ST
Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.
Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo
Currently supported boards:
Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:
- Unmount resistor
R4 - Mount resistor
R7
Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!
This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).
libs/spirit1/SPIRIT1_Library/Src/SPIRIT_Gpio.c@0:4fb29d9ee571, 2016-10-13 (annotated)
- Committer:
- Wolfgang Betz
- Date:
- Thu Oct 13 15:41:39 2016 +0200
- Revision:
- 0:4fb29d9ee571
First compiling version (without warnings)
Who changed what in which revision?
| User | Revision | Line number | New contents of line |
|---|---|---|---|
| Wolfgang Betz |
0:4fb29d9ee571 | 1 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 2 | ****************************************************************************** |
| Wolfgang Betz |
0:4fb29d9ee571 | 3 | * @file SPIRIT_Gpio.c |
| Wolfgang Betz |
0:4fb29d9ee571 | 4 | * @author VMA division - AMS |
| Wolfgang Betz |
0:4fb29d9ee571 | 5 | * @version 3.2.2 |
| Wolfgang Betz |
0:4fb29d9ee571 | 6 | * @date 08-July-2015 |
| Wolfgang Betz |
0:4fb29d9ee571 | 7 | * @brief This file provides all the low level API to manage SPIRIT GPIO. |
| Wolfgang Betz |
0:4fb29d9ee571 | 8 | * @details |
| Wolfgang Betz |
0:4fb29d9ee571 | 9 | * |
| Wolfgang Betz |
0:4fb29d9ee571 | 10 | * @attention |
| Wolfgang Betz |
0:4fb29d9ee571 | 11 | * |
| Wolfgang Betz |
0:4fb29d9ee571 | 12 | * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> |
| Wolfgang Betz |
0:4fb29d9ee571 | 13 | * |
| Wolfgang Betz |
0:4fb29d9ee571 | 14 | * Redistribution and use in source and binary forms, with or without modification, |
| Wolfgang Betz |
0:4fb29d9ee571 | 15 | * are permitted provided that the following conditions are met: |
| Wolfgang Betz |
0:4fb29d9ee571 | 16 | * 1. Redistributions of source code must retain the above copyright notice, |
| Wolfgang Betz |
0:4fb29d9ee571 | 17 | * this list of conditions and the following disclaimer. |
| Wolfgang Betz |
0:4fb29d9ee571 | 18 | * 2. Redistributions in binary form must reproduce the above copyright notice, |
| Wolfgang Betz |
0:4fb29d9ee571 | 19 | * this list of conditions and the following disclaimer in the documentation |
| Wolfgang Betz |
0:4fb29d9ee571 | 20 | * and/or other materials provided with the distribution. |
| Wolfgang Betz |
0:4fb29d9ee571 | 21 | * 3. Neither the name of STMicroelectronics nor the names of its contributors |
| Wolfgang Betz |
0:4fb29d9ee571 | 22 | * may be used to endorse or promote products derived from this software |
| Wolfgang Betz |
0:4fb29d9ee571 | 23 | * without specific prior written permission. |
| Wolfgang Betz |
0:4fb29d9ee571 | 24 | * |
| Wolfgang Betz |
0:4fb29d9ee571 | 25 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| Wolfgang Betz |
0:4fb29d9ee571 | 26 | * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| Wolfgang Betz |
0:4fb29d9ee571 | 27 | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| Wolfgang Betz |
0:4fb29d9ee571 | 28 | * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
| Wolfgang Betz |
0:4fb29d9ee571 | 29 | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| Wolfgang Betz |
0:4fb29d9ee571 | 30 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
| Wolfgang Betz |
0:4fb29d9ee571 | 31 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
| Wolfgang Betz |
0:4fb29d9ee571 | 32 | * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
| Wolfgang Betz |
0:4fb29d9ee571 | 33 | * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| Wolfgang Betz |
0:4fb29d9ee571 | 34 | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| Wolfgang Betz |
0:4fb29d9ee571 | 35 | * |
| Wolfgang Betz |
0:4fb29d9ee571 | 36 | ****************************************************************************** |
| Wolfgang Betz |
0:4fb29d9ee571 | 37 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 38 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 39 | /* Includes ------------------------------------------------------------------*/ |
| Wolfgang Betz |
0:4fb29d9ee571 | 40 | #include "SPIRIT_Gpio.h" |
| Wolfgang Betz |
0:4fb29d9ee571 | 41 | #include "MCU_Interface.h" |
| Wolfgang Betz |
0:4fb29d9ee571 | 42 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 43 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 44 | /** @addtogroup SPIRIT_Libraries |
| Wolfgang Betz |
0:4fb29d9ee571 | 45 | * @{ |
| Wolfgang Betz |
