Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.

Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo

Currently supported boards:

Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:

  • Unmount resistor R4
  • Mount resistor R7

Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!

This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).

Revision:
67:93bec0baf1de
Parent:
34:edda6a7238ec
--- a/source/libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_Config.h	Wed Jul 05 14:02:16 2017 +0200
+++ b/source/libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_Config.h	Thu Jul 06 11:13:31 2017 +0200
@@ -1,147 +1,147 @@
-/**
-  ******************************************************************************
- * @file    SPIRIT_Config.h
-  * @author  VMA division - AMS
-  * @version 3.2.2
-  * @date    08-July-2015
-  * @brief   Spirit Configuration and useful defines 
-  * 
- * @details
- *
- * This file is used to include all or a part of the Spirit
- * libraries into the application program which will be used.
- * Moreover some important parameters are defined here and the
- * user is allowed to edit them.
- *
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
-  ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __SPIRIT_CONFIG_H
-#define __SPIRIT_CONFIG_H
-
-
-  /* Includes ------------------------------------------------------------------*/
-#include "SPIRIT_Regs.h"
-#include "SPIRIT_Aes.h"
-#include "SPIRIT_Calibration.h"
-#include "SPIRIT_Commands.h"
-#include "SPIRIT_Csma.h"
-#include "SPIRIT_DirectRF.h"
-#include "SPIRIT_General.h"
-#include "SPIRIT_Gpio.h"
-#include "SPIRIT_Irq.h"
-#include "SPIRIT_Timer.h"
-#include "SPIRIT_LinearFifo.h"
-#include "SPIRIT_PktBasic.h"
-#include "SPIRIT_PktMbus.h"
-#include "SPIRIT_PktStack.h"
-
-#include "SPIRIT_Qi.h"
-#include "SPIRIT_Radio.h"
-#include "MCU_Interface.h"
-#include "SPIRIT_Types.h"
-#include "SPIRIT_Management.h"
-
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-/** @addtogroup SPIRIT_Libraries        SPIRIT Libraries
- * @brief This firmware implements libraries which allow the user
- * to manage the features of Spirit without knowing the hardware details.
- * @details The <i>SPIRIT_Libraries</i> modules are totally platform independent. The library provides one
- * module for each device feature. Each module refers to some functions whose prototypes are located in the
- * header file <i>@ref MCU_Interface.h</i>. The user who want to use these libraries on a particular
- * platform has to implement these functions respecting them signatures.
- * @{
- */
-
-/** @defgroup SPIRIT_Configuration      Configuration
- * @brief Spirit Configuration and useful defines.
- * @details See the file <i>@ref SPIRIT_Config.h</i> for more details.
- * @{
- */
-
-
-/** @defgroup Configuration_Exported_Types      Configuration Exported Types
- * @{
- */
-
-/**
- * @}
- */
-
-
-/** @defgroup Configuration_Exported_Constants  Configuration Exported Constants
- * @{
- */
-#define DOUBLE_XTAL_THR                         30000000
-
-/**
- * @}
- */
-
-
-/** @defgroup Configuration_Exported_Macros     Configuration Exported Macros
- * @{
- */
-
-/**
- * @}
- */
-
-
-/** @defgroup Configuration_Exported_Functions  Configuration Exported Functions
- * @{
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-
-/**
- * @}
- */
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
-
-/******************* (C) COPYRIGHT 2015 STMicroelectronics *****END OF FILE****/
+/**
+  ******************************************************************************
+ * @file    SPIRIT_Config.h
+  * @author  VMA division - AMS
+  * @version 3.2.2
+  * @date    08-July-2015
+  * @brief   Spirit Configuration and useful defines 
+  * 
+ * @details
+ *
+ * This file is used to include all or a part of the Spirit
+ * libraries into the application program which will be used.
+ * Moreover some important parameters are defined here and the
+ * user is allowed to edit them.
+ *
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+  ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __SPIRIT_CONFIG_H
+#define __SPIRIT_CONFIG_H
+
+
+  /* Includes ------------------------------------------------------------------*/
+#include "SPIRIT_Regs.h"
+#include "SPIRIT_Aes.h"
+#include "SPIRIT_Calibration.h"
+#include "SPIRIT_Commands.h"
+#include "SPIRIT_Csma.h"
+#include "SPIRIT_DirectRF.h"
+#include "SPIRIT_General.h"
+#include "SPIRIT_Gpio.h"
+#include "SPIRIT_Irq.h"
+#include "SPIRIT_Timer.h"
+#include "SPIRIT_LinearFifo.h"
+#include "SPIRIT_PktBasic.h"
+#include "SPIRIT_PktMbus.h"
+#include "SPIRIT_PktStack.h"
+
+#include "SPIRIT_Qi.h"
+#include "SPIRIT_Radio.h"
+#include "MCU_Interface.h"
+#include "SPIRIT_Types.h"
+#include "SPIRIT_Management.h"
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/** @addtogroup SPIRIT_Libraries        SPIRIT Libraries
+ * @brief This firmware implements libraries which allow the user
+ * to manage the features of Spirit without knowing the hardware details.
+ * @details The <i>SPIRIT_Libraries</i> modules are totally platform independent. The library provides one
+ * module for each device feature. Each module refers to some functions whose prototypes are located in the
+ * header file <i>@ref MCU_Interface.h</i>. The user who want to use these libraries on a particular
+ * platform has to implement these functions respecting them signatures.
+ * @{
+ */
+
+/** @defgroup SPIRIT_Configuration      Configuration
+ * @brief Spirit Configuration and useful defines.
+ * @details See the file <i>@ref SPIRIT_Config.h</i> for more details.
+ * @{
+ */
+
+
+/** @defgroup Configuration_Exported_Types      Configuration Exported Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup Configuration_Exported_Constants  Configuration Exported Constants
+ * @{
+ */
+#define DOUBLE_XTAL_THR                         30000000
+
+/**
+ * @}
+ */
+
+
+/** @defgroup Configuration_Exported_Macros     Configuration Exported Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup Configuration_Exported_Functions  Configuration Exported Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+/******************* (C) COPYRIGHT 2015 STMicroelectronics *****END OF FILE****/