ST
Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.
Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo
Currently supported boards:
Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:
- Unmount resistor
R4 - Mount resistor
R7
Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!
This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).
libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_Gpio.h@0:4fb29d9ee571, 2016-10-13 (annotated)
- Committer:
- Wolfgang Betz
- Date:
- Thu Oct 13 15:41:39 2016 +0200
- Revision:
- 0:4fb29d9ee571
First compiling version (without warnings)
Who changed what in which revision?
| User | Revision | Line number | New contents of line |
|---|---|---|---|
| Wolfgang Betz |
0:4fb29d9ee571 | 1 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 2 | ****************************************************************************** |
| Wolfgang Betz |
0:4fb29d9ee571 | 3 | * @file SPIRIT_Gpio.h |
| Wolfgang Betz |
0:4fb29d9ee571 | 4 | * @author VMA division - AMS |
| Wolfgang Betz |
0:4fb29d9ee571 | 5 | * @version 3.2.2 |
| Wolfgang Betz |
0:4fb29d9ee571 | 6 | * @date 08-July-2015 |
| Wolfgang Betz |
0:4fb29d9ee571 | 7 | * @brief This file provides all the low level API to manage SPIRIT GPIO. |
| Wolfgang Betz |
0:4fb29d9ee571 | 8 | * |
| Wolfgang Betz |
0:4fb29d9ee571 | 9 | * @details |
| Wolfgang Betz |
0:4fb29d9ee571 | 10 | * |
| Wolfgang Betz |
0:4fb29d9ee571 | 11 | * This module can be used to configure the Spirit GPIO pins to perform |
| Wolfgang Betz |
0:4fb29d9ee571 | 12 | * specific functions. |
| Wolfgang Betz |
0:4fb29d9ee571 | 13 | * The structure <i>@ref gpioIRQ</i> can be used to specify these features for |
| Wolfgang Betz |
0:4fb29d9ee571 | 14 | * one of the four Spirit Gpio pin. |
| Wolfgang Betz |
0:4fb29d9ee571 | 15 | * The following example shows how to configure a pin (GPIO 3) to be used as an IRQ source |
| Wolfgang Betz |
0:4fb29d9ee571 | 16 | * for a microcontroller using the <i>@ref SpiritGpioInit()</i> function. |
| Wolfgang Betz |
0:4fb29d9ee571 | 17 | * |
| Wolfgang Betz |
0:4fb29d9ee571 | 18 | * <b>Example:</b> |
| Wolfgang Betz |
0:4fb29d9ee571 | 19 | * @code |
| Wolfgang Betz |
0:4fb29d9ee571 | 20 | * |
| Wolfgang Betz |
0:4fb29d9ee571 | 21 | * SGpioInit gpioIRQ={ |
| Wolfgang Betz |
0:4fb29d9ee571 | 22 | * SPIRIT_GPIO_3, |
| Wolfgang Betz |
0:4fb29d9ee571 | 23 | * SPIRIT_GPIO_MODE_DIGITAL_OUTPUT_LP, |
| Wolfgang Betz |
0:4fb29d9ee571 | 24 | * SPIRIT_GPIO_DIG_OUT_IRQ |
| Wolfgang Betz |
0:4fb29d9ee571 | 25 | * }; |
| Wolfgang Betz |
0:4fb29d9ee571 | 26 | * |
| Wolfgang Betz |
0:4fb29d9ee571 | 27 | * ... |
| Wolfgang Betz |
0:4fb29d9ee571 | 28 | * |
| Wolfgang Betz |
0:4fb29d9ee571 | 29 | * SpiritGpioInit(&gpioIRQ); |
| Wolfgang Betz |
0:4fb29d9ee571 | 30 | * |
| Wolfgang Betz |
0:4fb29d9ee571 | 31 | * @endcode |
| Wolfgang Betz |
0:4fb29d9ee571 | 32 | * |
| Wolfgang Betz |
0:4fb29d9ee571 | 33 | * @note Please read the functions documentation for the other GPIO features. |
| Wolfgang Betz |
0:4fb29d9ee571 | 34 | * |
| Wolfgang Betz |
0:4fb29d9ee571 | 35 | * |
| Wolfgang Betz |
0:4fb29d9ee571 | 36 | * @attention |
| Wolfgang Betz |
0:4fb29d9ee571 | 37 | * |
| Wolfgang Betz |
0:4fb29d9ee571 | 38 | * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> |
| Wolfgang Betz |
0:4fb29d9ee571 | 39 | * |
| Wolfgang Betz |
0:4fb29d9ee571 | 40 | * Redistribution and use in source and binary forms, with or without modification, |
| Wolfgang Betz |
0:4fb29d9ee571 | 41 | * are permitted provided that the following conditions are met: |
| Wolfgang Betz |
0:4fb29d9ee571 | 42 | * 1. Redistributions of source code must retain the above copyright notice, |
| Wolfgang Betz |
0:4fb29d9ee571 | 43 | * this list of conditions and the following disclaimer. |
| Wolfgang Betz |
0:4fb29d9ee571 | 44 | * 2. Redistributions in binary form must reproduce the above copyright notice, |
| Wolfgang Betz |
0:4fb29d9ee571 | 45 | * this list of conditions and the following disclaimer in the documentation |
| Wolfgang Betz |
0:4fb29d9ee571 | 46 | * and/or other materials provided with the distribution. |
| Wolfgang Betz |
0:4fb29d9ee571 | 47 | * 3. Neither the name of STMicroelectronics nor the names of its contributors |
| Wolfgang Betz |
0:4fb29d9ee571 | 48 | * may be used to endorse or promote products derived from this software |
| Wolfgang Betz |
0:4fb29d9ee571 | 49 | * without specific prior written permission. |