0:4fb29d9ee571 | 46 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 47 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 48 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 49 | /** @addtogroup SPIRIT_Gpio |
| Wolfgang Betz |
0:4fb29d9ee571 | 50 | * @{ |
| Wolfgang Betz |
0:4fb29d9ee571 | 51 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 52 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 53 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 54 | /** @defgroup Gpio_Private_TypesDefinitions GPIO Private Types Definitions |
| Wolfgang Betz |
0:4fb29d9ee571 | 55 | * @{ |
| Wolfgang Betz |
0:4fb29d9ee571 | 56 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 57 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 58 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 59 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 60 | * @} |
| Wolfgang Betz |
0:4fb29d9ee571 | 61 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 62 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 63 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 64 | /** @defgroup Gpio_Private_Defines GPIO Private Defines |
| Wolfgang Betz |
0:4fb29d9ee571 | 65 | * @{ |
| Wolfgang Betz |
0:4fb29d9ee571 | 66 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 67 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 68 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 69 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 70 | * @} |
| Wolfgang Betz |
0:4fb29d9ee571 | 71 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 72 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 73 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 74 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 75 | /** @defgroup Gpio_Private_Macros GPIO Private Macros |
| Wolfgang Betz |
0:4fb29d9ee571 | 76 | * @{ |
| Wolfgang Betz |
0:4fb29d9ee571 | 77 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 78 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 79 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 80 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 81 | * @} |
| Wolfgang Betz |
0:4fb29d9ee571 | 82 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 83 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 84 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 85 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 86 | /** @defgroup Gpio_Private_Variables GPIO Private Variables |
| Wolfgang Betz |
0:4fb29d9ee571 | 87 | * @{ |
| Wolfgang Betz |
0:4fb29d9ee571 | 88 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 89 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 90 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 91 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 92 | * @} |
| Wolfgang Betz |
0:4fb29d9ee571 | 93 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 94 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 95 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 96 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 97 | /** @defgroup Gpio_Private_FunctionPrototypes GPIO Private Function Prototypes |
| Wolfgang Betz |
0:4fb29d9ee571 | 98 | * @{ |
| Wolfgang Betz |
0:4fb29d9ee571 | 99 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 100 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 101 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 102 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 103 | * @} |
| Wolfgang Betz |
0:4fb29d9ee571 | 104 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 105 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 106 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 107 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 108 | /** @defgroup Gpio_Private_Functions GPIO Private Functions |
| Wolfgang Betz |
0:4fb29d9ee571 | 109 | * @{ |
| Wolfgang Betz |
0:4fb29d9ee571 | 110 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 111 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 112 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 113 | * @brief Initializes the SPIRIT GPIOx according to the specified |
| Wolfgang Betz |
0:4fb29d9ee571 | 114 | * parameters in the pxGpioInitStruct. |
| Wolfgang Betz |
0:4fb29d9ee571 | 115 | * @param pxGpioInitStruct pointer to a SGpioInit structure that |
| Wolfgang Betz |
0:4fb29d9ee571 | 116 | * contains the configuration information for the specified SPIRIT GPIO. |
| Wolfgang Betz |
0:4fb29d9ee571 | 117 | * @retval None. |
