ST / stm-spirit1-rf-driver

Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.

Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo

Currently supported boards:

Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:

  • Unmount resistor R4
  • Mount resistor R7

Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!

This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).

Diff: libs/spirit1/SPIRIT1_Library/Src/SPIRIT_Types.c

Revision:
2:45642c5198a2
Parent:
0:4fb29d9ee571
Child:
4:07537ca85c66
--- a/libs/spirit1/SPIRIT1_Library/Src/SPIRIT_Types.c	Fri Oct 14 08:57:51 2016 +0200
+++ b/libs/spirit1/SPIRIT1_Library/Src/SPIRIT_Types.c	Fri Oct 14 10:42:56 2016 +0200
@@ -129,7 +129,7 @@
 void s_assert_failed(uint8_t* file, uint32_t line)
 {
   /* User can add his own implementation to report the file name and line number */
-  printf("Wrong parameters value: file %s on line %d\r\n", file, line);
+  printf("Wrong parameters value: file %s on line %d\r\n", file, (int)line);
 
   /* Infinite loop */
   while (1)