| Wolfgang Betz |
0:4fb29d9ee571 | 50 | * |
| Wolfgang Betz |
0:4fb29d9ee571 | 51 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| Wolfgang Betz |
0:4fb29d9ee571 | 52 | * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| Wolfgang Betz |
0:4fb29d9ee571 | 53 | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| Wolfgang Betz |
0:4fb29d9ee571 | 54 | * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
| Wolfgang Betz |
0:4fb29d9ee571 | 55 | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| Wolfgang Betz |
0:4fb29d9ee571 | 56 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
| Wolfgang Betz |
0:4fb29d9ee571 | 57 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
| Wolfgang Betz |
0:4fb29d9ee571 | 58 | * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
| Wolfgang Betz |
0:4fb29d9ee571 | 59 | * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| Wolfgang Betz |
0:4fb29d9ee571 | 60 | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| Wolfgang Betz |
0:4fb29d9ee571 | 61 | * |
| Wolfgang Betz |
0:4fb29d9ee571 | 62 | ****************************************************************************** |
| Wolfgang Betz |
0:4fb29d9ee571 | 63 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 64 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 65 | /* Define to prevent recursive inclusion -------------------------------------*/ |
| Wolfgang Betz |
0:4fb29d9ee571 | 66 | #ifndef __SPIRIT_GPIO_H |
| Wolfgang Betz |
0:4fb29d9ee571 | 67 | #define __SPIRIT_GPIO_H |
| Wolfgang Betz |
0:4fb29d9ee571 | 68 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 69 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 70 | /* Includes ------------------------------------------------------------------*/ |
| Wolfgang Betz |
0:4fb29d9ee571 | 71 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 72 | #include "SPIRIT_Regs.h" |
| Wolfgang Betz |
0:4fb29d9ee571 | 73 | #include "SPIRIT_Types.h" |
| Wolfgang Betz |
0:4fb29d9ee571 | 74 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 75 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 76 | #ifdef __cplusplus |
| Wolfgang Betz |
0:4fb29d9ee571 | 77 | extern "C" { |
| Wolfgang Betz |
0:4fb29d9ee571 | 78 | #endif |
| Wolfgang Betz |
0:4fb29d9ee571 | 79 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 80 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 81 | /** @addtogroup SPIRIT_Libraries |
| Wolfgang Betz |
0:4fb29d9ee571 | 82 | * @{ |
| Wolfgang Betz |
0:4fb29d9ee571 | 83 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 84 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 85 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 86 | /** @defgroup SPIRIT_Gpio GPIO |
| Wolfgang Betz |
0:4fb29d9ee571 | 87 | * @brief Configuration and management of SPIRIT GPIO. |
| Wolfgang Betz |
0:4fb29d9ee571 | 88 | * @details See the file <i>@ref SPIRIT_Gpio.h</i> for more details. |
| Wolfgang Betz |
0:4fb29d9ee571 | 89 | * @{ |
| Wolfgang Betz |
0:4fb29d9ee571 | 90 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 91 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 92 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 93 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 94 | /** @defgroup Gpio_Exported_Types GPIO Exported Types |
| Wolfgang Betz |
0:4fb29d9ee571 | 95 | * @{ |
| Wolfgang Betz |
0:4fb29d9ee571 | 96 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 97 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 98 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 99 | * @brief SPIRIT GPIO pin enumeration. |
| Wolfgang Betz |
0:4fb29d9ee571 | 100 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 101 | typedef enum |
| Wolfgang Betz |
0:4fb29d9ee571 | 102 | { |
| Wolfgang Betz |
0:4fb29d9ee571 | 103 | SPIRIT_GPIO_0 = GPIO0_CONF_BASE, /*!< GPIO_0 selected */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 104 | SPIRIT_GPIO_1 = GPIO1_CONF_BASE, /*!< GPIO_1 selected */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 105 | SPIRIT_GPIO_2 = GPIO2_CONF_BASE, /*!< GPIO_2 selected */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 106 | SPIRIT_GPIO_3 = GPIO3_CONF_BASE /*!< GPIO_3 selected */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 107 | }SpiritGpioPin; |
| Wolfgang Betz |
