ST / stm-spirit1-rf-driver

Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.

Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo

Currently supported boards:

Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:

  • Unmount resistor R4
  • Mount resistor R7

Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!

This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).

module.json@35:f3f444c379d0, 2016-11-22 (annotated)

Committer:
Wolfgang Betz
Date:
Tue Nov 22 11:43:05 2016 +0100
Revision:
35:f3f444c379d0
Parent:
34:edda6a7238ec 
Adapt 'module.json'

Who changed what in which revision?

UserRevisionLine numberNew contents of line
Wolfgang Betz 34:edda6a7238ec 1 {
Wolfgang Betz 35:f3f444c379d0 2 "name": "stm-spirit1-rf-driver",
Wolfgang Betz 35:f3f444c379d0 3 "version": "0.0.1",
Wolfgang Betz 35:f3f444c379d0 4 "description": "RF driver for Atmel AT86RF233",
Wolfgang Betz 35:f3f444c379d0 5 "keywords": [
Wolfgang Betz 35:f3f444c379d0 6 "rf",
Wolfgang Betz 35:f3f444c379d0 7 "driver"
Wolfgang Betz 35:f3f444c379d0 8 ],
Wolfgang Betz 35:f3f444c379d0 9 "author": "Seppo TakaloWolfgang Betz <wolfgang.betz@st.com>",
Wolfgang Betz 35:f3f444c379d0 10 "dependencies": {
Wolfgang Betz 35:f3f444c379d0 11 "nanostack-libservice": "^3.0.0",
Wolfgang Betz 35:f3f444c379d0 12 "sal-stack-nanostack": "^5.0.0",
Wolfgang Betz 35:f3f444c379d0 13 "mbed-drivers": "^1.0.0"
Wolfgang Betz 35:f3f444c379d0 14 },
Wolfgang Betz 35:f3f444c379d0 15 "targetDependencies": {}
Wolfgang Betz 35:f3f444c379d0 16 "config": {
Wolfgang Betz 35:f3f444c379d0 17 "mac-address-0": "0x0",
Wolfgang Betz 35:f3f444c379d0 18 "mac-address-1": "0x0",
Wolfgang Betz 35:f3f444c379d0 19 "mac-address-2": "0x0",
Wolfgang Betz 35:f3f444c379d0 20 "mac-address-3": "0x0",
Wolfgang Betz 35:f3f444c379d0 21 "mac-address-4": "0x0",
Wolfgang Betz 35:f3f444c379d0 22 "mac-address-5": "0x0",
Wolfgang Betz 35:f3f444c379d0 23 "mac-address-6": "0x0",
Wolfgang Betz 35:f3f444c379d0 24 "mac-address-7": "0x0"
Wolfgang Betz 35:f3f444c379d0 25 },
Wolfgang Betz 35:f3f444c379d0 26 "macros": ["USE_STM32F4XX_NUCLEO", "X_NUCLEO_IDS01A4", "SPIRIT_USE_FULL_ASSERT"]
Wolfgang Betz 34:edda6a7238ec 27 }