| Wolfgang Betz |
0:4fb29d9ee571 | 118 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 119 | void SpiritGpioInit(SGpioInit* pxGpioInitStruct) |
| Wolfgang Betz |
0:4fb29d9ee571 | 120 | { |
| Wolfgang Betz |
0:4fb29d9ee571 | 121 | uint8_t tempRegValue = 0x00; |
| Wolfgang Betz |
0:4fb29d9ee571 | 122 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 123 | /* Check the parameters */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 124 | s_assert_param(IS_SPIRIT_GPIO(pxGpioInitStruct->xSpiritGpioPin)); |
| Wolfgang Betz |
0:4fb29d9ee571 | 125 | s_assert_param(IS_SPIRIT_GPIO_MODE(pxGpioInitStruct->xSpiritGpioMode)); |
| Wolfgang Betz |
0:4fb29d9ee571 | 126 | s_assert_param(IS_SPIRIT_GPIO_IO(pxGpioInitStruct->xSpiritGpioIO)); |
| Wolfgang Betz |
0:4fb29d9ee571 | 127 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 128 | tempRegValue = ((uint8_t)(pxGpioInitStruct->xSpiritGpioMode) | (uint8_t)(pxGpioInitStruct->xSpiritGpioIO)); |
| Wolfgang Betz |
0:4fb29d9ee571 | 129 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 130 | g_xStatus = SpiritSpiWriteRegisters(pxGpioInitStruct->xSpiritGpioPin, 1, &tempRegValue); |
| Wolfgang Betz |
0:4fb29d9ee571 | 131 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 132 | } |
| Wolfgang Betz |
0:4fb29d9ee571 | 133 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 134 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 135 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 136 | * @brief Enables or Disables the output of temperature sensor on SPIRIT GPIO_0. |
| Wolfgang Betz |
0:4fb29d9ee571 | 137 | * @param xNewState new state for temperature sensor. |
| Wolfgang Betz |
0:4fb29d9ee571 | 138 | * This parameter can be: S_ENABLE or S_DISABLE. |
| Wolfgang Betz |
0:4fb29d9ee571 | 139 | * @retval None. |
| Wolfgang Betz |
0:4fb29d9ee571 | 140 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 141 | void SpiritGpioTemperatureSensor(SpiritFunctionalState xNewState) |
| Wolfgang Betz |
0:4fb29d9ee571 | 142 | { |
| Wolfgang Betz |
0:4fb29d9ee571 | 143 | uint8_t tempRegValue = 0x00; |
| Wolfgang Betz |
0:4fb29d9ee571 | 144 | uint8_t gpio0tempRegValue = 0x00; |
| Wolfgang Betz |
0:4fb29d9ee571 | 145 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 146 | /* Check the parameters */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 147 | s_assert_param(IS_SPIRIT_FUNCTIONAL_STATE(xNewState)); |
| Wolfgang Betz |
0:4fb29d9ee571 | 148 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 149 | /* Reads the ANA_FUNC_CONF0 register and mask the result to enable or disable the |
| Wolfgang Betz |
0:4fb29d9ee571 | 150 | temperature sensor */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 151 | g_xStatus = SpiritSpiReadRegisters(ANA_FUNC_CONF0_BASE, 1, &tempRegValue); |
| Wolfgang Betz |
0:4fb29d9ee571 | 152 | if(xNewState == S_ENABLE) |
| Wolfgang Betz |
0:4fb29d9ee571 | 153 | { |
| Wolfgang Betz |
0:4fb29d9ee571 | 154 | tempRegValue |= TEMPERATURE_SENSOR_MASK; |
| Wolfgang Betz |
0:4fb29d9ee571 | 155 | } |
| Wolfgang Betz |
0:4fb29d9ee571 | 156 | else |
| Wolfgang Betz |
0:4fb29d9ee571 | 157 | { |
| Wolfgang Betz |
0:4fb29d9ee571 | 158 | tempRegValue &= (~TEMPERATURE_SENSOR_MASK); |
| Wolfgang Betz |
0:4fb29d9ee571 | 159 | gpio0tempRegValue = 0x0A; /* Default value */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 160 | } |
| Wolfgang Betz |
0:4fb29d9ee571 | 161 | g_xStatus = SpiritSpiWriteRegisters(ANA_FUNC_CONF0_BASE, 1, &tempRegValue); |
| Wolfgang Betz |
0:4fb29d9ee571 | 162 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 163 | /* Sets the SPIRIT GPIO_0 according to input request */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 164 | g_xStatus = SpiritSpiWriteRegisters(GPIO0_CONF_BASE, 1, &gpio0tempRegValue); |
| Wolfgang Betz |
0:4fb29d9ee571 | 165 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 166 | } |
| Wolfgang Betz |
0:4fb29d9ee571 | 167 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 168 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 169 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 170 | * @brief Forces SPIRIT GPIO_x configured as digital output, to VDD or GND. |
| Wolfgang Betz |
0:4fb29d9ee571 | 171 | * @param xGpioX Specifies the GPIO to be configured. |
| Wolfgang Betz |
0:4fb29d9ee571 | 172 | * This parameter can be one of following parameters: |
| Wolfgang Betz |
0:4fb29d9ee571 | 173 | * @arg SPIRIT_GPIO_0: SPIRIT GPIO_0 |
| Wolfgang Betz |