0:4fb29d9ee571 | 108 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 109 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 110 | #define IS_SPIRIT_GPIO(PIN) ((PIN == SPIRIT_GPIO_0) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 111 | (PIN == SPIRIT_GPIO_1) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 112 | (PIN == SPIRIT_GPIO_2) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 113 | (PIN == SPIRIT_GPIO_3)) |
| Wolfgang Betz |
0:4fb29d9ee571 | 114 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 115 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 116 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 117 | * @brief SPIRIT GPIO mode enumeration. |
| Wolfgang Betz |
0:4fb29d9ee571 | 118 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 119 | typedef enum |
| Wolfgang Betz |
0:4fb29d9ee571 | 120 | { |
| Wolfgang Betz |
0:4fb29d9ee571 | 121 | SPIRIT_GPIO_MODE_DIGITAL_INPUT = 0x01, /*!< Digital Input on GPIO */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 122 | SPIRIT_GPIO_MODE_DIGITAL_OUTPUT_LP = 0x02, /*!< Digital Output on GPIO (low current) */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 123 | SPIRIT_GPIO_MODE_DIGITAL_OUTPUT_HP = 0x03 /*!< Digital Output on GPIO (high current) */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 124 | }SpiritGpioMode; |
| Wolfgang Betz |
0:4fb29d9ee571 | 125 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 126 | #define IS_SPIRIT_GPIO_MODE(MODE) ((MODE == SPIRIT_GPIO_MODE_DIGITAL_INPUT) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 127 | (MODE == SPIRIT_GPIO_MODE_DIGITAL_OUTPUT_LP) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 128 | (MODE == SPIRIT_GPIO_MODE_DIGITAL_OUTPUT_HP)) |
| Wolfgang Betz |
0:4fb29d9ee571 | 129 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 130 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 131 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 132 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 133 | * @brief SPIRIT I/O selection enumeration. |
| Wolfgang Betz |
0:4fb29d9ee571 | 134 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 135 | typedef enum |
| Wolfgang Betz |
0:4fb29d9ee571 | 136 | { |
| Wolfgang Betz |
0:4fb29d9ee571 | 137 | SPIRIT_GPIO_DIG_OUT_IRQ = 0x00, /*!< nIRQ (Interrupt Request, active low) , default configuration after POR */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 138 | SPIRIT_GPIO_DIG_OUT_POR_INV = 0x08, /*!< POR inverted (active low) */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 139 | SPIRIT_GPIO_DIG_OUT_WUT_EXP = 0x10, /*!< Wake-Up Timer expiration: "1" when WUT has expired */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 140 | SPIRIT_GPIO_DIG_OUT_LBD = 0x18, /*!< Low battery detection: "1" when battery is below threshold setting */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 141 | SPIRIT_GPIO_DIG_OUT_TX_DATA = 0x20, /*!< TX data internal clock output (TX data are sampled on the rising edge of it) */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 142 | SPIRIT_GPIO_DIG_OUT_TX_STATE = 0x28, /*!< TX state indication: "1" when Spirit1 is passing in the TX state */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 143 | SPIRIT_GPIO_DIG_OUT_TX_FIFO_ALMOST_EMPTY = 0x30, /*!< TX FIFO Almost Empty Flag */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 144 | SPIRIT_GPIO_DIG_OUT_TX_FIFO_ALMOST_FULL = 0x38, /*!< TX FIFO Almost Full Flag */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 145 | SPIRIT_GPIO_DIG_OUT_RX_DATA = 0x40, /*!< RX data output */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 146 | SPIRIT_GPIO_DIG_OUT_RX_CLOCK = 0x48, /*!< RX clock output (recovered from received data) */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 147 | SPIRIT_GPIO_DIG_OUT_RX_STATE = 0x50, /*!< RX state indication: "1" when Spirit1 is passing in the RX state */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 148 | SPIRIT_GPIO_DIG_OUT_RX_FIFO_ALMOST_FULL = 0x58, /*!< RX FIFO Almost Full Flag */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 149 | SPIRIT_GPIO_DIG_OUT_RX_FIFO_ALMOST_EMPTY = 0x60, /*!< RX FIFO Almost Empty Flag */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 150 | SPIRIT_GPIO_DIG_OUT_ANTENNA_SWITCH = 0x68, /*!< Antenna switch used for antenna diversity */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 151 | SPIRIT_GPIO_DIG_OUT_VALID_PREAMBLE = 0x70, /*!< Valid Preamble Detected Flag */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 152 | SPIRIT_GPIO_DIG_OUT_SYNC_DETECTED = 0x78, /*!