ST / stm-spirit1-rf-driver

Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.

Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo

Currently supported boards:

Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:

  • Unmount resistor R4
  • Mount resistor R7

Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!

This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).

Diff: stm-spirit1-rf-driver/radio_spi.h

Revision:
78:65de72417cd3
Parent:
67:93bec0baf1de
--- a/stm-spirit1-rf-driver/radio_spi.h	Thu Jan 18 15:07:23 2018 +0100
+++ b/stm-spirit1-rf-driver/radio_spi.h	Thu Feb 01 16:15:57 2018 +0100
@@ -52,7 +52,7 @@
 // #include "stm32f4xx_hal.h"
 #endif
 #include "SPIRIT_Config.h"
-#include "radio_spi.h" 
+// #include "radio_spi.h"
 // #include "spirit1-arch.h"
 
 /**