0:4fb29d9ee571 | 174 | * @arg SPIRIT_GPIO_1: SPIRIT GPIO_1 |
| Wolfgang Betz |
0:4fb29d9ee571 | 175 | * @arg SPIRIT_GPIO_2: SPIRIT GPIO_2 |
| Wolfgang Betz |
0:4fb29d9ee571 | 176 | * @arg SPIRIT_GPIO_3: SPIRIT GPIO_3 |
| Wolfgang Betz |
0:4fb29d9ee571 | 177 | * @param xLevel Specifies the level. |
| Wolfgang Betz |
0:4fb29d9ee571 | 178 | * This parameter can be: HIGH or LOW. |
| Wolfgang Betz |
0:4fb29d9ee571 | 179 | * @retval None. |
| Wolfgang Betz |
0:4fb29d9ee571 | 180 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 181 | void SpiritGpioSetLevel(SpiritGpioPin xGpioX, OutputLevel xLevel) |
| Wolfgang Betz |
0:4fb29d9ee571 | 182 | { |
| Wolfgang Betz |
0:4fb29d9ee571 | 183 | uint8_t tempRegValue = 0x00; |
| Wolfgang Betz |
0:4fb29d9ee571 | 184 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 185 | /* Check the parameters */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 186 | s_assert_param(IS_SPIRIT_GPIO(xGpioX)); |
| Wolfgang Betz |
0:4fb29d9ee571 | 187 | s_assert_param(IS_SPIRIT_GPIO_LEVEL(xLevel)); |
| Wolfgang Betz |
0:4fb29d9ee571 | 188 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 189 | /* Reads the SPIRIT_GPIOx register and mask the GPIO_SELECT field */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 190 | g_xStatus = SpiritSpiReadRegisters(xGpioX, 1, &tempRegValue); |
| Wolfgang Betz |
0:4fb29d9ee571 | 191 | tempRegValue &= 0x04; |
| Wolfgang Betz |
0:4fb29d9ee571 | 192 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 193 | /* Sets the value of the SPIRIT GPIO register according to the specified level */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 194 | if(xLevel == HIGH) |
| Wolfgang Betz |
0:4fb29d9ee571 | 195 | { |
| Wolfgang Betz |
0:4fb29d9ee571 | 196 | tempRegValue |= (uint8_t)SPIRIT_GPIO_DIG_OUT_VDD | (uint8_t)SPIRIT_GPIO_MODE_DIGITAL_OUTPUT_HP; |
| Wolfgang Betz |
0:4fb29d9ee571 | 197 | } |
| Wolfgang Betz |
0:4fb29d9ee571 | 198 | else |
| Wolfgang Betz |
0:4fb29d9ee571 | 199 | { |
| Wolfgang Betz |
0:4fb29d9ee571 | 200 | tempRegValue |= (uint8_t)SPIRIT_GPIO_DIG_OUT_GND | (uint8_t)SPIRIT_GPIO_MODE_DIGITAL_OUTPUT_HP; |
| Wolfgang Betz |
0:4fb29d9ee571 | 201 | } |
| Wolfgang Betz |
0:4fb29d9ee571 | 202 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 203 | /* Writes the SPIRIT GPIO register */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 204 | g_xStatus = SpiritSpiWriteRegisters(xGpioX, 1, &tempRegValue); |
| Wolfgang Betz |
0:4fb29d9ee571 | 205 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 206 | } |
| Wolfgang Betz |
0:4fb29d9ee571 | 207 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 208 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 209 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 210 | * @brief Returns output value (VDD or GND) of SPIRIT GPIO_x, when it is configured as digital output. |
| Wolfgang Betz |
0:4fb29d9ee571 | 211 | * @param xGpioX Specifies the GPIO to be read. |
| Wolfgang Betz |
0:4fb29d9ee571 | 212 | * This parameter can be one of following parameters: |
| Wolfgang Betz |
0:4fb29d9ee571 | 213 | * @arg SPIRIT_GPIO_0: SPIRIT GPIO_0 |
| Wolfgang Betz |
0:4fb29d9ee571 | 214 | * @arg SPIRIT_GPIO_1: SPIRIT GPIO_1 |
| Wolfgang Betz |
0:4fb29d9ee571 | 215 | * @arg SPIRIT_GPIO_2: SPIRIT GPIO_2 |
| Wolfgang Betz |
0:4fb29d9ee571 | 216 | * @arg SPIRIT_GPIO_3: SPIRIT GPIO_3 |
| Wolfgang Betz |
0:4fb29d9ee571 | 217 | * @retval OutputLevel Logical level of selected GPIO configured as digital output. |
| Wolfgang Betz |
0:4fb29d9ee571 | 218 | * This parameter can be: HIGH or LOW. |
| Wolfgang Betz |
0:4fb29d9ee571 | 219 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 220 | OutputLevel SpiritGpioGetLevel(SpiritGpioPin xGpioX) |
| Wolfgang Betz |
0:4fb29d9ee571 | 221 | { |
| Wolfgang Betz |
0:4fb29d9ee571 | 222 | uint8_t tempRegValue = 0x00; |
| Wolfgang Betz |
0:4fb29d9ee571 | 223 | OutputLevel level; |
| Wolfgang Betz |
0:4fb29d9ee571 | 224 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 225 | /* Check the parameters */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 226 | s_assert_param(IS_SPIRIT_GPIO(xGpioX)); |
| Wolfgang Betz |
0:4fb29d9ee571 | 227 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 228 | /* Reads the SPIRIT_GPIOx register */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 229 | g_xStatus = SpiritSpiReadRegisters(xGpioX, 1, &tempRegValue); |
| Wolfgang Betz |
