Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.
Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo
Currently supported boards:
Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:
- Unmount resistor
R4 - Mount resistor
R7
Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!
This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).
Diff: source/libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_Aes.h
- Revision:
- 67:93bec0baf1de
- Parent:
- 34:edda6a7238ec
--- a/source/libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_Aes.h Wed Jul 05 14:02:16 2017 +0200
+++ b/source/libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_Aes.h Thu Jul 06 11:13:31 2017 +0200
@@ -1,205 +1,205 @@
-/**
- ******************************************************************************
- * @file SPIRIT_Aes.h
- * @author VMA division - AMS
- * @version 3.2.2
- * @date 08-July-2015
- * @brief Configuration and management of SPIRIT AES Engine.
- *
- * @details
- *
- * In order to encrypt data, the user must manage the AES_END IRQ.
- * The data have to be splitted in blocks of 16 bytes and written
- * into the <i>AES DATA IN registers</i>. Then, after the key is written
- * into the <i>AES KEY registers</i>, a command of <i>Execute encryption</i>
- * has to be sent.
- *
- * <b>Example:</b>
- * @code
- *
- * SpiritAesWriteDataIn(data_buff , N_BYTES);
- * SpiritAesExecuteEncryption();
- *
- * while(!aes_end_flag); // the flag is set by the ISR routine which manages the AES_END irq
- * aes_end_flag=RESET;
- *
- * SpiritAesReadDataOut(enc_data_buff , N_BYTES);
- *
- * @endcode
- *
- * In order to decrypt data, the user must manage the AES_END IRQ and have a decryption key.
- * There are two operative modes to make the data decryption:
- * <ul>
- * <li> Derive the decryption key from the encryption key and decrypt data directly
- * using the <i>SpiritAesDeriveDecKeyExecuteDec()</i> function
- *
- * <b>Example:</b>
- * @code
- *
- * SpiritAesWriteDataIn(enc_data_buff , N_BYTES);
- * SpiritAesDeriveDecKeyExecuteDec();
- *
- * while(!aes_end_flag); // the flag is set by the ISR routine which manages the AES_END irq
- * aes_end_flag=RESET;
- *
- * SpiritAesReadDataOut(data_buff , N_BYTES);
- *
- * @endcode
- * </li>
- *
- * <li> Derive the decryption key from the encryption key using the <i>SpiritAesDeriveDecKeyFromEnc()</i>
- * function, store it into the <i>AES KEY registers</i> and then decrypt data using the
- * <i>SpiritAesExecuteDecryption()</i> function
- *
- * <b>Example:</b>
- * @code
- *
- * SpiritAesWriteDataIn(key_enc , 16);
- * SpiritAesDeriveDecKeyFromEnc();
- *
- * while(!aes_end_flag); // the flag is set by the ISR routine which manages the AES_END irq
- * aes_end_flag=RESET;
- *
- * SpiritAesReadDataOut(key_dec , 16);
- *
- * SpiritAesWriteKey(key_dec);
- * SpiritAesWriteDataIn(enc_data_buff , 16);
- * SpiritAesExecuteDecryption();
- *
- * while(!aes_end_flag); // the flag is set by the ISR routine which manages the AES_END irq
- * aes_end_flag=RESET;
- *
- * SpiritAesReadDataOut(data_buff , N_BYTES);
- *
- * @endcode
- * </li>
- * </ul>
- *
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __SPIRIT_AES_H
-#define __SPIRIT_AES_H
-
-
-/* Includes ------------------------------------------------------------------*/
-
-#include "SPIRIT_Regs.h"
-#include "SPIRIT_Types.h"
-
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-
-/**
- * @addtogroup SPIRIT_Libraries
- * @{
- */
-
-
-/**
- * @defgroup SPIRIT_Aes AES
- * @brief Configuration and management of SPIRIT AES Engine.
- * @details See the file <i>@ref SPIRIT_Aes.h</i> for more details.
- * @{
- */
-
-/**
- * @defgroup Aes_Exported_Types AES Exported Types
- * @{
- */
-
-/**
- * @}
- */
-
-
-/**
- * @defgroup Aes_Exported_Constants AES Exported Constants
- * @{
- */
-
-
-/**
- * @}
- */
-
-
-/**
- * @defgroup Aes_Exported_Macros AES Exported Macros
- * @{
- */
-
-
-/**
- * @}
- */
-
-
-/**
- * @defgroup Aes_Exported_Functions AES Exported Functions
- * @{
- */
-
-void SpiritAesMode(SpiritFunctionalState xNewState);
-void SpiritAesWriteDataIn(uint8_t* pcBufferDataIn, uint8_t cDataLength);
-void SpiritAesReadDataOut(uint8_t* pcBufferDataOut, uint8_t cDataLength);
-void SpiritAesWriteKey(uint8_t* pcKey);
-void SpiritAesReadKey(uint8_t* pcKey);
-void SpiritAesDeriveDecKeyFromEnc(void);
-void SpiritAesExecuteEncryption(void);
-void SpiritAesExecuteDecryption(void);
-void SpiritAesDeriveDecKeyExecuteDec(void);
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-
-/**
- * @}
- */
-
-
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
-
-/******************* (C) COPYRIGHT 2015 STMicroelectronics *****END OF FILE****/
+/**
+ ******************************************************************************
+ * @file SPIRIT_Aes.h
+ * @author VMA division - AMS
+ * @version 3.2.2
+ * @date 08-July-2015
+ * @brief Configuration and management of SPIRIT AES Engine.