< Sync WordSync Word Detected Flag */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 153 | SPIRIT_GPIO_DIG_OUT_RSSI_THRESHOLD = 0x80, /*!< RSSI above threshold */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 154 | SPIRIT_GPIO_DIG_OUT_MCU_CLOCK = 0x88, /*!< MCU Clock */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 155 | SPIRIT_GPIO_DIG_OUT_TX_RX_MODE = 0x90, /*!< TX or RX mode indicator (to enable an external range extender) */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 156 | SPIRIT_GPIO_DIG_OUT_VDD = 0x98, /*!< VDD (to emulate an additional GPIO of the MCU, programmable by SPI) */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 157 | SPIRIT_GPIO_DIG_OUT_GND = 0xA0, /*!< GND (to emulate an additional GPIO of the MCU, programmable by SPI) */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 158 | SPIRIT_GPIO_DIG_OUT_SMPS_EXT = 0xA8, /*!< External SMPS enable signal (active high) */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 159 | SPIRIT_GPIO_DIG_OUT_SLEEP_OR_STANDBY = 0xB0, |
| Wolfgang Betz |
0:4fb29d9ee571 | 160 | SPIRIT_GPIO_DIG_OUT_READY = 0xB8, |
| Wolfgang Betz |
0:4fb29d9ee571 | 161 | SPIRIT_GPIO_DIG_OUT_LOCK = 0xC0, |
| Wolfgang Betz |
0:4fb29d9ee571 | 162 | SPIRIT_GPIO_DIG_OUT_WAIT_FOR_LOCK_SIG = 0xC8, |
| Wolfgang Betz |
0:4fb29d9ee571 | 163 | SPIRIT_GPIO_DIG_OUT_WAIT_FOR_TIMER_FOR_LOCK = 0xD0, |
| Wolfgang Betz |
0:4fb29d9ee571 | 164 | SPIRIT_GPIO_DIG_OUT_WAIT_FOR_READY2_SIG = 0xD8, |
| Wolfgang Betz |
0:4fb29d9ee571 | 165 | SPIRIT_GPIO_DIG_OUT_WAIT_FOR_TIMER_FOR_PM_SET = 0xE0, |
| Wolfgang Betz |
0:4fb29d9ee571 | 166 | SPIRIT_GPIO_DIG_OUT_WAIT_VCO_CALIBRATION = 0xE8, |
| Wolfgang Betz |
0:4fb29d9ee571 | 167 | SPIRIT_GPIO_DIG_OUT_ENABLE_SYNTH_FULL_CIRCUIT = 0xF0, |
| Wolfgang Betz |
0:4fb29d9ee571 | 168 | SPIRIT_GPIO_DIG_OUT_WAIT_FOR_RCCAL_OK_SIG = 0xFF, |
| Wolfgang Betz |
0:4fb29d9ee571 | 169 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 170 | SPIRIT_GPIO_DIG_IN_TX_COMMAND = 0x00, |
| Wolfgang Betz |
0:4fb29d9ee571 | 171 | SPIRIT_GPIO_DIG_IN_RX_COMMAND = 0x08, |
| Wolfgang Betz |
0:4fb29d9ee571 | 172 | SPIRIT_GPIO_DIG_IN_TX_DATA_INPUT_FOR_DIRECTRF = 0x10, |
| Wolfgang Betz |
0:4fb29d9ee571 | 173 | SPIRIT_GPIO_DIG_IN_DATA_WAKEUP = 0x18, |
| Wolfgang Betz |
0:4fb29d9ee571 | 174 | SPIRIT_GPIO_DIG_IN_EXT_CLOCK_AT_34_7KHZ = 0x20 |
| Wolfgang Betz |
0:4fb29d9ee571 | 175 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 176 | }SpiritGpioIO; |
| Wolfgang Betz |
0:4fb29d9ee571 | 177 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 178 | #define IS_SPIRIT_GPIO_IO(IO_SEL) ((IO_SEL == SPIRIT_GPIO_DIG_OUT_IRQ) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 179 | (IO_SEL == SPIRIT_GPIO_DIG_OUT_POR_INV) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 180 | (IO_SEL == SPIRIT_GPIO_DIG_OUT_WUT_EXP) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 181 | (IO_SEL == SPIRIT_GPIO_DIG_OUT_LBD) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 182 | (IO_SEL == SPIRIT_GPIO_DIG_OUT_TX_DATA) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 183 | (IO_SEL == SPIRIT_GPIO_DIG_OUT_TX_STATE) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 184 | (IO_SEL == SPIRIT_GPIO_DIG_OUT_TX_FIFO_ALMOST_EMPTY) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 185 | (IO_SEL == SPIRIT_GPIO_DIG_OUT_TX_FIFO_ALMOST_FULL) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 186 | (IO_SEL == SPIRIT_GPIO_DIG_OUT_RX_DATA) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 187 | (IO_SEL == SPIRIT_GPIO_DIG_OUT_RX_CLOCK) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 188 | (IO_SEL == SPIRIT_GPIO_DIG_OUT_RX_STATE) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 189 | (IO_SEL == SPIRIT_GPIO_DIG_OUT_RX_FIFO_ALMOST_FULL) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 190 | (IO_SEL == SPIRIT_GPIO_DIG_OUT_RX_FIFO_ALMOST_EMPTY) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 191 | (IO_SEL == SPIRIT_GPIO_DIG_OUT_ANTENNA_SWITCH) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 192 | (IO_SEL == SPIRIT_GPIO_DIG_OUT_VALID_PREAMBLE) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 193 | (IO_SEL == SPIRIT_GPIO_DIG_OUT_SYNC_DETECTED) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 194 | (IO_SEL == SPIRIT_GPIO_DIG_OUT_RSSI_THRESHOLD) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 195 | (IO_SEL == SPIRIT_GPIO_DIG_OUT_MCU_CLOCK) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 196 | (IO_SEL == SPIRIT_GPIO_DIG_OUT_TX_RX_MODE) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 197 | (IO_SEL == SPIRIT_GPIO_DIG_OUT_VDD) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 198 | (IO_SEL == SPIRIT_GPIO_DIG_OUT_GND) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 199 | (IO_SEL == SPIRIT_GPIO_DIG_OUT_SMPS_EXT) ||\ |
