Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.
Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo
Currently supported boards:
Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:
- Unmount resistor
R4 - Mount resistor
R7
Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!
This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).
Diff: libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_Config.h
- Revision:
- 0:4fb29d9ee571
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_Config.h Thu Oct 13 15:41:39 2016 +0200
@@ -0,0 +1,147 @@
+/**
+ ******************************************************************************
+ * @file SPIRIT_Config.h
+ * @author VMA division - AMS
+ * @version 3.2.2
+ * @date 08-July-2015
+ * @brief Spirit Configuration and useful defines
+ *
+ * @details
+ *
+ * This file is used to include all or a part of the Spirit
+ * libraries into the application program which will be used.
+ * Moreover some important parameters are defined here and the
+ * user is allowed to edit them.
+ *
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __SPIRIT_CONFIG_H
+#define __SPIRIT_CONFIG_H
+
+
+ /* Includes ------------------------------------------------------------------*/
+#include "SPIRIT_Regs.h"
+#include "SPIRIT_Aes.h"
+#include "SPIRIT_Calibration.h"
+#include "SPIRIT_Commands.h"
+#include "SPIRIT_Csma.h"
+#include "SPIRIT_DirectRF.h"
+#include "SPIRIT_General.h"
+#include "SPIRIT_Gpio.h"
+#include "SPIRIT_Irq.h"
+#include "SPIRIT_Timer.h"
+#include "SPIRIT_LinearFifo.h"
+#include "SPIRIT_PktBasic.h"
+#include "SPIRIT_PktMbus.h"
+#include "SPIRIT_PktStack.h"
+
+#include "SPIRIT_Qi.h"
+#include "SPIRIT_Radio.h"
+#include "MCU_Interface.h"
+#include "SPIRIT_Types.h"
+#include "SPIRIT_Management.h"
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/** @addtogroup SPIRIT_Libraries SPIRIT Libraries
+ * @brief This firmware implements libraries which allow the user
+ * to manage the features of Spirit without knowing the hardware details.
+ * @details The <i>SPIRIT_Libraries</i> modules are totally platform independent. The library provides one
+ * module for each device feature. Each module refers to some functions whose prototypes are located in the
+ * header file <i>@ref MCU_Interface.h</i>. The user who want to use these libraries on a particular
+ * platform has to implement these functions respecting them signatures.
+ * @{
+ */
+
+/** @defgroup SPIRIT_Configuration Configuration
+ * @brief Spirit Configuration and useful defines.
+ * @details See the file <i>@ref SPIRIT_Config.h</i> for more details.
+ * @{
+ */
+
+
+/** @defgroup Configuration_Exported_Types Configuration Exported Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup Configuration_Exported_Constants Configuration Exported Constants
+ * @{
+ */
+#define DOUBLE_XTAL_THR 30000000
+
+/**
+ * @}
+ */
+
+
+/** @defgroup Configuration_Exported_Macros Configuration Exported Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup Configuration_Exported_Functions Configuration Exported Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+/******************* (C) COPYRIGHT 2015 STMicroelectronics *****END OF FILE****/
X-NUCLEO-IDS01A4 Sub-1GHz RF Expansion Board