+ *
+ * @details
+ *
+ * In order to encrypt data, the user must manage the AES_END IRQ.
+ * The data have to be splitted in blocks of 16 bytes and written
+ * into the <i>AES DATA IN registers</i>. Then, after the key is written
+ * into the <i>AES KEY registers</i>, a command of <i>Execute encryption</i>
+ * has to be sent.
+ *
+ * <b>Example:</b>
+ * @code
+ *
+ * SpiritAesWriteDataIn(data_buff , N_BYTES);
+ * SpiritAesExecuteEncryption();
+ *
+ * while(!aes_end_flag); // the flag is set by the ISR routine which manages the AES_END irq
+ * aes_end_flag=RESET;
+ *
+ * SpiritAesReadDataOut(enc_data_buff , N_BYTES);
+ *
+ * @endcode
+ *
+ * In order to decrypt data, the user must manage the AES_END IRQ and have a decryption key.
+ * There are two operative modes to make the data decryption:
+ * <ul>
+ * <li> Derive the decryption key from the encryption key and decrypt data directly
+ * using the <i>SpiritAesDeriveDecKeyExecuteDec()</i> function
+ *
+ * <b>Example:</b>
+ * @code
+ *
+ * SpiritAesWriteDataIn(enc_data_buff , N_BYTES);
+ * SpiritAesDeriveDecKeyExecuteDec();
+ *
+ * while(!aes_end_flag); // the flag is set by the ISR routine which manages the AES_END irq
+ * aes_end_flag=RESET;
+ *
+ * SpiritAesReadDataOut(data_buff , N_BYTES);
+ *
+ * @endcode
+ * </li>
+ *
+ * <li> Derive the decryption key from the encryption key using the <i>SpiritAesDeriveDecKeyFromEnc()</i>
+ * function, store it into the <i>AES KEY registers</i> and then decrypt data using the
+ * <i>SpiritAesExecuteDecryption()</i> function
+ *
+ * <b>Example:</b>
+ * @code
+ *
+ * SpiritAesWriteDataIn(key_enc , 16);
+ * SpiritAesDeriveDecKeyFromEnc();
+ *
+ * while(!aes_end_flag); // the flag is set by the ISR routine which manages the AES_END irq
+ * aes_end_flag=RESET;
+ *
+ * SpiritAesReadDataOut(key_dec , 16);
+ *
+ * SpiritAesWriteKey(key_dec);
+ * SpiritAesWriteDataIn(enc_data_buff , 16);
+ * SpiritAesExecuteDecryption();
+ *
+ * while(!aes_end_flag); // the flag is set by the ISR routine which manages the AES_END irq
+ * aes_end_flag=RESET;
+ *
+ * SpiritAesReadDataOut(data_buff , N_BYTES);
+ *
+ * @endcode
+ * </li>
+ * </ul>
+ *
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __SPIRIT_AES_H
+#define __SPIRIT_AES_H
+
+
+/* Includes ------------------------------------------------------------------*/
+
+#include "SPIRIT_Regs.h"
+#include "SPIRIT_Types.h"
+
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+
+/**
+ * @addtogroup SPIRIT_Libraries
+ * @{
+ */
+
+
+/**
+ * @defgroup SPIRIT_Aes AES
+ * @brief Configuration and management of SPIRIT AES Engine.
+ * @details See the file <i>@ref SPIRIT_Aes.h</i> for more details.
+ * @{
+ */
+
+/**
+ * @defgroup Aes_Exported_Types AES Exported Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/**
+ * @defgroup Aes_Exported_Constants AES Exported Constants
+ * @{
+ */
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @defgroup Aes_Exported_Macros AES Exported Macros
+ * @{
+ */
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @defgroup Aes_Exported_Functions AES Exported Functions
+ * @{
+ */
+
+void SpiritAesMode(SpiritFunctionalState xNewState);
+void SpiritAesWriteDataIn(uint8_t* pcBufferDataIn, uint8_t cDataLength);
+void SpiritAesReadDataOut(uint8_t* pcBufferDataOut, uint8_t cDataLength);
+void SpiritAesWriteKey(uint8_t* pcKey);
+void SpiritAesReadKey(uint8_t* pcKey);
+void SpiritAesDeriveDecKeyFromEnc(void);
+void SpiritAesExecuteEncryption(void);
+void SpiritAesExecuteDecryption(void);
+void SpiritAesDeriveDecKeyExecuteDec(void);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+/******************* (C) COPYRIGHT 2015 STMicroelectronics *****END OF FILE****/
X-NUCLEO-IDS01A4 Sub-1GHz RF Expansion Board