT_Types.h"
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/** @addtogroup SPIRIT_Libraries
+ * @{
+ */
+
+
+/** @defgroup SPIRIT_Gpio GPIO
+ * @brief Configuration and management of SPIRIT GPIO.
+ * @details See the file <i>@ref SPIRIT_Gpio.h</i> for more details.
+ * @{
+ */
+
+
+
+/** @defgroup Gpio_Exported_Types GPIO Exported Types
+ * @{
+ */
+
+/**
+ * @brief SPIRIT GPIO pin enumeration.
+ */
+typedef enum
+{
+ SPIRIT_GPIO_0 = GPIO0_CONF_BASE, /*!< GPIO_0 selected */
+ SPIRIT_GPIO_1 = GPIO1_CONF_BASE, /*!< GPIO_1 selected */
+ SPIRIT_GPIO_2 = GPIO2_CONF_BASE, /*!< GPIO_2 selected */
+ SPIRIT_GPIO_3 = GPIO3_CONF_BASE /*!< GPIO_3 selected */
+}SpiritGpioPin;
+
+
+#define IS_SPIRIT_GPIO(PIN) ((PIN == SPIRIT_GPIO_0) || \
+ (PIN == SPIRIT_GPIO_1) || \
+ (PIN == SPIRIT_GPIO_2) || \
+ (PIN == SPIRIT_GPIO_3))
+
+
+/**
+ * @brief SPIRIT GPIO mode enumeration.
+ */
+typedef enum
+{
+ SPIRIT_GPIO_MODE_DIGITAL_INPUT = 0x01, /*!< Digital Input on GPIO */
+ SPIRIT_GPIO_MODE_DIGITAL_OUTPUT_LP = 0x02, /*!< Digital Output on GPIO (low current) */
+ SPIRIT_GPIO_MODE_DIGITAL_OUTPUT_HP = 0x03 /*!< Digital Output on GPIO (high current) */
+}SpiritGpioMode;
+
+#define IS_SPIRIT_GPIO_MODE(MODE) ((MODE == SPIRIT_GPIO_MODE_DIGITAL_INPUT) || \
+ (MODE == SPIRIT_GPIO_MODE_DIGITAL_OUTPUT_LP) || \
+ (MODE == SPIRIT_GPIO_MODE_DIGITAL_OUTPUT_HP))
+
+
+
+/**
+ * @brief SPIRIT I/O selection enumeration.
+ */
+typedef enum
+{
+ SPIRIT_GPIO_DIG_OUT_IRQ = 0x00, /*!< nIRQ (Interrupt Request, active low) , default configuration after POR */
+ SPIRIT_GPIO_DIG_OUT_POR_INV = 0x08, /*!< POR inverted (active low) */
+ SPIRIT_GPIO_DIG_OUT_WUT_EXP = 0x10, /*!< Wake-Up Timer expiration: "1" when WUT has expired */
+ SPIRIT_GPIO_DIG_OUT_LBD = 0x18, /*!< Low battery detection: "1" when battery is below threshold setting */
+ SPIRIT_GPIO_DIG_OUT_TX_DATA = 0x20, /*!< TX data internal clock output (TX data are sampled on the rising edge of it) */
+ SPIRIT_GPIO_DIG_OUT_TX_STATE = 0x28, /*!< TX state indication: "1" when Spirit1 is passing in the TX state */
+ SPIRIT_GPIO_DIG_OUT_TX_FIFO_ALMOST_EMPTY = 0x30, /*!< TX FIFO Almost Empty Flag */
