ST / stm-spirit1-rf-driver

Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.

Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo

Currently supported boards:

Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:

  • Unmount resistor R4
  • Mount resistor R7

Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!

This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).

module.json@34:edda6a7238ec, 2016-11-22 (annotated)

Committer:
Wolfgang Betz
Date:
Tue Nov 22 11:40:10 2016 +0100
Revision:
34:edda6a7238ec
Child:
35:f3f444c379d0
Perform re-naming

Who changed what in which revision?

UserRevisionLine numberNew contents of line
Wolfgang Betz 34:edda6a7238ec 1 {
Wolfgang Betz 34:edda6a7238ec 2 "name": "spirit1",
Wolfgang Betz 34:edda6a7238ec 3 "config": {
Wolfgang Betz 34:edda6a7238ec 4 "mac-address-0": "0x0",
Wolfgang Betz 34:edda6a7238ec 5 "mac-address-1": "0x0",
Wolfgang Betz 34:edda6a7238ec 6 "mac-address-2": "0x0",
Wolfgang Betz 34:edda6a7238ec 7 "mac-address-3": "0x0",
Wolfgang Betz 34:edda6a7238ec 8 "mac-address-4": "0x0",
Wolfgang Betz 34:edda6a7238ec 9 "mac-address-5": "0x0",
Wolfgang Betz 34:edda6a7238ec 10 "mac-address-6": "0x0",
Wolfgang Betz 34:edda6a7238ec 11 "mac-address-7": "0x0"
Wolfgang Betz 34:edda6a7238ec 12 },
Wolfgang Betz 34:edda6a7238ec 13 "macros": ["USE_STM32F4XX_NUCLEO", "X_NUCLEO_IDS01A4", "SPIRIT_USE_FULL_ASSERT"]
Wolfgang Betz 34:edda6a7238ec 14 }