| Wolfgang Betz |
0:4fb29d9ee571 | 200 | (IO_SEL == SPIRIT_GPIO_DIG_OUT_SLEEP_OR_STANDBY) ||\ |
| Wolfgang Betz |
0:4fb29d9ee571 | 201 | (IO_SEL == SPIRIT_GPIO_DIG_OUT_READY) ||\ |
| Wolfgang Betz |
0:4fb29d9ee571 | 202 | (IO_SEL == SPIRIT_GPIO_DIG_OUT_LOCK) ||\ |
| Wolfgang Betz |
0:4fb29d9ee571 | 203 | (IO_SEL == SPIRIT_GPIO_DIG_OUT_WAIT_FOR_LOCK_SIG) ||\ |
| Wolfgang Betz |
0:4fb29d9ee571 | 204 | (IO_SEL == SPIRIT_GPIO_DIG_OUT_WAIT_FOR_TIMER_FOR_LOCK) ||\ |
| Wolfgang Betz |
0:4fb29d9ee571 | 205 | (IO_SEL == SPIRIT_GPIO_DIG_OUT_WAIT_FOR_READY2_SIG) ||\ |
| Wolfgang Betz |
0:4fb29d9ee571 | 206 | (IO_SEL == SPIRIT_GPIO_DIG_OUT_WAIT_FOR_TIMER_FOR_PM_SET) ||\ |
| Wolfgang Betz |
0:4fb29d9ee571 | 207 | (IO_SEL == SPIRIT_GPIO_DIG_OUT_WAIT_VCO_CALIBRATION) ||\ |
| Wolfgang Betz |
0:4fb29d9ee571 | 208 | (IO_SEL == SPIRIT_GPIO_DIG_OUT_ENABLE_SYNTH_FULL_CIRCUIT) ||\ |
| Wolfgang Betz |
0:4fb29d9ee571 | 209 | (IO_SEL == SPIRIT_GPIO_DIG_OUT_WAIT_FOR_RCCAL_OK_SIG) ||\ |
| Wolfgang Betz |
0:4fb29d9ee571 | 210 | (IO_SEL == SPIRIT_GPIO_DIG_IN_TX_COMMAND) ||\ |
| Wolfgang Betz |
0:4fb29d9ee571 | 211 | (IO_SEL == SPIRIT_GPIO_DIG_IN_RX_COMMAND) ||\ |
| Wolfgang Betz |
0:4fb29d9ee571 | 212 | (IO_SEL == SPIRIT_GPIO_DIG_IN_TX_DATA_INPUT_FOR_DIRECTRF) ||\ |
| Wolfgang Betz |
0:4fb29d9ee571 | 213 | (IO_SEL == SPIRIT_GPIO_DIG_IN_DATA_WAKEUP) ||\ |
| Wolfgang Betz |
0:4fb29d9ee571 | 214 | (IO_SEL == SPIRIT_GPIO_DIG_IN_EXT_CLOCK_AT_34_7KHZ)) |
| Wolfgang Betz |
0:4fb29d9ee571 | 215 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 216 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 217 | * @brief SPIRIT OutputLevel enumeration. |
| Wolfgang Betz |
0:4fb29d9ee571 | 218 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 219 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 220 | typedef enum |
| Wolfgang Betz |
0:4fb29d9ee571 | 221 | { |
| Wolfgang Betz |
0:4fb29d9ee571 | 222 | LOW = 0, |
| Wolfgang Betz |
0:4fb29d9ee571 | 223 | HIGH = !LOW |
| Wolfgang Betz |
0:4fb29d9ee571 | 224 | }OutputLevel; |
| Wolfgang Betz |
0:4fb29d9ee571 | 225 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 226 | #define IS_SPIRIT_GPIO_LEVEL(LEVEL) ((LEVEL == LOW) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 227 | (LEVEL == HIGH)) |
| Wolfgang Betz |
0:4fb29d9ee571 | 228 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 229 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 230 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 231 | * @brief SPIRIT GPIO Init structure definition. |
| Wolfgang Betz |
0:4fb29d9ee571 | 232 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 233 | typedef struct |
| Wolfgang Betz |
0:4fb29d9ee571 | 234 | { |
| Wolfgang Betz |
0:4fb29d9ee571 | 235 | SpiritGpioPin xSpiritGpioPin; /*!< Specifies the GPIO pins to be configured. |
| Wolfgang Betz |
0:4fb29d9ee571 | 236 | This parameter can be any value of @ref SpiritGpioPin */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 237 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 238 | SpiritGpioMode xSpiritGpioMode; /*!< Specifies the operating mode for the selected pins. |
| Wolfgang Betz |
0:4fb29d9ee571 | 239 | This parameter can be a value of @ref SpiritGpioMode */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 240 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 241 | SpiritGpioIO xSpiritGpioIO; /*!< Specifies the I/O selection for the selected pins. |
| Wolfgang Betz |
0:4fb29d9ee571 | 242 | This parameter can be a value of @ref SpiritGpioIO */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 243 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 244 | }SGpioInit; |
| Wolfgang Betz |
0:4fb29d9ee571 | 245 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 246 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 247 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 248 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 249 | * @brief SPIRIT clock output XO prescaler enumeration. |