0:4fb29d9ee571 | 230 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 231 | /* Mask the GPIO_SELECT field and returns the value according */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 232 | tempRegValue &= 0xF8; |
| Wolfgang Betz |
0:4fb29d9ee571 | 233 | if(tempRegValue == SPIRIT_GPIO_DIG_OUT_VDD) |
| Wolfgang Betz |
0:4fb29d9ee571 | 234 | { |
| Wolfgang Betz |
0:4fb29d9ee571 | 235 | level = HIGH; |
| Wolfgang Betz |
0:4fb29d9ee571 | 236 | } |
| Wolfgang Betz |
0:4fb29d9ee571 | 237 | else |
| Wolfgang Betz |
0:4fb29d9ee571 | 238 | { |
| Wolfgang Betz |
0:4fb29d9ee571 | 239 | level = LOW; |
| Wolfgang Betz |
0:4fb29d9ee571 | 240 | } |
| Wolfgang Betz |
0:4fb29d9ee571 | 241 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 242 | return level; |
| Wolfgang Betz |
0:4fb29d9ee571 | 243 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 244 | } |
| Wolfgang Betz |
0:4fb29d9ee571 | 245 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 246 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 247 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 248 | * @brief Enables or Disables the MCU clock output. |
| Wolfgang Betz |
0:4fb29d9ee571 | 249 | * @param xNewState new state for the MCU clock output. |
| Wolfgang Betz |
0:4fb29d9ee571 | 250 | * This parameter can be: S_ENABLE or S_DISABLE. |
| Wolfgang Betz |
0:4fb29d9ee571 | 251 | * @retval None. |
| Wolfgang Betz |
0:4fb29d9ee571 | 252 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 253 | void SpiritGpioClockOutput(SpiritFunctionalState xNewState) |
| Wolfgang Betz |
0:4fb29d9ee571 | 254 | { |
| Wolfgang Betz |
0:4fb29d9ee571 | 255 | uint8_t tempRegValue; |
| Wolfgang Betz |
0:4fb29d9ee571 | 256 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 257 | /* Check the parameters */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 258 | s_assert_param(IS_SPIRIT_FUNCTIONAL_STATE(xNewState)); |
| Wolfgang Betz |
0:4fb29d9ee571 | 259 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 260 | /* Reads the MCU_CK_CONF register and mask the result to enable or disable the clock output */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 261 | g_xStatus = SpiritSpiReadRegisters(MCU_CK_CONF_BASE, 1, &tempRegValue); |
| Wolfgang Betz |
0:4fb29d9ee571 | 262 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 263 | if(xNewState) |
| Wolfgang Betz |
0:4fb29d9ee571 | 264 | { |
| Wolfgang Betz |
0:4fb29d9ee571 | 265 | tempRegValue |= MCU_CK_ENABLE; |
| Wolfgang Betz |
0:4fb29d9ee571 | 266 | } |
| Wolfgang Betz |
0:4fb29d9ee571 | 267 | else |
| Wolfgang Betz |
0:4fb29d9ee571 | 268 | { |
| Wolfgang Betz |
0:4fb29d9ee571 | 269 | tempRegValue &= (~MCU_CK_ENABLE); |
| Wolfgang Betz |
0:4fb29d9ee571 | 270 | } |
| Wolfgang Betz |
0:4fb29d9ee571 | 271 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 272 | /* Writes the MCU_CK_CONF register */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 273 | g_xStatus = SpiritSpiWriteRegisters(MCU_CK_CONF_BASE, 1, &tempRegValue); |
| Wolfgang Betz |
0:4fb29d9ee571 | 274 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 275 | } |
| Wolfgang Betz |
0:4fb29d9ee571 | 276 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 277 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 278 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 279 | * @brief Initializes the SPIRIT Clock Output according to the specified |
| Wolfgang Betz |
0:4fb29d9ee571 | 280 | * parameters in the xClockOutputInitStruct. |
| Wolfgang Betz |
0:4fb29d9ee571 | 281 | * @param pxClockOutputInitStruct pointer to a ClockOutputInit structure that |
| Wolfgang Betz |
0:4fb29d9ee571 | 282 | * contains the configuration information for the SPIRIT Clock Output. |
| Wolfgang Betz |
0:4fb29d9ee571 | 283 | * @retval None. |
| Wolfgang Betz |
0:4fb29d9ee571 | 284 | * @note The function SpiritGpioClockOutput() must be called in order to enable |
| Wolfgang Betz |
0:4fb29d9ee571 | 285 | * or disable the MCU clock dividers. |
| Wolfgang Betz |
0:4fb29d9ee571 | 286 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 287 | void SpiritGpioClockOutputInit(ClockOutputInit* pxClockOutputInitStruct) |
| Wolfgang Betz |
0:4fb29d9ee571 | 288 | { |
| Wolfgang Betz |
0:4fb29d9ee571 | 289 | uint8_t tempRegValue = 0x00; |
| Wolfgang Betz |
0:4fb29d9ee571 | 290 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 291 | /* Check the parameters */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 292 | s_assert_param(IS_SPIRIT_CLOCK_OUTPUT_XO(pxClockOutputInitStruct->xClockOutputXOPrescaler)); |