+ SPIRIT_GPIO_DIG_OUT_TX_FIFO_ALMOST_FULL = 0x38, /*!< TX FIFO Almost Full Flag */
+ SPIRIT_GPIO_DIG_OUT_RX_DATA = 0x40, /*!< RX data output */
+ SPIRIT_GPIO_DIG_OUT_RX_CLOCK = 0x48, /*!< RX clock output (recovered from received data) */
+ SPIRIT_GPIO_DIG_OUT_RX_STATE = 0x50, /*!< RX state indication: "1" when Spirit1 is passing in the RX state */
+ SPIRIT_GPIO_DIG_OUT_RX_FIFO_ALMOST_FULL = 0x58, /*!< RX FIFO Almost Full Flag */
+ SPIRIT_GPIO_DIG_OUT_RX_FIFO_ALMOST_EMPTY = 0x60, /*!< RX FIFO Almost Empty Flag */
+ SPIRIT_GPIO_DIG_OUT_ANTENNA_SWITCH = 0x68, /*!< Antenna switch used for antenna diversity */
+ SPIRIT_GPIO_DIG_OUT_VALID_PREAMBLE = 0x70, /*!< Valid Preamble Detected Flag */
+ SPIRIT_GPIO_DIG_OUT_SYNC_DETECTED = 0x78, /*!< Sync WordSync Word Detected Flag */
+ SPIRIT_GPIO_DIG_OUT_RSSI_THRESHOLD = 0x80, /*!< RSSI above threshold */
+ SPIRIT_GPIO_DIG_OUT_MCU_CLOCK = 0x88, /*!< MCU Clock */
+ SPIRIT_GPIO_DIG_OUT_TX_RX_MODE = 0x90, /*!< TX or RX mode indicator (to enable an external range extender) */
+ SPIRIT_GPIO_DIG_OUT_VDD = 0x98, /*!< VDD (to emulate an additional GPIO of the MCU, programmable by SPI) */
+ SPIRIT_GPIO_DIG_OUT_GND = 0xA0, /*!< GND (to emulate an additional GPIO of the MCU, programmable by SPI) */
+ SPIRIT_GPIO_DIG_OUT_SMPS_EXT = 0xA8, /*!< External SMPS enable signal (active high) */
+ SPIRIT_GPIO_DIG_OUT_SLEEP_OR_STANDBY = 0xB0,
+ SPIRIT_GPIO_DIG_OUT_READY = 0xB8,
+ SPIRIT_GPIO_DIG_OUT_LOCK = 0xC0,
+ SPIRIT_GPIO_DIG_OUT_WAIT_FOR_LOCK_SIG = 0xC8,
+ SPIRIT_GPIO_DIG_OUT_WAIT_FOR_TIMER_FOR_LOCK = 0xD0,
+ SPIRIT_GPIO_DIG_OUT_WAIT_FOR_READY2_SIG = 0xD8,
+ SPIRIT_GPIO_DIG_OUT_WAIT_FOR_TIMER_FOR_PM_SET = 0xE0,
+ SPIRIT_GPIO_DIG_OUT_WAIT_VCO_CALIBRATION = 0xE8,
+ SPIRIT_GPIO_DIG_OUT_ENABLE_SYNTH_FULL_CIRCUIT = 0xF0,
+ SPIRIT_GPIO_DIG_OUT_WAIT_FOR_RCCAL_OK_SIG = 0xFF,
+
+ SPIRIT_GPIO_DIG_IN_TX_COMMAND = 0x00,
+ SPIRIT_GPIO_DIG_IN_RX_COMMAND = 0x08,
+ SPIRIT_GPIO_DIG_IN_TX_DATA_INPUT_FOR_DIRECTRF = 0x10,
+ SPIRIT_GPIO_DIG_IN_DATA_WAKEUP = 0x18,
+ SPIRIT_GPIO_DIG_IN_EXT_CLOCK_AT_34_7KHZ = 0x20
+
+}SpiritGpioIO;
+
+#define IS_SPIRIT_GPIO_IO(IO_SEL) ((IO_SEL == SPIRIT_GPIO_DIG_OUT_IRQ) || \
+ (IO_SEL == SPIRIT_GPIO_DIG_OUT_POR_INV) || \