| Wolfgang Betz |
0:4fb29d9ee571 | 250 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 251 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 252 | typedef enum |
| Wolfgang Betz |
0:4fb29d9ee571 | 253 | { |
| Wolfgang Betz |
0:4fb29d9ee571 | 254 | XO_RATIO_1 = 0x00, /*!< XO Clock signal available on the GPIO divided by 1 */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 255 | XO_RATIO_2_3 = 0x02, /*!< XO Clock signal available on the GPIO divided by 2/3 */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 256 | XO_RATIO_1_2 = 0x04, /*!< XO Clock signal available on the GPIO divided by 1/2 */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 257 | XO_RATIO_1_3 = 0x06, /*!< XO Clock signal available on the GPIO divided by 1/3 */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 258 | XO_RATIO_1_4 = 0x08, /*!< XO Clock signal available on the GPIO divided by 1/4 */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 259 | XO_RATIO_1_6 = 0x0A, /*!< XO Clock signal available on the GPIO divided by 1/6 */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 260 | XO_RATIO_1_8 = 0x0C, /*!< XO Clock signal available on the GPIO divided by 1/8 */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 261 | XO_RATIO_1_12 = 0x0E, /*!< XO Clock signal available on the GPIO divided by 1/12 */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 262 | XO_RATIO_1_16 = 0x10, /*!< XO Clock signal available on the GPIO divided by 1/16 */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 263 | XO_RATIO_1_24 = 0x12, /*!< XO Clock signal available on the GPIO divided by 1/24 */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 264 | XO_RATIO_1_36 = 0x14, /*!< XO Clock signal available on the GPIO divided by 1/36 */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 265 | XO_RATIO_1_48 = 0x16, /*!< XO Clock signal available on the GPIO divided by 1/48 */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 266 | XO_RATIO_1_64 = 0x18, /*!< XO Clock signal available on the GPIO divided by 1/64 */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 267 | XO_RATIO_1_96 = 0x1A, /*!< XO Clock signal available on the GPIO divided by 1/96 */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 268 | XO_RATIO_1_128 = 0x1C, /*!< XO Clock signal available on the GPIO divided by 1/128 */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 269 | XO_RATIO_1_192 = 0x1E /*!< XO Clock signal available on the GPIO divided by 1/196 */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 270 | }ClockOutputXOPrescaler; |
| Wolfgang Betz |
0:4fb29d9ee571 | 271 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 272 | #define IS_SPIRIT_CLOCK_OUTPUT_XO(RATIO) ((RATIO == XO_RATIO_1) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 273 | (RATIO == XO_RATIO_2_3) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 274 | (RATIO == XO_RATIO_1_2) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 275 | (RATIO == XO_RATIO_1_3) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 276 | (RATIO == XO_RATIO_1_4) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 277 | (RATIO == XO_RATIO_1_6) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 278 | (RATIO == XO_RATIO_1_8) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 279 | (RATIO == XO_RATIO_1_12) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 280 | (RATIO == XO_RATIO_1_16) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 281 | (RATIO == XO_RATIO_1_24) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 282 | (RATIO == XO_RATIO_1_36) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 283 | (RATIO == XO_RATIO_1_48) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 284 | (RATIO == XO_RATIO_1_64) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 285 | (RATIO == XO_RATIO_1_96) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 286 | (RATIO == XO_RATIO_1_128) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 287 | (RATIO == XO_RATIO_1_192)) |
| Wolfgang Betz |
0:4fb29d9ee571 | 288 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 289 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 290 | * @brief SPIRIT Clock Output RCO prescaler enumeration. |
| Wolfgang Betz |
0:4fb29d9ee571 | 291 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 292 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 293 | typedef enum |
| Wolfgang Betz |
0:4fb29d9ee571 | 294 | { |