| Wolfgang Betz |
0:4fb29d9ee571 | 293 | s_assert_param(IS_SPIRIT_CLOCK_OUTPUT_RCO(pxClockOutputInitStruct->xClockOutputRCOPrescaler)); |
| Wolfgang Betz |
0:4fb29d9ee571 | 294 | s_assert_param(IS_SPIRIT_CLOCK_OUTPUT_EXTRA_CYCLES(pxClockOutputInitStruct->xExtraClockCycles)); |
| Wolfgang Betz |
0:4fb29d9ee571 | 295 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 296 | /* Calculates the register value to write according to the specified configuration */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 297 | tempRegValue = ((uint8_t)(pxClockOutputInitStruct->xClockOutputXOPrescaler) | (uint8_t)(pxClockOutputInitStruct->xClockOutputRCOPrescaler) | \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 298 | (uint8_t)(pxClockOutputInitStruct->xExtraClockCycles)); |
| Wolfgang Betz |
0:4fb29d9ee571 | 299 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 300 | /* Writes the MCU_CLOCK register */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 301 | g_xStatus = SpiritSpiWriteRegisters(MCU_CK_CONF_BASE, 1, &tempRegValue); |
| Wolfgang Betz |
0:4fb29d9ee571 | 302 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 303 | } |
| Wolfgang Betz |
0:4fb29d9ee571 | 304 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 305 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 306 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 307 | * @brief Sets the XO ratio as clock output. |
| Wolfgang Betz |
0:4fb29d9ee571 | 308 | * @param xXOPrescaler the XO prescaler to be used as clock output. |
| Wolfgang Betz |
0:4fb29d9ee571 | 309 | * This parameter can be any value of @ref ClockOutputXOPrescaler . |
| Wolfgang Betz |
0:4fb29d9ee571 | 310 | * @retval None |
| Wolfgang Betz |
0:4fb29d9ee571 | 311 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 312 | void SpiritGpioSetXOPrescaler(ClockOutputXOPrescaler xXOPrescaler) |
| Wolfgang Betz |
0:4fb29d9ee571 | 313 | { |
| Wolfgang Betz |
0:4fb29d9ee571 | 314 | uint8_t tempRegValue = 0x00; |
| Wolfgang Betz |
0:4fb29d9ee571 | 315 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 316 | /* Check the parameters */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 317 | s_assert_param(IS_SPIRIT_CLOCK_OUTPUT_XO(xXOPrescaler)); |
| Wolfgang Betz |
0:4fb29d9ee571 | 318 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 319 | /* Reads the MCU_CLK_CONFIG register */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 320 | g_xStatus = SpiritSpiReadRegisters(MCU_CK_CONF_BASE, 1, &tempRegValue); |
| Wolfgang Betz |
0:4fb29d9ee571 | 321 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 322 | /* Mask the XO_RATIO field and writes the new value */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 323 | tempRegValue &= 0x61; |
| Wolfgang Betz |
0:4fb29d9ee571 | 324 | tempRegValue |= ((uint8_t)xXOPrescaler); |
| Wolfgang Betz |
0:4fb29d9ee571 | 325 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 326 | /* Writes the new XO prescaler in the MCU_CLOCK register */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 327 | g_xStatus = SpiritSpiWriteRegisters(MCU_CK_CONF_BASE, 1, &tempRegValue); |
| Wolfgang Betz |
0:4fb29d9ee571 | 328 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 329 | } |
| Wolfgang Betz |
0:4fb29d9ee571 | 330 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 331 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 332 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 333 | * @brief Returns the settled XO prescaler as clock output. |
| Wolfgang Betz |
0:4fb29d9ee571 | 334 | * @param None. |
| Wolfgang Betz |
0:4fb29d9ee571 | 335 | * @retval ClockOutputXOPrescaler Settled XO prescaler used for clock |
| Wolfgang Betz |
0:4fb29d9ee571 | 336 | * output. This parameter can be a value of @ref ClockOutputXOPrescaler . |
| Wolfgang Betz |
0:4fb29d9ee571 | 337 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 338 | ClockOutputXOPrescaler SpiritGpioGetXOPrescaler(void) |
| Wolfgang Betz |
0:4fb29d9ee571 | 339 | { |
| Wolfgang Betz |
0:4fb29d9ee571 | 340 | uint8_t tempRegValue = 0x00; |
| Wolfgang Betz |
0:4fb29d9ee571 | 341 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 342 | /* Reads the MCU_CLK_CONFIG register */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 343 | g_xStatus = SpiritSpiReadRegisters(MCU_CK_CONF_BASE, 1, &tempRegValue); |
| Wolfgang Betz |