+ (IO_SEL == SPIRIT_GPIO_DIG_OUT_WUT_EXP) || \
+ (IO_SEL == SPIRIT_GPIO_DIG_OUT_LBD) || \
+ (IO_SEL == SPIRIT_GPIO_DIG_OUT_TX_DATA) || \
+ (IO_SEL == SPIRIT_GPIO_DIG_OUT_TX_STATE) || \
+ (IO_SEL == SPIRIT_GPIO_DIG_OUT_TX_FIFO_ALMOST_EMPTY) || \
+ (IO_SEL == SPIRIT_GPIO_DIG_OUT_TX_FIFO_ALMOST_FULL) || \
+ (IO_SEL == SPIRIT_GPIO_DIG_OUT_RX_DATA) || \
+ (IO_SEL == SPIRIT_GPIO_DIG_OUT_RX_CLOCK) || \
+ (IO_SEL == SPIRIT_GPIO_DIG_OUT_RX_STATE) || \
+ (IO_SEL == SPIRIT_GPIO_DIG_OUT_RX_FIFO_ALMOST_FULL) || \
+ (IO_SEL == SPIRIT_GPIO_DIG_OUT_RX_FIFO_ALMOST_EMPTY) || \
+ (IO_SEL == SPIRIT_GPIO_DIG_OUT_ANTENNA_SWITCH) || \
+ (IO_SEL == SPIRIT_GPIO_DIG_OUT_VALID_PREAMBLE) || \
+ (IO_SEL == SPIRIT_GPIO_DIG_OUT_SYNC_DETECTED) || \
+ (IO_SEL == SPIRIT_GPIO_DIG_OUT_RSSI_THRESHOLD) || \
+ (IO_SEL == SPIRIT_GPIO_DIG_OUT_MCU_CLOCK) || \
+ (IO_SEL == SPIRIT_GPIO_DIG_OUT_TX_RX_MODE) || \
+ (IO_SEL == SPIRIT_GPIO_DIG_OUT_VDD) || \
+ (IO_SEL == SPIRIT_GPIO_DIG_OUT_GND) || \
+ (IO_SEL == SPIRIT_GPIO_DIG_OUT_SMPS_EXT) ||\
+ (IO_SEL == SPIRIT_GPIO_DIG_OUT_SLEEP_OR_STANDBY) ||\
+ (IO_SEL == SPIRIT_GPIO_DIG_OUT_READY) ||\
+ (IO_SEL == SPIRIT_GPIO_DIG_OUT_LOCK) ||\
+ (IO_SEL == SPIRIT_GPIO_DIG_OUT_WAIT_FOR_LOCK_SIG) ||\
+ (IO_SEL == SPIRIT_GPIO_DIG_OUT_WAIT_FOR_TIMER_FOR_LOCK) ||\
+ (IO_SEL == SPIRIT_GPIO_DIG_OUT_WAIT_FOR_READY2_SIG) ||\
+ (IO_SEL == SPIRIT_GPIO_DIG_OUT_WAIT_FOR_TIMER_FOR_PM_SET) ||\
+ (IO_SEL == SPIRIT_GPIO_DIG_OUT_WAIT_VCO_CALIBRATION) ||\
+ (IO_SEL == SPIRIT_GPIO_DIG_OUT_ENABLE_SYNTH_FULL_CIRCUIT) ||\
+ (IO_SEL == SPIRIT_GPIO_DIG_OUT_WAIT_FOR_RCCAL_OK_SIG) ||\
+ (IO_SEL == SPIRIT_GPIO_DIG_IN_TX_COMMAND) ||\
+ (IO_SEL == SPIRIT_GPIO_DIG_IN_RX_COMMAND) ||\
+ (IO_SEL == SPIRIT_GPIO_DIG_IN_TX_DATA_INPUT_FOR_DIRECTRF) ||\
+ (IO_SEL == SPIRIT_GPIO_DIG_IN_DATA_WAKEUP) ||\
+ (IO_SEL == SPIRIT_GPIO_DIG_IN_EXT_CLOCK_AT_34_7KHZ))
+
+/**
+ * @brief SPIRIT OutputLevel enumeration.
+ */
+
+typedef enum
+{
+ LOW = 0,
+ HIGH = !LOW
+}OutputLevel;
+
+#define IS_SPIRIT_GPIO_LEVEL(LEVEL) ((LEVEL == LOW) || \
+ (LEVEL == HIGH))
+
+
+/**
+ * @brief SPIRIT GPIO Init structure definition.
+ */
+typedef struct
+{
+ SpiritGpioPin xSpiritGpioPin; /*!< Specifies the GPIO pins to be configured.