| Wolfgang Betz |
0:4fb29d9ee571 | 295 | RCO_RATIO_1 = 0x00, /*!< RCO Clock signal available on the GPIO divided by 1 */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 296 | RCO_RATIO_1_128 = 0x01 /*!< RCO Clock signal available on the GPIO divided by 1/128 */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 297 | }ClockOutputRCOPrescaler; |
| Wolfgang Betz |
0:4fb29d9ee571 | 298 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 299 | #define IS_SPIRIT_CLOCK_OUTPUT_RCO(RATIO) ((RATIO == RCO_RATIO_1) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 300 | (RATIO == RCO_RATIO_1_128)) |
| Wolfgang Betz |
0:4fb29d9ee571 | 301 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 302 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 303 | * @brief SPIRIT ExtraClockCycles enumeration. |
| Wolfgang Betz |
0:4fb29d9ee571 | 304 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 305 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 306 | typedef enum |
| Wolfgang Betz |
0:4fb29d9ee571 | 307 | { |
| Wolfgang Betz |
0:4fb29d9ee571 | 308 | EXTRA_CLOCK_CYCLES_0 = 0x00, /*!< 0 extra clock cycles provided to the MCU before switching to STANDBY state */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 309 | EXTRA_CLOCK_CYCLES_64 = 0x20, /*!< 64 extra clock cycles provided to the MCU before switching to STANDBY state */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 310 | EXTRA_CLOCK_CYCLES_256 = 0x40, /*!< 256 extra clock cycles provided to the MCU before switching to STANDBY state */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 311 | EXTRA_CLOCK_CYCLES_512 = 0x60 /*!< 512 extra clock cycles provided to the MCU before switching to STANDBY state */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 312 | }ExtraClockCycles; |
| Wolfgang Betz |
0:4fb29d9ee571 | 313 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 314 | #define IS_SPIRIT_CLOCK_OUTPUT_EXTRA_CYCLES(CYCLES) ((CYCLES == EXTRA_CLOCK_CYCLES_0) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 315 | (CYCLES == EXTRA_CLOCK_CYCLES_64) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 316 | (CYCLES == EXTRA_CLOCK_CYCLES_256) || \ |
| Wolfgang Betz |
0:4fb29d9ee571 | 317 | (CYCLES == EXTRA_CLOCK_CYCLES_512)) |
| Wolfgang Betz |
0:4fb29d9ee571 | 318 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 319 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 320 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 321 | * @brief SPIRIT Clock Output initialization structure definition. |
| Wolfgang Betz |
0:4fb29d9ee571 | 322 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 323 | typedef struct |
| Wolfgang Betz |
0:4fb29d9ee571 | 324 | { |
| Wolfgang Betz |
0:4fb29d9ee571 | 325 | ClockOutputXOPrescaler xClockOutputXOPrescaler; /*!< Specifies the XO Ratio as clock output. |
| Wolfgang Betz |
0:4fb29d9ee571 | 326 | This parameter can be any value of @ref ClockOutputXOPrescaler */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 327 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 328 | ClockOutputRCOPrescaler xClockOutputRCOPrescaler; /*!< Specifies the RCO Ratio as clock output. |
| Wolfgang Betz |
0:4fb29d9ee571 | 329 | This parameter can be a value of @ref ClockOutputRCOPrescaler */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 330 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 331 | ExtraClockCycles xExtraClockCycles; /*!< Specifies the Extra Clock Cycles provided before entering in Standby State. |
| Wolfgang Betz |
0:4fb29d9ee571 | 332 | This parameter can be a value of @ref ExtraClockCycles */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 333 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 334 | }ClockOutputInit; |
| Wolfgang Betz |
0:4fb29d9ee571 | 335 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 336 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 337 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 338 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 339 | * @} |
| Wolfgang Betz |
0:4fb29d9ee571 | 340 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 341 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 342 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 343 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 344 | /** @defgroup Gpio_Exported_Constants GPIO Exported Constants |
| Wolfgang Betz |
0:4fb29d9ee571 | 345 | * @{ |