0:4fb29d9ee571 | 344 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 345 | /* Mask the XO_RATIO field and return the value */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 346 | return ((ClockOutputXOPrescaler)(tempRegValue & 0x1E)); |
| Wolfgang Betz |
0:4fb29d9ee571 | 347 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 348 | } |
| Wolfgang Betz |
0:4fb29d9ee571 | 349 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 350 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 351 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 352 | * @brief Sets the RCO ratio as clock output |
| Wolfgang Betz |
0:4fb29d9ee571 | 353 | * @param xRCOPrescaler the RCO prescaler to be used as clock output. |
| Wolfgang Betz |
0:4fb29d9ee571 | 354 | * This parameter can be any value of @ref ClockOutputRCOPrescaler . |
| Wolfgang Betz |
0:4fb29d9ee571 | 355 | * @retval None. |
| Wolfgang Betz |
0:4fb29d9ee571 | 356 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 357 | void SpiritGpioSetRCOPrescaler(ClockOutputRCOPrescaler xRCOPrescaler) |
| Wolfgang Betz |
0:4fb29d9ee571 | 358 | { |
| Wolfgang Betz |
0:4fb29d9ee571 | 359 | uint8_t tempRegValue = 0x00; |
| Wolfgang Betz |
0:4fb29d9ee571 | 360 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 361 | /* Check the parameters */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 362 | s_assert_param(IS_SPIRIT_CLOCK_OUTPUT_RCO(xRCOPrescaler)); |
| Wolfgang Betz |
0:4fb29d9ee571 | 363 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 364 | /* Reads the MCU_CLK_CONFIG register */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 365 | g_xStatus = SpiritSpiReadRegisters(MCU_CK_CONF_BASE, 1, &tempRegValue); |
| Wolfgang Betz |
0:4fb29d9ee571 | 366 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 367 | /* Mask the RCO_RATIO field and writes the new value */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 368 | tempRegValue &= 0xFE; |
| Wolfgang Betz |
0:4fb29d9ee571 | 369 | tempRegValue |= ((uint8_t)xRCOPrescaler); |
| Wolfgang Betz |
0:4fb29d9ee571 | 370 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 371 | /* Writes the new RCO prescaler in the MCU_CLOCK register */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 372 | g_xStatus = SpiritSpiWriteRegisters(MCU_CK_CONF_BASE, 1, &tempRegValue); |
| Wolfgang Betz |
0:4fb29d9ee571 | 373 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 374 | } |
| Wolfgang Betz |
0:4fb29d9ee571 | 375 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 376 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 377 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 378 | * @brief Returns the settled RCO prescaler as clock output. |
| Wolfgang Betz |
0:4fb29d9ee571 | 379 | * @param None. |
| Wolfgang Betz |
0:4fb29d9ee571 | 380 | * @retval ClockOutputRCOPrescaler Settled RCO prescaler used for clock |
| Wolfgang Betz |
0:4fb29d9ee571 | 381 | * output. This parameter can be a value of @ref ClockOutputRCOPrescaler. |
| Wolfgang Betz |
0:4fb29d9ee571 | 382 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 383 | ClockOutputRCOPrescaler SpiritGpioGetRCOPrescaler(void) |
| Wolfgang Betz |
0:4fb29d9ee571 | 384 | { |
| Wolfgang Betz |
0:4fb29d9ee571 | 385 | uint8_t tempRegValue = 0x00; |
| Wolfgang Betz |
0:4fb29d9ee571 | 386 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 387 | /* Reads the MCU_CLK_CONFIG register */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 388 | g_xStatus = SpiritSpiReadRegisters(MCU_CK_CONF_BASE, 1, &tempRegValue); |
| Wolfgang Betz |
0:4fb29d9ee571 | 389 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 390 | /* Mask the RCO_RATIO field and returns the value */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 391 | return ((ClockOutputRCOPrescaler)(tempRegValue & 0x01)); |
| Wolfgang Betz |
0:4fb29d9ee571 | 392 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 393 | } |
| Wolfgang Betz |
0:4fb29d9ee571 | 394 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 395 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 396 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 397 | * @brief Sets the RCO ratio as clock output. |
| Wolfgang Betz |
0:4fb29d9ee571 | 398 | * @param xExtraCycles the number of extra clock cycles provided before switching |
| Wolfgang Betz |
0:4fb29d9ee571 | 399 | * to STANDBY state. This parameter can be any value of @ref ExtraClockCycles . |
| Wolfgang Betz |
0:4fb29d9ee571 | 400 | * @retval None. |
| Wolfgang Betz |
0:4fb29d9ee571 | 401 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 402 | void SpiritGpioSetExtraClockCycles(ExtraClockCycles xExtraCycles) |