+ This parameter can be any value of @ref SpiritGpioPin */
+
+ SpiritGpioMode xSpiritGpioMode; /*!< Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref SpiritGpioMode */
+
+ SpiritGpioIO xSpiritGpioIO; /*!< Specifies the I/O selection for the selected pins.
+ This parameter can be a value of @ref SpiritGpioIO */
+
+}SGpioInit;
+
+
+
+/**
+ * @brief SPIRIT clock output XO prescaler enumeration.
+ */
+
+typedef enum
+{
+ XO_RATIO_1 = 0x00, /*!< XO Clock signal available on the GPIO divided by 1 */
+ XO_RATIO_2_3 = 0x02, /*!< XO Clock signal available on the GPIO divided by 2/3 */
+ XO_RATIO_1_2 = 0x04, /*!< XO Clock signal available on the GPIO divided by 1/2 */
+ XO_RATIO_1_3 = 0x06, /*!< XO Clock signal available on the GPIO divided by 1/3 */
+ XO_RATIO_1_4 = 0x08, /*!< XO Clock signal available on the GPIO divided by 1/4 */
+ XO_RATIO_1_6 = 0x0A, /*!< XO Clock signal available on the GPIO divided by 1/6 */
+ XO_RATIO_1_8 = 0x0C, /*!< XO Clock signal available on the GPIO divided by 1/8 */
+ XO_RATIO_1_12 = 0x0E, /*!< XO Clock signal available on the GPIO divided by 1/12 */
+ XO_RATIO_1_16 = 0x10, /*!< XO Clock signal available on the GPIO divided by 1/16 */
+ XO_RATIO_1_24 = 0x12, /*!< XO Clock signal available on the GPIO divided by 1/24 */
+ XO_RATIO_1_36 = 0x14, /*!< XO Clock signal available on the GPIO divided by 1/36 */
+ XO_RATIO_1_48 = 0x16, /*!< XO Clock signal available on the GPIO divided by 1/48 */
+ XO_RATIO_1_64 = 0x18, /*!< XO Clock signal available on the GPIO divided by 1/64 */
+ XO_RATIO_1_96 = 0x1A, /*!< XO Clock signal available on the GPIO divided by 1/96 */
+ XO_RATIO_1_128 = 0x1C, /*!< XO Clock signal available on the GPIO divided by 1/128 */
+ XO_RATIO_1_192 = 0x1E /*!< XO Clock signal available on the GPIO divided by 1/196 */
+}ClockOutputXOPrescaler;
+
+#define IS_SPIRIT_CLOCK_OUTPUT_XO(RATIO) ((RATIO == XO_RATIO_1) || \
+ (RATIO == XO_RATIO_2_3) || \
+ (RATIO == XO_RATIO_1_2) || \
+ (RATIO == XO_RATIO_1_3) || \
+ (RATIO == XO_RATIO_1_4) || \
+ (RATIO == XO_RATIO_1_6) || \
+ (RATIO == XO_RATIO_1_8) || \
+ (RATIO == XO_RATIO_1_12) || \
+ (RATIO == XO_RATIO_1_16) || \
+ (RATIO == XO_RATIO_1_24) || \
+ (RATIO == XO_RATIO_1_36) || \
+ (RATIO == XO_RATIO_1_48) || \
+ (RATIO == XO_RATIO_1_64) || \
+ (RATIO == XO_RATIO_1_96) || \
+ (RATIO == XO_RATIO_1_128) || \
+ (RATIO == XO_RATIO_1_192))
+
+/**
+ * @brief SPIRIT Clock Output RCO prescaler enumeration.
+ */
+
+typedef enum
+{
+ RCO_RATIO_1 = 0x00, /*!< RCO Clock signal available on the GPIO divided by 1 */
+ RCO_RATIO_1_128 = 0x01 /*!< RCO Clock signal available on the GPIO divided by 1/128 */
+}ClockOutputRCOPrescaler;
+
+#define IS_SPIRIT_CLOCK_OUTPUT_RCO(RATIO) ((RATIO == RCO_RATIO_1) || \
+ (RATIO == RCO_RATIO_1_128))
+
+/**
+ * @brief SPIRIT ExtraClockCycles enumeration.