| Wolfgang Betz |
0:4fb29d9ee571 | 346 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 347 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 348 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 349 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 350 | * @} |
| Wolfgang Betz |
0:4fb29d9ee571 | 351 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 352 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 353 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 354 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 355 | /** @defgroup Gpio_Exported_Macros GPIO Exported Macros |
| Wolfgang Betz |
0:4fb29d9ee571 | 356 | * @{ |
| Wolfgang Betz |
0:4fb29d9ee571 | 357 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 358 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 359 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 360 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 361 | * @} |
| Wolfgang Betz |
0:4fb29d9ee571 | 362 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 363 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 364 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 365 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 366 | /** @defgroup Gpio_Exported_Functions GPIO Exported Functions |
| Wolfgang Betz |
0:4fb29d9ee571 | 367 | * @{ |
| Wolfgang Betz |
0:4fb29d9ee571 | 368 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 369 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 370 | void SpiritGpioInit(SGpioInit* pxGpioInitStruct); |
| Wolfgang Betz |
0:4fb29d9ee571 | 371 | void SpiritGpioTemperatureSensor(SpiritFunctionalState xNewState); |
| Wolfgang Betz |
0:4fb29d9ee571 | 372 | void SpiritGpioSetLevel(SpiritGpioPin xGpioX, OutputLevel xLevel); |
| Wolfgang Betz |
0:4fb29d9ee571 | 373 | OutputLevel SpiritGpioGetLevel(SpiritGpioPin xGpioX); |
| Wolfgang Betz |
0:4fb29d9ee571 | 374 | void SpiritGpioClockOutput(SpiritFunctionalState xNewState); |
| Wolfgang Betz |
0:4fb29d9ee571 | 375 | void SpiritGpioClockOutputInit(ClockOutputInit* pxClockOutputInitStruct); |
| Wolfgang Betz |
0:4fb29d9ee571 | 376 | void SpiritGpioSetXOPrescaler(ClockOutputXOPrescaler xXOPrescaler); |
| Wolfgang Betz |
0:4fb29d9ee571 | 377 | ClockOutputXOPrescaler SpiritGpioGetXOPrescaler(void); |
| Wolfgang Betz |
0:4fb29d9ee571 | 378 | void SpiritGpioSetRCOPrescaler(ClockOutputRCOPrescaler xRCOPrescaler); |
| Wolfgang Betz |
0:4fb29d9ee571 | 379 | ClockOutputRCOPrescaler SpiritGpioGetRCOPrescaler(void); |
| Wolfgang Betz |
0:4fb29d9ee571 | 380 | void SpiritGpioSetExtraClockCycles(ExtraClockCycles xExtraCycles); |
| Wolfgang Betz |
0:4fb29d9ee571 | 381 | ExtraClockCycles SpiritGpioGetExtraClockCycles(void); |
| Wolfgang Betz |
0:4fb29d9ee571 | 382 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 383 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 384 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 385 | * @} |
| Wolfgang Betz |
0:4fb29d9ee571 | 386 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 387 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 388 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 389 | * @} |
| Wolfgang Betz |
0:4fb29d9ee571 | 390 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 391 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 392 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 393 | /** |
| Wolfgang Betz |
0:4fb29d9ee571 | 394 | * @} |
| Wolfgang Betz |
0:4fb29d9ee571 | 395 | */ |
| Wolfgang Betz |
0:4fb29d9ee571 | 396 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 397 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 398 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 399 | #ifdef __cplusplus |
| Wolfgang Betz |
0:4fb29d9ee571 | 400 | } |
| Wolfgang Betz |
0:4fb29d9ee571 | 401 | #endif |
| Wolfgang Betz |
0:4fb29d9ee571 | 402 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 403 | #endif |
| Wolfgang Betz |
0:4fb29d9ee571 | 404 | |
| Wolfgang Betz |
0:4fb29d9ee571 | 405 | /******************* (C) COPYRIGHT 2015 STMicroelectronics *****END OF FILE****/ |
Repository toolbox
| Export to desktop IDE |
Repository details
| Type: | Library |
|---|---|
| Created: | 05 Jul 2017 |
| Imports: | 273 |
| Forks: | 2 |
| Commits: | 83 |
| Dependents: | 0 |
| Dependencies: | 0 |
| Followers: | 410 |
The code in this repository is Apache licensed.
Components
X-NUCLEO-IDS01A4 Sub-1GHz RF Expansion Board