| Wolfgang Betz |
0:4fb29d9ee571 | 403 | { |
| Wolfgang Betz |
0:4fb29d9ee571 | 404 | uint8_t tempRegValue = 0x00; |
| Wolfgang Betz |
0:4fb29d9ee571 | 405 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 406 | /* Check the parameters */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 407 | s_assert_param(IS_SPIRIT_CLOCK_OUTPUT_EXTRA_CYCLES(xExtraCycles)); |
| Wolfgang Betz |
0:4fb29d9ee571 | 408 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 409 | /* Reads the MCU_CLK_CONFIG register */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 410 | g_xStatus = SpiritSpiReadRegisters(MCU_CK_CONF_BASE, 1, &tempRegValue); |
| Wolfgang Betz |
0:4fb29d9ee571 | 411 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 412 | /* Mask the CLOCK_TAIL field and writes the new value */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 413 | tempRegValue &= 0x9F; |
| Wolfgang Betz |
0:4fb29d9ee571 | 414 | tempRegValue |= ((uint8_t)xExtraCycles); |
| Wolfgang Betz |
0:4fb29d9ee571 | 415 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 416 | /* Writes the new number of extra clock cycles in the MCU_CLOCK register */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 417 | g_xStatus = SpiritSpiWriteRegisters(MCU_CK_CONF_BASE, 1, &tempRegValue); |
| Wolfgang Betz |
0:4fb29d9ee571 | 418 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 419 | } |
| Wolfgang Betz |
0:4fb29d9ee571 | 420 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 421 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 422 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 423 | * @brief Returns the settled RCO prescaler as clock output. |
| Wolfgang Betz |
0:4fb29d9ee571 | 424 | * @param None. |
| Wolfgang Betz |
0:4fb29d9ee571 | 425 | * @retval ExtraClockCycles Settled number of extra clock cycles |
| Wolfgang Betz |
0:4fb29d9ee571 | 426 | * provided before switching to STANDBY state. This parameter can be |
| Wolfgang Betz |
0:4fb29d9ee571 | 427 | * any value of @ref ExtraClockCycles . |
| Wolfgang Betz |
0:4fb29d9ee571 | 428 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 429 | ExtraClockCycles SpiritGpioGetExtraClockCycles(void) |
| Wolfgang Betz |
0:4fb29d9ee571 | 430 | { |
| Wolfgang Betz |
0:4fb29d9ee571 | 431 | uint8_t tempRegValue = 0x00; |
| Wolfgang Betz |
0:4fb29d9ee571 | 432 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 433 | /* Reads the MCU_CLK_CONFIG register */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 434 | g_xStatus = SpiritSpiReadRegisters(MCU_CK_CONF_BASE, 1, &tempRegValue); |
| Wolfgang Betz |
0:4fb29d9ee571 | 435 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 436 | /* Mask the CLOCK_TAIL field and returns the value */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 437 | return ((ExtraClockCycles)(tempRegValue & 0x60)); |
| Wolfgang Betz |
0:4fb29d9ee571 | 438 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 439 | } |
| Wolfgang Betz |
0:4fb29d9ee571 | 440 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 441 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 442 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 443 | * @} |
| Wolfgang Betz |
0:4fb29d9ee571 | 444 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 445 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 446 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 447 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 448 | * @} |
| Wolfgang Betz |
0:4fb29d9ee571 | 449 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 450 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 451 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 452 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 453 | * @} |
| Wolfgang Betz |
0:4fb29d9ee571 | 454 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 455 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 456 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 457 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 458 | /******************* (C) COPYRIGHT 2015 STMicroelectronics *****END OF FILE****/ |
Repository toolbox
| Export to desktop IDE |
Repository details
| Type: | Library |
|---|---|
| Created: | 05 Jul 2017 |
| Imports: | 273 |
| Forks: | 2 |
| Commits: | 83 |
| Dependents: | 0 |
| Dependencies: | 0 |
| Followers: | 410 |
The code in this repository is Apache licensed.
Components
X-NUCLEO-IDS01A4 Sub-1GHz RF Expansion Board