+ */
+
+typedef enum
+{
+EXTRA_CLOCK_CYCLES_0 = 0x00, /*!< 0 extra clock cycles provided to the MCU before switching to STANDBY state */
+EXTRA_CLOCK_CYCLES_64 = 0x20, /*!< 64 extra clock cycles provided to the MCU before switching to STANDBY state */
+EXTRA_CLOCK_CYCLES_256 = 0x40, /*!< 256 extra clock cycles provided to the MCU before switching to STANDBY state */
+EXTRA_CLOCK_CYCLES_512 = 0x60 /*!< 512 extra clock cycles provided to the MCU before switching to STANDBY state */
+}ExtraClockCycles;
+
+#define IS_SPIRIT_CLOCK_OUTPUT_EXTRA_CYCLES(CYCLES) ((CYCLES == EXTRA_CLOCK_CYCLES_0) || \
+ (CYCLES == EXTRA_CLOCK_CYCLES_64) || \
+ (CYCLES == EXTRA_CLOCK_CYCLES_256) || \
+ (CYCLES == EXTRA_CLOCK_CYCLES_512))
+
+
+/**
+ * @brief SPIRIT Clock Output initialization structure definition.
+ */
+typedef struct
+{
+ ClockOutputXOPrescaler xClockOutputXOPrescaler; /*!< Specifies the XO Ratio as clock output.
+ This parameter can be any value of @ref ClockOutputXOPrescaler */
+
+ ClockOutputRCOPrescaler xClockOutputRCOPrescaler; /*!< Specifies the RCO Ratio as clock output.
+ This parameter can be a value of @ref ClockOutputRCOPrescaler */
+
+ ExtraClockCycles xExtraClockCycles; /*!< Specifies the Extra Clock Cycles provided before entering in Standby State.
+ This parameter can be a value of @ref ExtraClockCycles */
+
+}ClockOutputInit;
+
+
+
+/**
+ * @}
+ */
+
+
+
+/** @defgroup Gpio_Exported_Constants GPIO Exported Constants
+ * @{
+ */
+
+
+/**
+ * @}
+ */
+
+
+
+/** @defgroup Gpio_Exported_Macros GPIO Exported Macros
+ * @{
+ */
+
+
+/**
+ * @}
+ */
+
+
+
+/** @defgroup Gpio_Exported_Functions GPIO Exported Functions
+ * @{
+ */
+
+void SpiritGpioInit(SGpioInit* pxGpioInitStruct);
+void SpiritGpioTemperatureSensor(SpiritFunctionalState xNewState);
+void SpiritGpioSetLevel(SpiritGpioPin xGpioX, OutputLevel xLevel);
+OutputLevel SpiritGpioGetLevel(SpiritGpioPin xGpioX);
+void SpiritGpioClockOutput(SpiritFunctionalState xNewState);
+void SpiritGpioClockOutputInit(ClockOutputInit* pxClockOutputInitStruct);
+void SpiritGpioSetXOPrescaler(ClockOutputXOPrescaler xXOPrescaler);
+ClockOutputXOPrescaler SpiritGpioGetXOPrescaler(void);
+void SpiritGpioSetRCOPrescaler(ClockOutputRCOPrescaler xRCOPrescaler);
+ClockOutputRCOPrescaler SpiritGpioGetRCOPrescaler(void);
+void SpiritGpioSetExtraClockCycles(ExtraClockCycles xExtraCycles);
+ExtraClockCycles SpiritGpioGetExtraClockCycles(void);
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+/******************* (C) COPYRIGHT 2015 STMicroelectronics *****END OF FILE****/
Repository toolbox
| Export to desktop IDE |
Repository details
| Type: | Library |
|---|---|
| Created: | 05 Jul 2017 |
| Imports: | 273 |
| Forks: | 2 |
| Commits: | 83 |
| Dependents: | 0 |
| Dependencies: | 0 |
| Followers: | 410 |
The code in this repository is Apache licensed.
Components
X-NUCLEO-IDS01A4 Sub-1GHz RF Expansion Board